Korean Journal of Human Ecology (한국생활과학회지)

Korean Association of Human Ecology (한국생활과학회)
권호 표지
DOI QR코드

DOI QR Code

A study of the variations by motion of the Lower body Using 3D Body Surface Scan Data of a man in his early twenties

3차원 스캐너를 이용한 20대 남성의 하반신 신축량 분석

  • Sohn, Boo-Hyun (Dept. of Clothing and Textiles, Chungnam National University) ;
  • Hong, Kyung-Hi (Dept. of Clothing and Textiles, Chungnam National University)
  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to research on the rate of expansion or contraction according to movement of the lower body of the man their twenties using Rapid Form software. And aim of this study is to get information of ease allowance in developing slacks pattern using 3D body surface scan data through comparison with existing slacks patterns. Considering on the contraction and expansion according to movement, it need to set the more ease allowance in hip circumference than waist circumference, and the more ease allowance in back hip width than front hip width in slacks. In crotch length, the length of front crotch is revealed contraction but the length of back crotch is revealed expansion. It is desirable lowering front waist line and raising back waist line to possess ease allowance in back crotch area. The length of side seam is revealed a little expansion but the length of inseam is showed a great expansion. To develop slacks pattern of scientific approach using 3D body surface scan data, it need to analysis the rate of expansion and contraction of the lower body based on the movement, shear deformation, slip in fabrics and skin, or in fabrics and fabrics, and slip down from waist line.

Keywords

References

  1. 김민효, 남윤자(2001). 인체측정용 3차원 스캐너 제작. 대한인간공학회지, 20, 77-88.
  2. 김혜경, 석은영, 서추연(2000). 3차원 Scanner를 이용한 인체계측방법 및 플레어스커트의 착의형태평가방법에 관한 연구. 한국의류학회지, 24(6), 895-906.
  3. 김효숙(1998). 여성바지 패턴에 관한 연구(1). 복식문화연구, 6(3), 418-427.
  4. 나가자와 스스무(1999). 의복과 체형, 예학사, 112-113.
  5. 손부현(2008), 3차원 인체형상 스캔데이터를 이용한 남자바지패턴 설계, 대한가정학회지, 46(9).
  6. 윤미경, 남윤자, 최경미(2007). 3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구. 한국의류학회지, 31(5), 34-46.
  7. 이정임, 주소령, Susan p. Ashdown(2004). 노년 여성 체형의 표준화된 3차원 측정 데이터 추출을 위한 기초 연구. 한국의류학회지, 28(2), 344-353.
  8. 이희란(2005). 3차원 레플리카를 이용한 여성용 밀착 상의의 패턴 전개 방법. 한국의류학회지, 29(7), 1008-1017.
  9. 정연희, 홍경희(2006). 3차원 스캔 데이터를 활용한 밀착 패턴원형 개발. 한국의류학회지, 30(1), 157-166.
  10. 최명해.최영림.남윤자.최경미(2007). 20대 성인 남성 상반신앞판형상의 평면 전개를 위한 표준화 연구. 한국의류산업학회지, 9(4), 418-424.
  11. 최영림.남윤자.최경미(2006). Grid method에 의한 3차원 형상의 평면전개를 위한 optimal matrix 표준화 연구. 한국의류학회지, 30(8), 74-84.
  12. 함옥상(1981). Slacks의 機能性에 關한 人間工學的 硏究. 대한가정학회지, 19(2), 151-163.
  13. 間壁治子(2000). 被服のための人間因子, 244-247.
  14. Ann Haggar(2004). Pattern cutting for lingerie, beachwear and leisurewear, Blackwell publishing. 22-24.
  15. Jeong, Y., Hong, K. and Kim, S.(2006). 3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation, Fibers and Polymers, 7(2), 195-202. https://doi.org/10.1007/BF02908267
  16. Krzywinski, S., Siegmund, J., and Rodel, H.(2005). Virtual product development for close-fitting sportswear, Avantex symposium.

Cited by

  1. 2D Pattern Development of Body Surface from 3D Human Scan Data Using Standing and Cycling Postures vol.21, pp.5, 2012, https://doi.org/10.5934/KJHE.2012.21.5.975
  2. Extracting Method of the Space Shapes between Clothing and the Human Body - Focusing on the Mold Bra for Small-breasted Women - vol.23, pp.4, 2014, https://doi.org/10.5934/kjhe.2014.23.4.653
  3. Development of Ergonomic Pattern for Motorcycle Pants Using 3D Virtual Clothing vol.25, pp.2, 2016, https://doi.org/10.5934/kjhe.2016.25.2.207