Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Structural Strength Analysis of Automotive Suspension

자동차 현가장치의 구조 강도 해석

  • 조재웅 (공주대학교 기계자동차공학부) ;
  • 권오범 (계명대학교 일반대학원 기계공학과) ;
  • 한문식 (계명대학교 기계자동차공학부)
  • Published : 2010.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the analysis of state when load applies to McPherson strut assembly. Strut assembly except knuckle-arm are created with 3 dimensional modeling program. Stress and structural strength on this model are analyzed by analysis program as load applies on the lower part of assembly modeling. When McPherson suspension is applied with 3000N at Z direction, maximum stress at spring becomes 433MPa and the cycle of minimum life is 4321. The designed modeling suspension at this study has no possibility with resonance.

Keywords

References

  1. Park, H., Hahn, C. S., Kim, B. W., and Kim, D. G., 2003, "Sweet Area Determination by Performance Sensitivity Analysis for an Automotive Vehicle Suspension," Transactions of the KSMTE, Vol. 12, No. 1, pp. 92-100.
  2. Park, J. H., Lee, J. S., and Baek, W. K., 2006, "Optimal Design of A MacPherson Strut Suspension with A Carrier," 2006 Autumn Conference Proceeding of the KSAE, Vol. II, pp. 861-865.
  3. Lee, T. K., and Kim, B. S., 2004, "Vibration Characteristics of Automobile Suspension System considering Tire Design Parameters," Proceedings of the KSME 2004 Fall Annual Conference, pp. 805-810.
  4. Lee, S. B., Jang, Y. J., Yim, H. J., and Nah, D. B., 2009, "Optimum Design of SUV Suspension Parameters Considering Rollover Stability," Journal of KSMTE, Vol. 18 No. 4, pp. 410-416.
  5. Shin, Y. J., Park, J. H., Hur, H. M., and You, W. H., 2008, "Running Stability Analysis caused by Parameters of Primary Suspension in Railway Vehicles," 2008 Autumn Conference Proceeding of the KSPE, pp. 689-690.
  6. Park, K. D., Kim, H. J., Kim, Y. D., and Jung, J. W., 2003, "A Study of Methods of Fatigue Strength Improvement for the Suspension Material," 2003 Autumn Conference Proceeding of the KSPSE, pp. 44-49.
  7. Ji, Y. C, Jeon, N. I., Seo, W. J., Doo, M. S., and Chung, I. S, 2004, "The Structural Analysis on the Damper Spring Module of McPherson Suspension," 2004 Autumn Conference Proceeding of the KSAE, Vol. II, pp. 691-696.
  8. Nah, D. B. and Lee, S. B., 2004, "Chassis Control System Technology of Intelligent Vehicle," Journal of KSMTE, Vol. 13, No. 2, pp. 49-56.