Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Al/Al2O3 Multilayer Coatings on NdFeB Permanent Magnet and their Corrosion Characteristics

NdFeB 영구자석에의 Al/Al2O3 다층막 코팅 및 부식 특성

  • Jeong, J.I. (Facility & Automation Research Division, Research Institute of Industrial Science & Technology) ;
  • Yang, J.H. (Facility & Automation Research Division, Research Institute of Industrial Science & Technology)
  • 정재인 (포항산업과학연구원 설비자동화연구본부) ;
  • 양지훈 (포항산업과학연구원 설비자동화연구본부)
  • Published : 2009.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Various types of multilayer coatings including Al/$Al_2O_3$ structure have been prepared on Nd-Fe-B permanent magnet to modify the morphology of the coating and to enhance the corrosion resistance of the magnet. Magnetron sputtering has been employed to make the multilayer coatings. $Al_2O_3$sputtering conditions were optimized in reactive sputtering by varying the deposition parameters. The formation of $Al_2O_3$ film was confirmed from the binding energy shift measured by electron spectroscopy for chemical analysis. 3 types of coating structures were designed and prepared by magnetron sputtering. The coating structures consist of (1) single Al coating, (2) modified coatings having oxide or plasma treated layer in the middle of coating structure, and (3) Al/$Al_2O_3$ multilayer coatings. Surface and cross-sectional morphologies showed that Al/$Al_2O_3$ multilayer grew as a layered structure, and that very compact Zone 3 like structure were formed. X-ray diffraction peak showed that the crystal orientations of multilayer coatings were similar to that of the bulk powder pattern. Hardness increased drastically when the Al thickness was around 1im in the Al/$Al_2O_3$ multilayer. From the salt spray test and pressure cooker test, it has been shown that the multilayer coatings showed good corrosion resistance compared to Al single or modified layer coatings.

Keywords

References

  1. M. Sagawa, S. Fujimura, N. Togawa, M. Yamamoto, Y. Matsuura, J. Appl. Phys., 55 (1984) 2083 https://doi.org/10.1063/1.333572
  2. K. H. J. Buschow, Mater. Sci. Rep. 1 (1986) 1 https://doi.org/10.1016/0920-2307(86)90003-4
  3. J. Jacobson, A. Kim, J. Appl. Phys., 61 (1987) 3763 https://doi.org/10.1063/1.338635
  4. T. S. Chin, R. T. Chang, T. W. Tsai, and M. P. Hung, IEEE Trans. Mag., MAG-24 (1988) 1927
  5. N. C. Ku, C-D. Qin, C. C. Yu, D. H. L. Ng, IEEE Trans. Mag., 32 (1988) 4407
  6. D. S. Edgley, J. M. Le Breton, D. Lemarchand, I. R. Harris, J. Teillet, J. Magn. Magn. Mater., 128 (1993) L1 https://doi.org/10.1016/0304-8853(93)90846-T
  7. D. F. Cygan, M. J. McNallan, J. Magn. Magn. Mater., 139 (1995) 131 https://doi.org/10.1016/0304-8853(94)00454-4
  8. S. Hirosawa, S. Mino, H. Tomizawa, J. Appl. Phys. 69 (1991) 5844 https://doi.org/10.1063/1.347845
  9. K. Tokuhara, S. Hirosawa, J. Appl. Phys., 69 (1991) 5521 https://doi.org/10.1063/1.347987
  10. M. Sagawa, P. Tenaud, F. Vial, K. Hiraga, IEEE Trans. Magn., 26 (1990) 1957 https://doi.org/10.1109/20.104581
  11. E. Rozendall, IEEE Trans. Magn., 26 (1990) 2631 https://doi.org/10.1109/20.104821
  12. C.-D. Qin, A. S. K. Li, D. H. L. Ng, J. Appl. Phys., 79(8) (1996) 4854 https://doi.org/10.1063/1.361632
  13. L. Song, Y. Wang, W. Lin, Q. Liu, Surf. Coat. Technol., 202 (2008) 5146 https://doi.org/10.1016/j.surfcoat.2008.05.025
  14. S. M. Tamborim Takeuchi, D. S. Azambuja, I. Costa, Surf. Coat. Technol., 201 (2006) 3670 https://doi.org/10.1016/j.surfcoat.2006.08.140
  15. T. Minowa, H. Yoshikawa, M. Hoshima, IEEE Trans. Mag., 25 (1989) 3776 https://doi.org/10.1109/20.42430
  16. C. J. William, K. S. V. L. Narashiman, J. Appl.Phys., 61 (1987) 15
  17. F. Kikui, M. Ikegami, K. Yosimura, 國際公開番號 WO98/09300 (1998)
  18. K. Yosimura, T. Nishiuchi, F. Kikui, 國際公開番號 WO99/54890 (1999)
  19. D. Pramanik, A. N. Saxena, Solid State Technol., Part I. 26(1) (1983) 127
  20. M. Neirynck, W. Samaey, L. Van Poucke, J. Vac. Sci. Technol., 11(4) (1974) 647 https://doi.org/10.1116/1.1312728
  21. S. Schiller, H. Forster, G. Hotzsch, G. Jasch, in Proc. of the Conf. on Electron Beam Melting and Refining, Part 2, edited by R. Bakish (Bakish Materials Corp., Englewood, 1989), p.155
  22. N. A. G. Ahmed, Ion Plating Technology (John Wiley & Sons Ltd., 1987), Chap. 3 and 7, and references therein
  23. H. K. Pulker, Coatings on Glass (Elsevier Science Publishers B. V., Amsterdam, The Netherlands, 1984), Chap. 9 and references therein
  24. 김찬욱, 조기현, 석한길, 한국표면공학회지, 40(5) (2007) 214 https://doi.org/10.5695/JKISE.2007.40.5.214
  25. 박상은, 박세훈, Lue jie, 송풍근, 한국표면공학회지, 41(4) (2008) 142 https://doi.org/10.5695/JKISE.2008.41.4.142

Cited by

  1. Effect of the Coating Structure on the Corrosion Resistance of Al-Mg Coated Steel vol.49, pp.5, 2016, https://doi.org/10.5695/JKISE.2016.49.5.454
  2. Characteristics of Al Films Prepared by Oblique Angle Deposition vol.45, pp.3, 2012, https://doi.org/10.5695/JKISE.2012.45.3.111
  3. Effect of Heat Treatment on the Corrosion Resistance of the Al-Mg Coated Steel Sheet vol.47, pp.4, 2014, https://doi.org/10.5695/JKISE.2014.47.4.186