Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

An Effective Design Method of Stamping Process by Feasible Formability Diagram

가용 성형한계영역을 이용한 스템핑 공정의 효율적 설계방법

  • Cha, Seung-Hoon (Precision Manufacturing Systems Division, Pusan National Univ.) ;
  • Lee, Chan-Joo (Precision Manufacturing Systems Division, Pusan National Univ.) ;
  • Lee, Sang-Kon (PNU-IFAM Joint Research Center, Pusan National Univ.) ;
  • Kim, Bong-Hwan (Department of Automotive Engineering, Jinju National Univ.) ;
  • Ko, Dae-Cheol (Industrial Liaison Innovation Cluster, Pusan National Univ.) ;
  • Kim, Byung-Min (School of Mechanical Engineering, Pusan National Univ.)
  • 차승훈 (부산대학교 대학원 정밀가공시스템) ;
  • 이찬주 (부산대학교 대학원 정밀가공시스템) ;
  • 이상곤 (부산대학교 PNU-IFAM 국제공동연구소) ;
  • 김봉환 (진주산업대학교 자동차공학과) ;
  • 고대철 (부산대학교 ILIC) ;
  • 김병민 (부산대학교 기계공학부)
  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In metal forming technologies, the stamping process is one of the significant manufacturing processes to produce sheet metal components. It is important to design stamping process which can produce sound products without defect such as fracture and wrinkle. The objective of this study is to propose the feasible formability diagram which denotes the safe region without fracture and wrinkle for effective design of stamping process. To determine the feasible formability diagram, FE-analyses were firstly performed for the combinations of process parameters and then the characteristic values for fracture and wrinkle were estimated from the results of FE-analyses based on forming limit diagram. The characteristic values were extended through training of the artificial neural network. The feasible formability diagram was finally determined for various combinations of process parameters. The stamping process of turret suspension to support suspension module was taken as an example to verify the effectiveness of feasible formability diagram. The results of FE-analyses for process conditions within fracture and wrinkle as well as safe regions were in good agreement with experimental ones.

Keywords

References

  1. Yang, K. E., Jang, D. K. and Lee, H. G., "Recent press forming technology and research trends," Journal of Korean Society of Machine Tool Engineers, Vol. 11, No. 2, pp. 30-37, 2002
  2. Ko, H. H., Jung, D. W., Ahn, H. G., Lee, C. H., Ahn, B. I. and Moon, W. S., " A study of tool planning for forming analysis in REF SILL OTR-R/L autobody panel stamping process," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 3, pp. 118-124, 2006
  3. Son, K. C. and Shim, H. B., "Optimal blank shape design using the initial velocity of boundary nodes," Journal of Materials Processing Technology, Vol. 134, No. 1, pp. 92-98, 2003 https://doi.org/10.1016/S0924-0136(02)00927-5
  4. Bae, G. H., Song, J. H., Huh, H., Kim, S. H. and Park, S. H., "Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process," Journal of Materials Processing Technology, Vol. 187-188, pp. 123-127, 2007 https://doi.org/10.1016/j.jmatprotec.2006.11.059
  5. Oguz, K. and Bulent, E., "Automated desing methodology for automobile side panel die using an effective optimization approach," Materials and Design, Vol. 28, No. 10, pp. 2665-2672, 2007 https://doi.org/10.1016/j.matdes.2006.10.011
  6. Wei, D., Cui, Z. and Chen, J., "Optimization and tolerance prediction of sheet metal forming process using response surface model," Computational Materials Science, Vol. 42, No. 2, pp. 228-233, 2008 https://doi.org/10.1016/j.commatsci.2007.07.014
  7. Liu, W. and Yang, Y., "Multi-objective optimization of sheet metal forming process using pareto-based genetic algorithm," Journal of Materials Processing Technology, Vol. 208, No. 1-3, pp. 499-506, 2008 https://doi.org/10.1016/j.jmatprotec.2008.01.014
  8. Engineering Technology Associates Inc., "Dynaform-PC User's manual Version1.0," Engineering Technology Associates Inc., 2001
  9. Kim, J. Y., Kim, N. S. and Huh, M. S., "Optimum blank design of an automobile sub-frame," Journal of Materials Processing Technology, Vol. 101, No. 1, pp. 31-43, 2000 https://doi.org/10.1016/S0924-0136(99)00436-7
  10. Hillmann, M. and Kubli, W., "Optimization of sheet metal forming processes using simulation programs," Proceedings of the Numisheet 99, Vol. 1, pp. 287-292, 1999
  11. Eshel, G., Barash, M. and Johnson, W., "Automatic generation of process outlines of forming and machining processes," ONR Contract No. 83 K0385 Final Report, Vol. 5, 1986
  12. Nine, H. D., "Draw bead forces in sheet metal forming," Proc. of Mechanics of Sheet Metal Forming, Material Behavior and Deformation Analysis, pp. 179-211, 1978
  13. ARAMIS & ARGUS commercial software. GOM, http://www.gom.com/