A New Method for the Analysis of Measured Displacements during Tunnelling using Control Charts

관리도를 이용한 터널 시공현장 계측변위 분석 기법 개발

  • Yim, Sung-Bin (Department of Earth & Environmental Sciences, Chungbuk National University) ;
  • Seo, Yong-Seok (Department of Earth & Environmental Sciences, Chungbuk National University)
  • 임성빈 (충북대학교 지구환경과학과) ;
  • 서용석 (충북대학교 지구환경과학과)
  • Published : 2009.09.30

Abstract

Tunnel measurements provide crucial information on the ground stability during the excavation, visualizing the ground behavioral characteristics with quantitative dada. Generally, the frequency of the measurements is greater during the early stage of the tunnelling process and reduced with time. However, there are no quantitative criteria established for either the activities, such as the time, location and frequency of the measurement or the management guidance, especially for the site of subtle and unexpected displacement during the excavation. It is, however, still challenging to assess behavioral characteristics of subtle and unexpected displacement after stabilization. In this study, we propose a new method to assess stability and to analysis the behavioral characteristics of subtle and unexpected displacement after stabilization using statistic control charts of displacements. We also present a test result on the applicability of control chart and CUSUM control chart to measured displacements.

터널 굴착 중 수행되는 계측은 구성 지반의 거동을 가시화하여 안정성을 평가할 수 있는 중요한 정보를 제공한다. 일반적으로 계측은 터널 굴착면 형성 초기에 집중적으로 수행되며, 시간이 경과할수록 계측횟수를 줄여 나간다. 하지만 이러한 계측 기준 및 관리 지침은 획일적이며 뚜렷한 정량적 기준이 부족한 실정이다. 본 연구에서는 굴착 초기 발생하는 변위의 안정화 시점의 정량적 판단과 안정화 이후의 미세한 변위 변동 특성 분석 및 이상거동 평가를 위해 통계 관리도 기법을 적용하였다. 계측변위에 대한 이동범위(MR) 관리도 및 누적합(CUSUM) 관리도를 작성하여 변위 평가 가능성을 검토하였다.

Keywords

References

  1. 터널의 이론과 실무, 2004, 한국터널공학회
  2. 임성빈, 김성권, 서용석, 박시현, 2007, 관리도 기법을 이용한 터널 변위수렴 특성에 관한 연구, 대한지질공학회지, 17, pp. 197-204
  3. 권오일, 백용, 서용석, 2008, 통계관리도 이론을 적용한 사면 계측데이터 분석 시스템 개발, 대한지질공학회학술발표회, pp. 137-143
  4. Brook, D. and D. A. Evans, 1972, An Approach to the Probability Distribution of CUSUM Run Length, Biometrika, Vol. 59, pp. 639-549 https://doi.org/10.1093/biomet/59.3.639
  5. Costa, A. F. B., 1997, X Chart with Variable Sample Size and Sampling Interval, Journal of Quality Technology, Vol. 29, pp. 197-204 https://doi.org/10.1080/00224065.1997.11979750
  6. Lucas, J. M. and M. S. Saccucci, 1990, Exponentially Weighted Moving Average Control Schemes : Properties and Enhancements, Technometrics, Vol. 32, pp. 1-12 https://doi.org/10.2307/1269835
  7. Page, E. S., 1954, Continuous Inspection Schemes, Biometrika, Vol. 41, pp. 100-114 https://doi.org/10.1093/biomet/41.1-2.100
  8. Prabhu, S. S., D. C. Montgomery, and G. C. Runger, 1994, A Combined Adaptive Sample Size and Sampling Interval X Control Sheme, Journal of Quality Technology, Vol. 26, pp. 164-176 https://doi.org/10.1080/00224065.1994.11979524