Fire Science and Engineering (한국화재소방학회논문지)

Korean Institute of Fire Science and Engineering (한국화재소방학회)
권호 표지

Comparison of Combustion Properties of the Pinus rigida, Castanea sativa, and Zelkova serrata

리기다 소나무, 밤나무, 느티나무의 연소성질 비교

  • Published : 2009.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper investigated the combustion properties of the Pinus rigida, Castanea sativa, and Zelkova serrata which are grown in Korea using the cone calorimeter. The heat release rate and smoke production for these species were measured. With respect to an increase of retardant properties attributed to char formation, Zelkova serrata showed good properties compared with that of Pinus rigida and Castanea sativa. The Castanea sativa has high $CO_{peak}$ Yield and high $CO/CO_2$ Yield compared with that of Pinus rigida and Zelkova serrata.

본 연구는 콘칼로리미터를 사용하여 한국 리기다 소나무, 밤나무, 느티나무의 연소성질을 조사하였다. 이들 종에 대한 열방출율과 연기 발생량을 측정하였다. 숯생성으로 인한 연소성 억제 증대에 대하여, 느티나무는 리기다 소나무, 밤나무에 비하여 좋은 성질을 보였다. 밤나무는 리기다 소나무, 느티나무에 비하여 높은 CO수율과 높은 $CO/CO_2$ 수율을 나타내었다.

Keywords

References

  1. W.S. Atkins, 'Wood Utilisation Systems-Combustion Strateges', Energy Technolodge Support Unit, Department of Energy. U.K.(1984)
  2. V. Babrauskas, 'Ignition of Wood: A Review of the State of the Art. Interflam 2001', pp.71-88, Interscience Communications Ltd., London(2001)
  3. D. Drysdale, 'An Introduction to Fire Dynamics', John Wily & Sons(1996)
  4. A.D. Chirico, M. Armanini, P. Chini, G. Cioccolo, F. Provasoli and G. Audiso, 'Flame Retardants for Polypropylene Based on Lignin', Polymer Degradation and Stability, Vol.79, pp.139-145(2002) https://doi.org/10.1016/S0141-3910(02)00266-5
  5. F.M. Pearce, Y.P. Khanna and D. Raucher, 'Thermal Analysis in Polymer Flammability', In: Thermal Characterization of Polymeric Materials, Chap. 8, Academic Press, New York(1981)
  6. A.H. Buchnan, 'Structural Design for Fire Safety', pp.35-37, John Wiey & Sons, LTD(2001)
  7. J.B. Carle and J.L. Brown, 'Wood as a Source of Solid Fuel: A Review', ed. G.S. Watt, New Zealand Forest Service, Auckland(1976)
  8. H. Kubler, 'Wood as Building and Hobby Material', pp.139-149J, John Wiley & Sons, Inc., U.S.A. (1980)
  9. J. Tissari, K. Hytonen, J. Lyynranen and J. Jokinienmi, 'A Nodel Field Measurement Method for Determining Fire Particle and Gas Emissions from Residential Wood Combustion', Atmospheric Environment, Vol.41, No.37, pp.8330-8344(2007) https://doi.org/10.1016/j.atmosenv.2007.06.018
  10. M. Glasius, M. Ketzel, P. Wahlin, B. Jensen, J. Monster, R. Berkowicz and F. Palmgren, 'Impact of Wood Combustion on Particle Levels in a Residential Area in Denmark', Atmospheric Environment, Vol.40, No.37, pp.7115-7124(2006). doi: 10.1016/j.atmosenv.2006.06.047
  11. Y.J. Chung, 'Flame Retardancy of Veneers Treated by Ammonium Salts', Journal of the Korean Industrial & Engineering Chemistry, Vol.18, No.3, pp.251-254(2007)
  12. W.K. Smith and J.B. King, 'Surface Temperratures of Materials During Radiant Heating to Ignition', J. Fire Flammability, p.1(1970)
  13. R. Bilbao, 'Experimental and Theretical Study of the Ignition and Smoldering of Wood Including Convective Effects', Combust Flame, pp.126(2001)
  14. N. Boonmee and J.G. Quintiere, 'Glowing the Ignition and Burning Rate of Wood', In: Twentyninth Symposium (international) on combustion, pp.289-296, The Combustion Institute(2002)
  15. N. Boonmee and J.G. Quintiere, 'Glowing Ignition of Wood: The Onset of Surface Combustion', In:Thirtieth Symposium (international) on combustion, The Combustion Institute(2004)
  16. ISO 3130, 'Wood-Determination of Moisture Content for Physical and Mechanical Tests' (1975)
  17. ISO 5660-1, 'Reaction-to-Fire Tests - Heat Release, Smoke Production and Mass Loss Rate - Part 1:Heat Release Rate (Cone Calorimeter Method)' (2002)
  18. EN 13823, 'Reaction to Fire Tests for Building Products. Building Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item'(2002)
  19. V. Babrauskas, 'Development of Cone Calorimeter-A Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption', Fire and Materials, Vol.8, No.2, pp.81-95(1984). doi: 10.1002/fam.810080206
  20. V. Babrauskas and S.J. Grayson, 'Heat release in Fires', P.644, E & FN Spon(Chapman and Hall), London, UK(1992)
  21. 박형주, 김홍, '일정한 복사열원에 노출된 목재의 탄화속도에 관한 연구', 한국화재소방학회논문지, Vol.18, No.4, pp.86-92(2004)
  22. G. Ondrej, H. Elena and O. Anton, 'Cone Calorimeter Studies of Wood Species', International Symposium on Fire Science and Technology, pp.77-84, 한국화재소방학회: 학술대회논문집(1997)
  23. R.T. Hull and T. Paul Keith, 'Bench-scale Assessment of Combustion Toxicity-a Critical Analysis of Current Protocols', Fire Safety Journal, Vol.42, No.5, pp.340-365(2007). doi: 10.1016/j.firesaf.2006.12.006
  24. M. Staudt, N. Bertin, U. Hansen, G. Seufert, P. Cieeioli, P. Foster, B. Frenzel, J.-L. Fugit and L. Torres, 'The BEMA-project: Seasonal and Diurnal Patterns of Monoterpene Emissions from Pinus Pinea (L.)', Atrmospheric Environment, Vol.31, pp.145-156(1997) https://doi.org/10.1016/S1352-2310(97)00081-2
  25. Y. Yokochi and Y. Ambe, 'Factors Affecting the Emission of Monoterpenes from Red Pine (Pinus densiflora), Plant Physicol, Vol.75, pp.1,009-1,012 https://doi.org/10.1104/pp.75.4.1009
  26. J.-C. Kim, J.-H. Hong, C.-H. Gang, Y. Sunwoo, K.-J. Kim and J.-H. Lim, 'Comparison of Monoterpene Emission Rate from Conifers', Journal of Korean Society for Atmospheric Environment, Vol.20, No.2, pp.175-183