Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Contribution Analysis Using Shape Simplification Method for Casting Structure Shrinkage

주조 구조물 수축공의 형상단순화 기법을 통한 정적하중에 대한 영향도 분석

  • 곽시영 (한국생산기술연구원 사이버설계센터) ;
  • 임채호 (한국생산기술연구원 사이버설계센터) ;
  • 백재욱 (한국델파이주식회사)
  • Published : 2009.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Most structure engineers give the casting components over-estimated factor of safety without any reasonable foundation due to the worries about the unavoidable defects such as shrinkages and porosity in castings; the engineers have little knowledge on the relation between the defect and structural behavior. And the workers in casting field also do not know how to control the defects by manufacturing; they do not know to where the defects move or until how size they reduce the defects. In this study, shrinkage defect was scanned by industrial computerized tomography instrument (CT), and subsequently was modeled to a spheroid primitive for structural analysis. Using these simplified models of shrinkage, we observed the effects of the defect on the results of the structural analysis. A commercial structural analysis code was used to do the analysis works. Considering the conclusions, it is possible to manage the shrinkages effectively in casting process and to design the products with more reliable

Keywords

References

  1. Gooider, J. N., 1933, 'Concentration of Stress Around Spherical and Cylindrical Inclusions and Flaws,' Trans ASME Applied Mechanics Section, Vol. 55, A-39
  2. Sadowsky, M. A. and Sternberg, E., 1947, 'Stress Concentration Around an Ellipsoidal Cavity in an Infinite Body Under Arbitrary Plane Stress Perpendicular to the Axis of Revolution of the Cavity,' Journal of Applied Mechanics, Vol. 14, pp.191~210
  3. Sadowsky, M. A. and Sternberg, E., 1949, 'Stress Concentration Around a Triaxial Ellipsoidal Cavity,' Journal of Applied Mechanics, Vol. 16, pp.149~157
  4. Sunmitomo, T., Caceres, C. H. and Veidt, M., 2002, 'The Elastic Modulus of Cast Mg-Al-Zn Alloys,' Journal of light metals, pp.49~56
  5. Hardin, R. A., Huff, R. K. and Bechermann, C., 2006, 'Integrated Design of Steel Casting for Service Performance,' Proceeding Of the 11th Int. Conf. On Modeling of Casting, Welding and Advanced Solidification Processes-XI, pp. 653~660
  6. Kwak, S. Y., Cheng, J., Kim, J. T. and Choi, J. K., 2008, Structural Analysis Considering Shrinkage Defect of Casting Part,' International Journal of Cast Metals Research, Vol. 21, No.1~3, pp. 419~423 https://doi.org/10.1179/136404608X362179
  7. Song, I. H., Kim, K. D. and Chung, S. C., 2008, 'Internet-Based Dimensional Verification System for Reverse Engineering Processes,' Journal of Mechanical Science and Technology, Vol.22, pp. 1259~1268 https://doi.org/10.1007/s12206-008-0408-7
  8. ImageWareTM NX User Guide, Imageware Products, July, 2003, 'Basic Procedures/Processing point, Creat new curves& surfaces.'
  9. Khachiyan, L. G., 'Rounding of Polytopes in the Real Number Model of Computation,' Mathematics of Operations Research, Vol. 21, pp. 307~320 https://doi.org/10.1287/moor.21.2.307
  10. Kumar, P. and Yildirim, E. A., 2005, 'Minimum Volume Enclosing Ellipsoids and Core Sets, Journal of Optimization Theory and Applications, Vol. 126, No. 1, pp. 1~21 https://doi.org/10.1007/s10957-005-2653-6

Cited by

  1. A Study on the Development of Marine Turbocharger Nozzle Ring using Investment Casting vol.31, pp.8, 2014, https://doi.org/10.7736/KSPE.2014.31.8.671
  2. Study on Effects of Foam-Filter for Reduction of Air-Trapping in Large-Size Sand Gravity Casting vol.33, pp.6, 2016, https://doi.org/10.7736/KSPE.2016.33.6.469
  3. Shape-Simplification Analysis Model for Fatigue Life Prediction of Casting Products Considering Internal Defects vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1243