한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제23권4호
  • /
  • Pages.58-63
  • /
  • 2009
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지

304 스테인리스강의 용접부위의 부식특성에 관한 전기화학적 평가

Electrochemical Evaluation of Corrosion Property of Welding Zone of 304 Stainless Steel

  • 문경만 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 김윤해 (한국해양대학교 공과대학 조선기자재 공학부) ;
  • 김종도 (한국해양대학교 해사대학 기관시스탬공학부) ;
  • 이명훈 (한국해양대학교 해사대학 기관시스탬공학부) ;
  • 김진경 (한국해양수산연수원 교육연구처)
  • Moon, Kyung-Man (Dept. of Marine Equipment Engineering, Korea Maritime Univ) ;
  • Kim, Yun-Hae (Dept. of Marine Equipment Engineering, Korea Maritime Univ) ;
  • Kim, Jong-Do (Dept. of Marine System Engineering, Korea Maritime Univ) ;
  • Lee, Myung-Hoon (Dept. of Marine System Engineering, Korea Maritime Univ) ;
  • Kim, Jin-Gyeong (Education and Research Division, Korea Institute of Maritime and Fisheries Technology)
  • 발행 : 2009.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Two kinds of welding methods are used for austenitic 304 stainless steel: laser welding and TIG welding. The difference in the corrosion characteristics of the welded zone between these two welding methods was investigated using electrochemical methods, such as corrosion potential measurements, polarization curves, cyclic voltammograms, etc. The Vickers hardnesses of all the welded zones (WM: Weld Metal, HAZ: Heat Affected Zone, BM: Base Metal) showed relatively higher values in the case of laser welding than for TIG welding. Furthermore, the corrosion current densities of all the welding zones showed lower values compared to TIG welding. In particular, the corrosion current density of the HAZ with TIG welding had the highest value of all the welding zones, which suggests that chromium depletion due to the formation of chromium carbide appears in the HAZ, which is in the range of the sensitization temperature. Thus, it can easily be corroded with a more active anode. Consequently, we found that the corrosion resistance of all of the welding zones for austenitic 304 stainless steel could apparently be improved by using Laser welding.

키워드

참고문헌

  1. 김민남, 김복인, 한정동 (2000). "습식수중 용접봉의 기계적 성질에 관한 연구", 한국해양공학회지, 제14권, 제4호, pp 56-61
  2. 김복인, 노창석, 정교헌, 김민남 (2001). "피복성분에 의한 수중 용접봉의 아크 안정성 개선에 관한 연구", 한국해양공학회지, 제15권, 제4호, pp 75-79
  3. 김진경, 강명신, 김영식 (2006). "선박용 디젤기관의 주철 부품 보수 용접 특성에 관한 연구", 한국해양공학회지, 제20권, 제2호, pp 41-45
  4. 신민교 (1987). 기계공작법, 아성출판사, pp 242-245
  5. 안석환, 정정환, 남기우 (2005). "용접 열사이클 재현에 의한 SS400강 및 STS304강의 특성평가", 한국해양공학회지, 제19권, 제4호, pp 64-71
  6. 오종인, 김영표, 박호경, 방한서 (2007). "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 제21권, 제1호, pp 64-68
  7. 전대희 (1985). 부식과 방식의 관리, 일중사, pp 294-298
  8. Bilmes, P.D. Liorente, C.L. Saire Huaman, Gassa L.M. andGervasi, C.A. (2006). "Microstructure and Pitting Corrosionof 13CrNiMo Weld Metal", Corrosion Science, Vol 48, pp 3261-3270 https://doi.org/10.1016/j.corsci.2005.10.009
  9. Devine, T.M. (1990). "The Mechanism of Sensitization of Austenitic Stainless Steel", Corrosion Science, Vol 30, No 23, pp 135 https://doi.org/10.1016/0010-938X(90)90068-G
  10. Hiroshi, I. (1978). "Study of Weld Decay in SUS 304", Journal of Japanese Welding Society, Vol 47, No 3, pp 153 https://doi.org/10.2207/qjjws1943.47.153
  11. Jang, S.K. and Jeon, J.I. (2006). "Wedability of Al 7075 Alloy According to Different Tools and Welding Conditions by F.S.W.", Journal of the Korean Society of Marine Engineering, Vol 30, No 1, pp 30-41
  12. Kim, J.D., Kil, B.L. and Lee, C.J. (2006a). "The Weldability of Haminated Stator Core for Motor by Pulsed Nd: YAG Laser[I]", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 629-635
  13. Kim, J.D., Yoo, S.J. and Kim, J.S. (2006b). "Optimization of Pulsed Nd: YAG Laser Welding Conditions for Sealing of Lithium-ion Battery", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 623-628
  14. Lee, Y.H., Kim, Y.H. and Kim, H. (2003). "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment", Corrosion Science and Technology, Vol 2, No 5, pp 219-224
  15. Lo, I.H., Lee, M.C., Lim, K.Y., Ho, W., Yang, G.C.Y. and Tsai, W.T. (2002). "Effect of Heat Treatment on the Pitting Corrosion Behavior of 347SS Weld Overlay", Corrosion Science and Technology, Vol 31, No 5, pp 361-367
  16. Moon, K.M., Lee, M.H., Kim, K.J., Kim, J.G. and Kim, S.J. (2003). "A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE36 Steel", Corrosion Science and Technology, Vol 2, No 6, pp 283-288
  17. Nubuo, F. (1964). 'Effect of Thermal Cycles on Corrosion Resistance in a Type 304 Stainless Steel', Journal of Japanese Welding Society, Vol 33, No 1, pp 55 https://doi.org/10.2207/qjjws1943.33.55
  18. Raja, V.S., Vershney, S.K., Raman, R. and Kulkarni, S.D. (1998). "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad", Corrosion Science, Vol 40, No 10, pp 1609-1625 https://doi.org/10.1016/S0010-938X(97)00174-1
  19. Tsay, L.W., Lin, W.L., Chenct, S.W. and Leu, G.S. (1997). "Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments", Corrosion Science, Vol 39, No 7, pp 1165-1176 https://doi.org/10.1016/S0010-938X(97)00015-2
  20. Yoshihiko, M. (1972). "Corrosion of Austenitic Stainless Steel Welds", Journal of Japanese Welding Society, Vol 41, No 2, pp 154