DOI QR코드

DOI QR Code

A Color Temperature and Illuminance Controllable LED Lighting System

색온도와 조도 제어가능한 LED 조명 시스템

  • 김훈 (한양대학교 전자전기제어계측공학과) ;
  • 염재경 (한양대학교 대학원 전기전자제어계측공학과) ;
  • 정원섭 (청주대학교 전자정보공학부) ;
  • 김희준 (한양대학교 전자컴퓨터공학부)
  • Published : 2009.12.31

Abstract

This paper presents an LED lighting system with an LED color control algorithm that can independently change its color temperature and illuminance. To show the validity of the proposed algorithm, it is proven that its solution always exists. The proposed algorithm was applied to the control of an LED module that is composed of red, green, blue, and white (RGBW) LEDs. Its color temperature variation ranged from 3,500~7,500[$^{\circ}K$], and its illuminance ranges from 500~1,500[lux]. Within these range, the color temperature and illuminance deviations are as low as $\pm0.8$[%] when the junction temperature of LEDs are maintained at 40[$^{\circ}C$]. In the range of 30~70[$^{\circ}C$], the measured illuminance and color temperature deviations are as low as 2.1[%] and 3.6[%], and the compensated ones are as low as 1[%] and 0.49[%], when the desired illuminance and color temperature are 1,000[lux] and 6,500[$^{\circ}K$], respectively.nyang.ac.kr).

본 논문은 독립적으로 LED의 색온도와 조도를 제어하는 알고리즘과 이를 이용한 LED 조명 시스템을 제안한다. 제안된 알고리즘이 항상 해를 가지는 것을 증명해 제안된 알고리즘이 유효함을 보여주었다. 적색, 녹색, 청색, 백색 (RGBW) LED를 사용한 LED 모듈 제어에 제안된 알고리즘을 적용하였다. 이 모듈의 색온도는 3,500~7,500[$^{\circ}K$], 조도는 500~1,500[lux] 범위에서 변화했다. LED의 접합온도가 40[$^{\circ}C$]로 유지될 때, 이 범위 내에서 색온도와 조도의 편차는 0.8[%] 이하였다. 30~70[$^{\circ}C$]의 범위에서는 목표 조도와 색온도가 각각 1,000[lux]와 6,500[$^{\circ}K$] 일 때 조도와 색온도의 편차가 2.1[%]와 3.1[%] 이하이고, 온도 보상된 경우에는 편차가 1[%]와 0.49[%] 이하였다.

Keywords

References

  1. S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, 'Red, green, and blue LED based white light generation: Issues and control', Proc. IEEE Industry Application Conf., Vol. 1, pp. 327-333, Oct. 13-18, 2002
  2. E. F. Schubert, Light-Emitting Diodes, Cambridge University Press, 2006
  3. X. Qu, S.-C. Wong, and C. K. Tse, 'Color control system for RGB LED light sources using junction temperature measurement', Proc. IEEE Industrial Electronics Society, Nov. 5-8, 2007, pp. 1361-1368
  4. P. Narra, and D. S. Zinger, 'An effective LED dimming approach', Proc. IEEE IAS2004, Vol. 3, pp. 1671-1676, Oct. 3-7, 2004
  5. X. Xu, and X. Wu, 'High dimming ratio LED driver with fast transient boost converter', Proc. IEEE Power Electronics Specialists conf., pp. 4192-4195, Jun. 15-19, 2008
  6. L. Svilainis, 'LED PWM dimming linearity investigation', Displays, Vol. 29, No. 3, pp. 243-249, Jul. 2008 https://doi.org/10.1016/j.displa.2007.08.006
  7. K. Lim, J.-C. Lee, G. Panotopoulos, and R. Helbing, 'Illumination and color management in solid state lighting', Proc. IEEE Industry Applications Conf., pp. 2616-2620, Oct. 8-12, 2006
  8. P. Deurenberg, C. Hoelen, J. V. Meurs, and J. Ansems, 'Achieving color point stability in RGB multi-chip LED modules using various color control loops', Proc International Conference on Solid State Lighting, pp. 63-74, Aug. 1, 2005
  9. L. E. Gallagher, 'Current regulator with AC and DC feedback', U.S. Patent 3,350,628, 1967
  10. R. Munzert, and P. T. Krein, 'Issues in boundary control', Proc. Power Electronics Specialists Conf., Vol. 1, pp. 810-816, Jun 1996
  11. National Semiconductor, Co., 'O.5A constant current buck regulator for driving high power LEDs', LM3402/LM3402HV datasheet, Dec. 2008
  12. Kim et al., 'Color temperature conversion system and method using the same', U.S. Patent 7,024,034, 2006
  13. G. Strang, Linear Algebra and Its Applications, MIT Press, 2006
  14. E. Kreyszing, Advanced Engineering Mathematics, John Wiley & Sons, 1999
  15. Philips Lumileds Lighting, 'Power light source Luxeon K2', Luxeon K2 technical datasheet DS51, Jun. 2008
  16. G. Wyszecki, and W. S. Stiles, Color Science: concepts and methods, quantitative data and formulae, 2nd Ed., John Wily & Sons, 1982

Cited by

  1. Digital Light Color Control System of LED Lamp using Inverse Tri-Stimulus Algorithm vol.25, pp.1, 2011, https://doi.org/10.5207/JIEIE.2011.25.1.001
  2. A Development of a Portable Color Scanner Using Photo Sensors for Full-Color LED Illumination Control vol.25, pp.11, 2011, https://doi.org/10.5207/JIEIE.2011.25.11.014
  3. Analysis on the Measured Electric Power Consumption of Dimmable LED Lamps for a Specific Illuminance and Color Temperature vol.25, pp.2, 2011, https://doi.org/10.5207/JIEIE.2011.25.2.024
  4. Design of RBFNN-based Emotional Lighting System Using RGBW LED vol.62, pp.5, 2013, https://doi.org/10.5370/KIEE.2013.62.5.696