Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

3D FE Model with FEA Factors and Plastic Shots for Residual Stress Under Oblique Shot Peening

경사충돌 피닝잔류응력에 미치는 해석인자의 영향 및 소성숏이 포함된 3차원 유한요소모델

  • Published : 2010.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we propose a 3D finite element (FE) model for the residual stress under oblique shot peening. Using the FE model for an oblique impact, we examine the effects of factors on the residual stress such as the Rayleigh damping in the material, dynamic friction, and the rate dependency of the material and systematically integrate the effects. The plastic deformation of the shot is also emphasized. Then, the FE model is used to study oblique multi-impacts. The results obtained using the FE model are compared with experimental x-ray diffraction (XRD) results; in contrast to the rigid and elastic shots, plastic shots are found to produce residual stresses similar to that shown in the XRD results. Thus, the 3D FE models with integrated factors and plastically deformable shots are validated. The proposed model will serve as a basis for the 3D FE model for multi-impacts with different impact angles to simulate the actual phenomenon of shot peening.

본 연구에서는 경사충돌시 피닝잔류응력 평가를 위해 3 차원 유한요소해석모델을 제안한다. 단일경사 충돌 해석모델을 이용해 Rayleigh 재료감쇠, 동적마찰 그리고 재료의 변형률 속도에 대한 영향을 알아 보고 이를 통합하여 피닝잔류응력 유일해를 얻는다. 숏볼은 변형을 고려한 소성숏을 포함한 해석 모델이며, 다중숏 경사충돌해석으로 확장한다. 다중경사충돌 해석모델은 단일경사충돌 연구를 통해 결정된 통합된 피닝인자들을 반영했고, 숏볼은 소성숏을 사용하였다. XRD 실험해와 비교시, 강체 및 탄성숏 해석모델에서 얻어진 해석해에 비해 소성숏 모델의 해석해가 실험해에 매우 근접하다. 이로부터 다양한 투사각을 갖는 3 차원 유한요소해석모델의 유효성을 확인하였다. 궁극적으로 제안된 해석모델은 실제 피닝현상을 충분히 반영하기 위한 다중숏 경사충돌해석연구의 초석이 될 것이다.

Keywords

References

  1. Schiffner, K. and Helling, C., 1999, "Simulation of Residual Stresses by Shot Peening," Computers & Structures, Vol. 72, pp. 329 - 340. https://doi.org/10.1016/S0045-7949(99)00012-7
  2. Han, K., Peric, D., Owen, D. R. J. and Yu, J., 2000, "A Combined Finite/Discrete Element Simulation of Shot Peening Processes Part II: 3D Interaction Laws," Engineering Computations, Vol. 17, No. 6, pp. 680 - 702. https://doi.org/10.1108/02644400010340615
  3. Meguid, S. A., Shagal, G. and Stranart, J. C., 2002, "3D FE Analysis of Peening of Strain-Rate Sensitive Materials Using Multiple Impingement Model," International Journal of Impact Engineering, Vol. 27, pp. 119 - 134. https://doi.org/10.1016/S0734-743X(01)00043-4
  4. Majzoobi, G. H., Azizi, R. and Alavi N. A., 2005, "A Three-Dimensional Simulation of Shot Peening Process Using Multiple Shot Impacts," Journal of Materials Processing Technology, Vol. 164 – 165, pp. 1226 - 1234. https://doi.org/10.1016/j.jmatprotec.2005.02.139
  5. Baek, S., Yang, W. H., Seok, C. S. and Ryu, M. H., 2003, "Residual Stress Analysis of Inclined Shot Peening Using Finite Element Method," KSME (A) Spring Annual Meeting, pp. 328 - 333.
  6. Miao, H. Y., Larose, S., Perron, C., Levesque, M., 2009, "On the Potential Applications of a 3D Random Finite Element Model for the Simulation of Shot Peening," Advances in Engineering Software, Vol. 40, pp. 1023 - 1038. https://doi.org/10.1016/j.advengsoft.2009.03.013
  7. Hong, T., Ooi, J. Y. and Shaw, B., 2008a, "A Numerical Simulation to Relate the Shot Peening Parameters to the Induced Residual Stresses," Engineering Failure Analysis, Vol. 15, No. 8, pp. 1097 - 1110. https://doi.org/10.1016/j.engfailanal.2007.11.017
  8. Hong, T., Ooi, J. Y. and Shaw, B., 2008b, "A Numerical Study of the Residual Stress Pattern from Single Shot Impacting on a Metallic Component," Advances in Engineering Software, Vol. 39, pp. 743 -756. https://doi.org/10.1016/j.advengsoft.2007.10.002
  9. Kim, T. and Lee, H., 2008, "A 2D FE Model for Unique Solution of Peening Residual Stress in Single Shot Impact," KSME (A), Vol. 32, No. 4, pp. 362 - 370. https://doi.org/10.3795/KSME-A.2008.32.4.362
  10. ABAQUS User’s Manual, 2004, Version 6.5, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
  11. Rotation Table Type Impeller Peening Machine (PMI-0608) User’s Manual, 2004, Saemyung Shot Machinery Co., Inc.
  12. De Silva, C. W., 1999, Vibration, CRC Press, New York, pp. 349 - 398.
  13. Crook, A. J. L. and Owen, D. R. J., 2000, "A Combined Finite/Discrete Element Simulation of Shot Peening Processes, Part I: Studies on 2D Interaction Laws," Engineering Computations, Vol. 17, No. 5, pp. 593 - 619. https://doi.org/10.1108/02644400010339798
  14. Premark, T. and Douglas, A. S., 1995, "Three Dimensional Analysis of The Impact Fracture of 4340 steel," International Journal of Solids and Structures, Vol. 32, No. 17 - 18, pp. 2793 - 2812. https://doi.org/10.1016/0020-7683(94)00295-8
  15. Torres, M. A. S. and Voorwald, H. J. C., 2002, An Evaluation of Shot Peening Residual Stress and Stress Relaxation on the Fatigue Life of AISI 4340 Steel, International Journal of Fatigue, 24, 877 - 886. https://doi.org/10.1016/S0142-1123(01)00205-5
  16. Kim, T., Lee, J. H., Lee, H. and Cheong, S. K., 2009, "An Area-averaged Approach to Peening Residual Stress Under Multi-impacts Using a Three-Dimensional Symmetry-cell Finite Element Model with Plastic Shots," Materials & Design, Vol. 31, pp. 50 - 59. https://doi.org/10.1016/j.matdes.2009.07.032