Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지

A Study on the Hydrogen Supply for Variation in Output from a Metal Hydride Canister

금속수소화물 금속용기로부터 출력변동에 필요한 수소공급에 관한 연구

  • Jung, Young-Guan (School of Mechanical Engineering, Kumoh National Institute of Tech) ;
  • Kim, Se-Woong (School of Mechanical Engineering, Kumoh National Institute of Tech) ;
  • Kim, Kyung-Hoon (School of Mechanical Engineering, Kumoh National Institute of Tech) ;
  • Choi, Seong-Dae (School of Mechanical Engineering, Kumoh National Institute of Tech) ;
  • Jang, Tae-Ik (School of Mechanical & Automotive Engineering, Kangnung-WOrUu National Univ.) ;
  • Hwang, Chul-Min (Graduate school of Systems and Information Engineering, University of Tsukuba Tennodai)
  • 정영관 (금오공과대학교 기계공학부) ;
  • 김세웅 (금오공과대학교 기계공학부) ;
  • 김경훈 (금오공과대학교 기계공학부) ;
  • 최성대 (금오공과대학교 기계공학부) ;
  • 장태익 (강릉원주대학교 기계자동차 공학부) ;
  • 황철민 (츠쿠바대학원 시스템정보공학연구과)
  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The relation between temperature and hydrogen desorption on variation in output was investigated for the metal hydride canister. For this study, an AB$_5$ type alloy were chosen as a hydrogen storage material in the metal hydride canister. And application to the single proton exchange membrane fuel cell was evaluated. As the results, the hydrogen desorption was linearly increased as the temperature was risen. In addition, metal hydride canister heating was able to correspond the variation of load as power request in the PEMFC system.

Keywords

References

  1. 장태익, 정영관 : '신. 재생에너지공학', (주) 북스힐, 2008
  2. 김종원, 정영관 외 : 수소에너지', 도서출판 아진, 2005
  3. 新エネルギ-. 産業技術合開發機構 : '水素貯藏技術の現狀と課題', 2008
  4. 정영관, 김세웅, 황철민, 장태익 : '팔라듐에 관한 수소저장과 팽창거동에 관한 수치해석', 한국수소 및 신에너지학회 논문집, Vol. 18, No.3, 2007, pp. 256-264
  5. P.RWilson, RC.Bowman Jr. : 'Operation of a PEM fuel cell with LaNi4.8SnO.2 hydride beds', J. Alloys and Compounds, 446, 2007, pp. 676-680 https://doi.org/10.1016/j.jallcom.2007.02.162
  6. Brendan D. M, Andrew M. R : 'A thermally coupled metal hydride hydrogen storage and fuel cell system', J Power sources, 161, 2006, pp. 346-355 https://doi.org/10.1016/j.jpowsour.2006.04.018
  7. Yee-Pien Yang, Ahao-Wei Liu, Fu- Cheng Wang: 'An application of indirect model reference adaptive control to a low-powe proton exchange membrane fuel cell', J. Power Sources, 179, 2008, pp. 618-630 https://doi.org/10.1016/j.jpowsour.2008.01.053
  8. Brendan D, MacDonald : 'A thermally coupled metal hydride hydrogen storage and fuel cell system', J. Power Sources, 161, 2008, pp. 346-355 https://doi.org/10.1016/j.jpowsour.2006.04.018
  9. Yun Chen, Cesar AC.Sequeira : 'Metal hydride beds and hydrogen supply tanks as minitype PEMFC hydrogen sources', int J. Hydrogen Energy, 28, 2003, pp. 329-333 https://doi.org/10.1016/S0360-3199(02)00064-2
  10. 정영관, 김경훈, 김세웅 : '압연가공판재의 수소저장과 팽창거동과의 관계', 한국수소 및 신에너지학회 논문집, Vol. 12, No.2, 2001, pp. 121-128
  11. 정영관, 김경훈, 김세웅 : '팔라듐에서의 변형 및 수소흡수거동에 미치는 형상 및 가공의 영향', 한국수소 및 신에너지학회 논문집 Vol. 12, No.4, 2001, pp. 247-255
  12. S. -R Chung, T. -P. Pemg : 'E ffect of particle size on hydrogenation properties of a gas-atomized AB -type alloy', J. Alloys and Compounds, 353, 2003, pp. 289-294 https://doi.org/10.1016/S0925-8388(02)01295-1
  13. P. Delchev, P. Solsona, B. Drenchev, N. Drenchev, N. Drenchev, T. Spassov, M.D. Bam: 'Direct hydriding of Mg87Al7Ni3Mn3 by reactive mechanical milling in hydrogen atmosphere and influence of particle size on the dehydriding reaction', J. Alloys and Compounds, 388, 2005, pp. 98-103 https://doi.org/10.1016/j.jallcom.2004.07.001
  14. 長谷一矢, 渥美洋一, 井元忠博, 先川光弘, 他 :'溫度差エネルギ一と水素吸藏合金を活用した诲水交換裝置의 開發', 海洋開發論文集, 2004, Vol .20, pp. 359-364