Korean Journal of Chemical Engineering

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

The effect of additive chemicals on the viscosity of coal-petroleum coke-water slurry fuel for a gasification process

Yoon, Sang-Jun;Choi, Young-Chan;Lee, Jae-Goo

  • Published : 20090900
⟨ Previous Next ⟩

Abstract

As a preliminary study for the gasification of an anthracite and petroleum coke mixture, viscosity was measured at various temperatures (20-50$^{\circ}C$), slurry concentrations (60-70 wt%) and additive amounts (0-0.8 wt%) by using an LV-II type viscometer. In addition, four types of different additives, sodium naphthalene sulfonate, poly(methyl methacrylate), polypropylene and a polypropylene glycol based additive, were applied to Korean anthracite, petroleum coke and mixtures of these materials, and the viscosity data were compared. Viscosity dependency values for coal, anthracite, bituminous and sub-bituminous coal, were compared, and it was found that a high content of moisture and particularly ash increases CWS viscosity. The four types of additives tested in this research can effectively diminish the viscosity of coal and especially petroleum coke-water slurry by more than 70% to 95%, respectively. Moreover, the sodium naphthalene sulfonate-based additive reduced the viscosity of coal and petroleum coke-water slurry best, especially at concentrations in excess of 65 wt%. Based on these results, highly loaded slurry created by mixing anthracite and petroleum coke with additives was achieved.

Keywords

References

  1. R. J. Crawford and D. E. Mainwaring, Fuel, 80(3), 313 (2001) https://doi.org/10.1016/S0016-2361(00)00110-1
  2. H. Kikkawa, H. Takezaki, Y. Otani and K. Shoji, Powder Technol.,55, 277 (1988) https://doi.org/10.1016/0032-5910(88)80038-X
  3. A. E. Gross, M. L. Branning and D.W. Fong, US patent, 4,462,808(1984)
  4. M. Pawlik, Colloids and Surfaces A: Physicochem. Eng. Aspects,266, 82 (2005) https://doi.org/10.1016/j.colsurfa.2005.04.043
  5. H. Cho and M. S. Klima, Energy & Fuels, 10, 1220 (1996) https://doi.org/10.1021/ef960019g
  6. A. P. Burdukov, V. I. Popov, V.G. Tomilov and V.D. Fedosenko,Fuel, 81, 927 (2002) https://doi.org/10.1016/S0016-2361(01)00009-6
  7. P. R. Choudhury, Prog. Energy Combust. Sci., 18, 409 (1992) https://doi.org/10.1016/0360-1285(92)90008-O
  8. G. Atesok, F. Boylu, A. A. Sirkeci and H. Dincer, Fuel, 81, 1855(2002) https://doi.org/10.1016/S0016-2361(02)00107-2
  9. T. Ogura, M. Tanoura and A. Hiraki, Bull. Chem. Soc. Jpn., 66, 1343(1993) https://doi.org/10.1246/bcsj.66.1343
  10. L. Z. Zhou and S.Q. Zhu, J. Chem. Ind. Eng., 55, 775 (2004)
  11. K. H. Heek, B. O. Strobel and W. Wanzl, Fuel, 73, 1135 (1994) https://doi.org/10.1016/0016-2361(94)90250-X
  12. C. Higman and M. Burgt, Gasification, Elsevier, New York (2003)
  13. J. Wang, E. J. Anthony and J. C. Abanades, Fuel, 83, 1341 (2004) https://doi.org/10.1016/j.fuel.2004.01.002
  14. Y. K. Ahn and W. H. Fischer, Int. J. Hydrogen Energy, 11, 783(1986) https://doi.org/10.1016/0360-3199(86)90174-6
  15. J. Gersten, V. Fainberg, G. Hetsconi and Y. Shidler, Fuel, 79, 1679(2000) https://doi.org/10.1016/S0016-2361(00)00002-8
  16. J.M. Jones, M. Kubacki, K. Kubica, A. B. Ross and A. Williams,J. Anal. Appl. Pyrolysis, 74, 502 (2005) https://doi.org/10.1016/j.jaap.2004.11.018
  17. B. Moghtaderi, C. Meesri and T. F. Wall, Fuel, 83, 745 (2004) https://doi.org/10.1016/j.fuel.2003.05.003
  18. I. Suelves, R. Moliner and M. J. Lazaro, J. Anal. Appl. Pyrolysis,55, 29 (2000) https://doi.org/10.1016/S0165-2370(99)00072-8
  19. Y. J. Shin and Y. H. Shen, Chemosphere, 68, 389 (2007) https://doi.org/10.1016/j.chemosphere.2006.12.049
  20. Z. Guo, R. Feng, Y. Zheng and X. Fu, Ultrason. Sonochem., 14, 583(2007) https://doi.org/10.1016/j.ultsonch.2006.12.001
  21. Z. Aktas and E. T. Woodburn, Fuel Process. Technol., 62, 1 (2000) https://doi.org/10.1016/S0378-3820(99)00059-4
  22. M. Zhou, X. Qiu, D. Yang, H. Lou and X. Ouyang, Fuel Process.Technol., 88, 375 (2007) https://doi.org/10.1016/j.fuproc.2006.11.004
  23. X. Qiu, M. Zhou, D. Yang, H. Lou, X. Ouyang and Y. Pang, Fuel,86, 1439 (2007) https://doi.org/10.1016/j.fuel.2006.11.035
  24. S. Vitolo, R. Belli, M. Mazzanti and G. Quanttroni, Fuel, 75, 259(1996) https://doi.org/10.1016/0016-2361(95)00248-0
  25. S. J. Yoon, Y. C. Choi, S. H. Lee and J. G. Lee, Korean J. Chem. Eng., 24, 512 (2007) https://doi.org/10.1007/s11814-007-0090-y