Journal of the Korean Society for Railway (한국철도학회논문집)

The Korean Society for Railway (한국철도학회)
권호 표지

A Study on the Wearing Phenomenon Analysis of Pantograph Slider for the Subway Cars

전동차 판토그라프 주습판 마모 현상분석에 관한 연구

  • 김영규 (서울산업대학교 철도전문대학원) ;
  • 권석진 (한국철도기술연구원 차륜궤도연구실) ;
  • 원시태 (서울산업대학교 제품설계금형공학과) ;
  • 이희성 (서울산업대학교 철도전문대학원)
  • Received : 2009.12.16
  • Accepted : 2010.07.30
  • Published : 2010.08.26
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is about the copper slider with high electric conductivity and resistance arc. A new copper slider which has enhanced resistance against frictional wear was developed. By alteration of its material components and manufacturing process, its material property has been enhanced. To verify its enhanced wear-resisting capacity, a laboratory test and a field test were carried out. As the laboratory test, a dynamo test was performed and its test result showed that the developed new copper slider had superior wear-resisting capacity to the currently used copper slider. The new one showed double durability of the current one and normal wearing characteristics. A filed test was performed on the Metro subway lines at service by Seoul Metro. The field test showed similar results to those from the laboratory test, which the d eveloped new copper slider has double superior durability and sound wearing patterns. Authors strongly believe that the replacement of the copper slider currently in use by the developed new one will contribute to the economic and efficient operation of the subway line system

본 논문은 우수한 전기전도도 및 내 아크성을 가진 동계주습판에 관한 것이다. 내마모성이 향상된 동계 주습판을 개발하여 실내실험과 현장실험을 수행하였다. 주습판 재료의 성분 조성을 변경하여 재질과 제조공정을 개선하였으며, 실내실험과 현장실험을 통하여 기존 주습판과 내마모성을 비교하였다. 실내 실험은 다이나모 실험을 통하여 이루어졌으며, 실험결과 개선품의 내마모성은 기존 제품에 비해 2배 정도 향상되었으며, 균질한 마모패턴을 보여주었다. 또한 공용중인 도시철도 구간에서 현장 시험을 수행하였으며, 현장실험결과도 실내 실험과 같이 개발된 개선품의 내구성이 기존품에 비해 2배 정도 향상되었으며, 이상마모가 발생하지 않는다는 것을 확인하였다. 내구성이 향상된 본 개발품의 현장 적용 시, 경제적이고 효과적인 도시철도 노선의 유지보수가 가능할 것으로 판단된다

Keywords

References

  1. J.D. Chung, S.Y. Han, W.K. Kim, S.G. Lee, Y.K. Hong, R.H. Jung (2002) An evaluation on a wearing test for EMU's panto shoes, 2002 Spring Conf. of Korean Society for Railway, pp. 417-422.
  2. H.W. Oh (2002) A Study on Measurement and Analysis for Pantograph Slider Wearing of Electric Multiple Unit, Thesis for Master's Degree, Seoul National University of Technology, Seoul, Korea.
  3. Y.G. Kim (2007) A Study on the Wearing Phenomenon Analysis of Pantograph Slider for the Subway Cars, Thesis for Master's Degree, Seoul National University of Technology, Seoul, Korea.
  4. Seunglim Carbon Metal (2004) Research Report for Copper Slide, Seunglim Carbon Metal, Ansan, Korea.
  5. Y.G. Kim, Y.J. Yang (2007) A study on the Weaning Phenomenon of Pantograph Slider for the SEOUL METRO Line 4 Rail Vehicles, 2007 Autumn Conference of Korean Society for Railway, pp. 50-55.
  6. Y.G. Kim, S.C. Park, S.T. Won, K.J. Choi (2007) A Metallurgical Study on the Abrasion of Slider, 2007 Autumn Conference of Korean Society for Railway, pp. 56-61.
  7. Y.G. Kim, Y.J. Yang, S.T. Won, K.J. Choi (2007) A Study on the Wearing Phenomenon Analysis of Phantograph Slider for the Subway Cars, 2007 Spring Conference of Korean Society for Railway, pp. 47-52.
  8. S.H. Kim (1997) Introduction To The Railway System, Ja Jak Academy, Seoul, Korea.
  9. Seoul Metropolitan Subway Corporation (1994) Rail-Vehicle Maintenance Manual for Line 4, Seoul Metropolitan Subway Corporation, Seoul, Korea.
  10. Y.G. Kim, J.Y. Mok, H.S. Lee (2005) An Experimental Study on the Correlation between Span Types and the Contact Force of the Pantograph for High-speed Train, Journal of the Korean Society for Railway, 8(5), pp. 398-404