DOI QR코드

DOI QR Code

Development of an In-Pipe Inspection and Cleaning Robot

배관 검사 및 청소 로봇의 개발

  • 최형식 (한국해양대학교 기계정보 공학부) ;
  • 나원현 (한국해양대학교 대학원 기계공학과) ;
  • 강동완 (한국해양대학교 대학원 기계공학과) ;
  • 강형석 (한국해양대학교 대학원 기계공학과) ;
  • 전지광 (한국해양대학교 대학원 기계공학과) ;
  • 김현식 (동명대학교 로봇시스템공학과)
  • Published : 2009.07.31

Abstract

In this paper, a robot was developed for in-pipe cleaning and inspecting a large number of circular in-pipes of sea plants, ships, and buildings. A pressure generation mechanism was devised to inspect circular in-pipes with different diameters and to move up and down slant or perpendicular slopes in-pipes. For inspection of the dark inner side of the pipe, a light system using LED which dissipats small electricity was developed. Also, a design method was analyzed to decide the capacity of driving motor for the robot when the mass and maximum velocity of the robot are identified. The robot developed based on the design specification, was tested to verify the performance of the pressure generation mechanism. In addition, a control system was developed for the test.

Keywords

References

  1. W. Neubauer, "A Spider-like robot that climbs vertically in ducts or pipes", Int. Proc. of IEEE/RSJ International Conf. on Intelligent Robots and Systems, pp. 1178-1185, 1994
  2. F. Pfeiffer, T. Robmann, and K. Loffer, "Control of a tube crawling robot", Int. Conf. control, oscillations, and chaos, Vol. 3, pp. 586-591, 2000.
  3. S. Horose, H. Ohno, T. Mitsue, and K. Suyama, "Design of in-pipe inspection vehicles for $\Phi$25, $\Phi$50, $\Phi$150 pipes", Proc. of IEEE Int. Conf. of Robotics and Automation, pp. 2309-2314, 1999
  4. K. U. Scholl, V. Kepplin, K. Berns, and A. Dillmann, "An articulated service robot autonomous sewer inspection tasks", Proc. of IEEE/RSJ Int. Conf. of Intelligent Robots and Systems, Vol. 2, pp. 1075-1080, 1999
  5. H. T. Roman, B. A. Pellegrino, G. R. Sigrist, "Pipe crawling inspection robots: an overview", IEEE Trans. of Energy Conversion, pp. 576-583, 1993
  6. T. Fukuda, H. Hosokai, M. Uemura, "Rubber gas actuation driven by hydrogen storage alloy for in-pipe inspection mobile robot with flexible structure", Proc. of IEEE Int. Conf. of Robotics and Automation, pp. 1847-1852, 1989
  7. I. Hayashi, and N. Iwatsuki, "Micro moving robotics", Proc. of IEEE/RSJ Int. Conf. of Intelligent Robots and Systems, Vol. 2, pp. 41-50, 1998
  8. S. G. Roh, S. M. Ryew, J. H. Yang, and H. R. Choi, "Active steerable inpipe inspection robots for underground urban gas pipeline", Proc. of IEEE Int. Conf. of Robotics and Automation, pp. 761-766, 2001

Cited by

  1. Design of the out-pipe type pipe climbing robot vol.14, pp.9, 2013, https://doi.org/10.1007/s12541-013-0210-z
  2. Hybrid position/force control of 6-dof hydraulic parallel manipulator using force and vision vol.43, pp.3, 2016, https://doi.org/10.1108/IR-10-2015-0192
  3. 보행 재활 로봇 개발을 위한 1자유도 무릎 관절 설계 vol.8, pp.1, 2013, https://doi.org/10.7746/jkros.2013.8.1.008
  4. 상수도 배관의 갱생 공정을 위한 배관 건설 로봇 개발 vol.16, pp.3, 2009, https://doi.org/10.7746/jkros.2021.16.3.223