Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Nonlinear finite element analysis of effective CFRP bonding length and strain distribution along concrete-CFRP interface

  • Received : 2009.10.01
  • Accepted : 2010.04.16
  • Published : 2010.10.25
⟨ Previous Next ⟩

Abstract

CFRP has been widely used for strengthening reinforced concrete members in last decade. The strain transfer mechanism from concrete face to CFRP is a key factor for rigidity, ductility, energy dissipation and failure modes of concrete members. For these reasons, determination of the effective CFRP bonding length is the most crucial step to achieve effective and economical strengthening. In this paper, generalizations are made on effective bonding length by increasing the amount of test data. For this purpose, ANSYS software is employed, and an experimentally verified nonlinear finite element model is prepared. Special contact elements are utilized along the concrete-CFRP strip interface for investigating stress distribution, load-displacement behavior, and effective bonding length. Then results are compared with the experimental results. The finite element model found consistent results with the experimental findings.

Keywords

References

  1. Anil, O. and Belgin, C. (2008), "Review of bond-strength models and application on CFRP- to-concrete bonded joints across crack", Sci. Eng. Compos. Mater., 15(2), 141-158. https://doi.org/10.1515/SECM.2008.15.2.141
  2. ANSYS (2005), ANSYS user's manual revision 10.0, ANSYS, Inc., Cannonsburg, Pennsylvania.
  3. Camata, G., Spacone, E. and Zarnic, R. (2007), "Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates", Compos. Part B - Eng., 38, 277-288. https://doi.org/10.1016/j.compositesb.2005.12.003
  4. Ersoy, U. (2000), Reinforced Concrete, METU, Ankara.
  5. Garden, H.N., Quantrill, R.J., Hollaway, L.C., Thorne, A.M. and Parke, G.A.R. (2007), "An experimental study of the anchorage length carbon fibre composite plates used to strengthen Reinforced concrete beams", Compos. Struct., 21, 709-726.
  6. Guatam, B.P. and Matsumoto, T. (2009), "Shear deformation and interface behavior of concrete-filled CFRP box beams", Compos. Struct., 89, 20-27. https://doi.org/10.1016/j.compstruct.2008.06.020
  7. Lu, X.Z., Teng, J.G., Ye, L.P. and Jiang, J.J. (2005), "Bond-slip models for FRP sheets/plates bonded to concrete", Eng. Struct., 27, 920-937. https://doi.org/10.1016/j.engstruct.2005.01.014
  8. Lu, X.Z., Jiang, J.J., Teng, J.G. and Ye, L.P. (2006), "Finite element simulation of debonding in FRP-to-concrete bonded joints", Constr. Build. Mater., 20, 412-424. https://doi.org/10.1016/j.conbuildmat.2005.01.033
  9. Moaveni, S. (1999), Finite element analysis: theory and application with ANSYS, Prentice-Hall, New Jersey.
  10. Pham, H.B., Al-Mahaidi, R. and Saouma,V. (2006), "Modeling of CFRP-concrete bond using smeared and discrete cracks", Compos. Struct., 75, 145-150. https://doi.org/10.1016/j.compstruct.2006.04.039
  11. Pham, H.B. and Al-Mahaidi, R. (2007), "Modeling of CFRP concrete shear-lap test" J. Constr. Build. Mater., 21, 727-735. https://doi.org/10.1016/j.conbuildmat.2006.06.012
  12. Schilde, K. and Seim, W. (2007), "Experimental and numerical investigations of bond between CFRP and concrete", Constr. Build. Mater., 21, 709-726. https://doi.org/10.1016/j.conbuildmat.2006.06.006
  13. Sharma, S.K., Mohamed Ali, M.S., Goldar, D. and Sikdar, P.K. (2006), "Plate-concrete interfacial bond strength of FRP and metallic plated concrete specimens", Compos. Part B - Eng., 37, 54-63. https://doi.org/10.1016/j.compositesb.2005.05.011
  14. Smith, S.T. and Teng, J.G. (2001), "Interfacial stresses in plated beams", Eng. Struct., 23, 857-871. https://doi.org/10.1016/S0141-0296(00)00090-0
  15. Täljsten, B. (1997), "Defining anchor lengths of steel and CFRP plates bonded to concrete", Int. J. Adhes. Adhes., 17, 319-327. https://doi.org/10.1016/S0143-7496(97)00018-3
  16. Teng, J.G. and Yao, J. (2007), "Plate end debonding in FRP-plated RC beams-II: strength model", Eng. Struct., 29, 2472-2486. https://doi.org/10.1016/j.engstruct.2006.11.023
  17. Teng, J.G., Zhang, J.W. and Smith, S.T. (2002), "Interfacial stresses in reinforced concrete beams bonded with a soffit plate: a finite element study", Constr. Build. Mater., 16, 1-14. https://doi.org/10.1016/S0950-0618(01)00029-0
  18. Yang, D.S., Park, S.K. and Neale, K.W. (2009), "Flexural behavior of reinforced concrete beams strengthened with prestressed carbon composites", Compos. Struct., 88, 497-508. https://doi.org/10.1016/j.compstruct.2008.05.016
  19. Yang, Q.S., Peng, X.R. and Kwan, A.K.H. (2004), "Finite element analysis of interfacial stresses in FRP-RC hybrid beams", Mech. Res. Commun., 31, 331-340. https://doi.org/10.1016/j.mechrescom.2003.11.011
  20. Yang, Z.J., Chen, J.F. and Proverbs, D. (2003), "Finite element modeling of concrete cover separation failure in FRP plated RC beams", Constr. Build. Mater., 17, 3-13. https://doi.org/10.1016/S0950-0618(02)00090-9
  21. Yao, J., Teng, J.G. and Chen, J.F.M. (2005), "Experimental study on FRP-to-concrete bonded joints", Compos. Part B - Eng., 36, 99-113. https://doi.org/10.1016/j.compositesb.2004.06.001
  22. Yao, J. and Teng, J.G. (2007), "Plate end debonding in FRP-plated RC beams –I : Experiments", Eng. Struct., 29, 2457-2471. https://doi.org/10.1016/j.engstruct.2006.11.022
  23. Yuan, H., Teng, J.G., Seracino, R., Wu, Z.S. and Yao, J. (2005), "Full-range behavior of FRP-to-concrete bonded joints", Eng. Struct., 26, 553-565.
  24. William, K.J. and Warnke, E.P. (1974), "Constitutive model for the triaxial behavior of concrete", IABSE Report No.19, 19, 1-30.

Cited by

  1. Nonlinear finite element analysis of loading transferred from column to socket base vol.11, pp.5, 2013, https://doi.org/10.12989/cac.2013.11.5.475
  2. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2010, https://doi.org/10.12989/sem.2011.38.4.479
  3. A stress-function variational approach toward CFRP -concrete interfacial stresses in bonded joints vol.9, pp.1, 2010, https://doi.org/10.12989/acc.2020.9.1.043