Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Thermocompression Anisothropic Conductive Films(ACFs) bonding for Flat Panel Displays(FPDs) Application

평판디스플레이를 위한 열압착법을 이용한 이방성 도전성 필름 접합

  • Published : 2009.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of temperature on ACF thermocompression bonding for FPD assembly was investigated, It was found that Au bumps on driver IC's were not bonded to the glass substrate when the bonding temperature was below $140^{\circ}C$ so bonds were made at temperatures of $163^{\circ}C$, $178^{\circ}C$ and $199^{\circ}C$ for further testing. The bonding time and pressure were constant to 3 sec and 3.038 MPa. To test bond reliability, FPD assemblies were subjected to thermal shock storage tests ($-30^{\circ}C$, $1\;Hr\;{\leftrightarrow}80^{\circ}C$, 1 Hr, 10 Cycles) and func! tionality was verified by driver testing. It was found all of FPDs were functional after the thermal cycling. Additionally, Au bumps were bonded using ACF's with higher conductive particle densities at bonding temperatures above $163^{\circ}C$. From the experimental results, when the bonding temperature was increased from $163^{\circ}C$ to $199^{\circ}C$, the curing time could be reduced and more conductive particles were retained at the bonding interface between the Au bump and glass substrate.

Keywords

References

  1. T. Chung and G. Haskell, 'Trends in Micro- electronics Packaging and Interconnection, Semiconductor Electronics', p. A1, 1996
  2. S. Y. Kim, T. S. Oh, W. J. Lee, and Y. H. Kim, 'Low temperature and ultra fine pitch joints using non-conductive adhesives for flip chip technology', Proc ICEPT, p. 414, 2006 https://doi.org/10.1109/ICEPT.2006.359782
  3. W. S. Kwon, K. W. Jang, and K. W. Paik, 'High reliable nonconductive adhesives for flip chip interconnections', Proceedings of International Symposium on Electronic Materials and Packaging, p. 34, 2001
  4. L. K. Teha, E. Anto, C. C. Wong, S. G. Mhaisalkar, E. H. Wong, P. S. Teo, and Z. Chen, 'Develpment and reliability of non- conductive adhesive flip chip packages', Thin Solid Films, p. 446, 2004 https://doi.org/10.1016/j.tsf.2004.05.077
  5. J. H. Zhang and Y. C. Chan, 'Research on the contact resistance, reliability and degradation mechanisms of ACF interconnection for flip chip on flex applications', Journal of Electronic Materials, Vol. 32, No. 42, p. 228, 2003 https://doi.org/10.1007/s11664-003-0214-z
  6. K. Matsuda and I. Watanabe, 'Interconnection Technologies of Anisotropic Conductive Films and Their Application to Flexible Electronics', Proceeding of HDP, 2007
  7. H. Kristiansen and J. Liu, 'Overview of Conductive Adhesive Interconnection Technologies for LCD's', IEEE, p. 208, 1998 https://doi.org/10.1109/PEP.1997.656494
  8. K. N. Chiang, C. W. Chang, and C. T. Lin, 'Process modeling and thermal/mechanical behavior of ACA/ACF type flip-chip packages', Journal of Electronic Packaging, Vol. 123, p. 331, 2001 https://doi.org/10.1115/1.1389847
  9. I. Watanabe, 'Packaging technologies using anisotropic conductive adhesive films in FPDs', IDW''01 proceedings, p. 553, 2001
  10. L. K. Teh, C. C. Wong, S. Mhaisalkar, K. Ong, P. S. Teo, and E. H. Wong, 'Characterization of nonconductive adhesives for flip-chip interconnection', Journal of Electronic Materials, Vol. 33, No. 4, p. 271, 2004 https://doi.org/10.1007/s11664-004-0132-8