References
- Jang, C. M., and Kim, K. Y., 2005, “Optimization of a Stator Blade Using Response Surface Method in a Single- Stage Transonic Axial Compressor,” Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, Vol. 219, No. 8, pp. 595-603. https://doi.org/10.1243/095765005X31298
- Nakamura, K., and Kurosawa, 2009, “Design Optimization of a High Specific Speed Francis Turbine Using Multi-Objective Genetic Algorithm,” International Journal of Fluid Machinery and Systems, Vol. 2, No. 2, pp. 102-109. https://doi.org/10.5293/IJFMS.2009.2.2.102
- Bonaiuti, D., and Pediroda, V., 2001, “Aerodynamic Optimization of an Industrial Centrifugal Compressor Impeller Using Genetic Algorithms,” Proceedings of Eurogen 2001.
- Bonaiuti, D., Arnone, A., Ermini, M., 2006, “Analysis and Optimization of Transonic Centrifugal Compressor Impellers Using the Design of Experiments Technique,” Journal of Turbomachinery, Vol. 128, October, pp. 786-797. https://doi.org/10.1115/1.1579507
- Wang, X. F., Xi, G., and Wang, Z. H., 2006. “Aerodynamic Optimization Design of Centrifugal Compressor’s Impeller with Kriging Model,” Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, Vol. 220, No. 6, pp. 589-597. https://doi.org/10.1243/09576509JPE201
- Bartold, A., and Joos, F., 2008, “Optimization of a Centrifugal Impeller using Evolutionary Algorithms,” ASME Turbo Expo 2008, Berlin, Germany, GT2008-50805. https://doi.org/10.1115/GT2008-50805
- Benini, E., 2004, “Three-Dimensional Multi-Objective Design Optimization of a Transonic Compressor Rotor,” Journal of Propulsion and Power, Vol. 20, No. 3, pp. 559-565. https://doi.org/10.2514/1.2703
- Samad, A., and Kim, K. Y., 2009, “Application of Surrogate Modeling to Design of A Compressor Blade to Optimize Stacking and Thickness,” International Journal of Fluid Machinery and Systems, Vol. 2, No. 1, pp. 1-12. https://doi.org/10.5293/IJFMS.2009.2.1.001
- Merchant, A., Kerrebrock, J. L., Adamczyk, J. J., and Braunscheidel, E., 2004, “Experimental Investigation of a High Pressure Ratio Aspirated Fan Stage,” ASME Turbo Expo 2004, Vienna, Austria, GT2004-53679. https://doi.org/10.1115/GT2004-53679
- Wu, H., Li, Q., and Zhou, S., 2007, “Optimization of Highly Loaded Fan Rotor Based on Through Flow Model,” ASME Turbo Expo 2007, Montreal, Canade, GT2007-27603. https://doi.org/10.1115/GT2007-27603
- Merchant, A. A., Drela, M., Kerrebrock, J. L., Adamczyk, J. J., and Celestina, M., 2000, “Aerodynamic Design and Analysis of a High Pressure Ratio Aspirated Compressor Stage,” ASME Turbo Expo 2000, Munich, Germany, 2000-GT-619.
- Cosentino, R., Alsalihi, Z., and Van den Braembussche, R., A., “Expert System for Radial Impeller Optimization,” Proc., Fourth European Conference on Turbomachinery, Paper No. ATI-CST-039/01.
- Huppertz, A., Flassig, P. M., Flassig, R. J., and Swoboda, M., 2007, “Knowledge-Based 2D Blade Design Using Multi-Objective Aerodynamic Optimization and a Neural Network,” ASME Turbo Expo 2007, Montreal, Canada, GT2007-28204. https://doi.org/10.1115/GT2007-28204
- Rai, M. M. and Madyavan, N. K., 2000, “Aerodynamic Design Using Neural Networks,” AIAA Journal, Vol. 38, No. 1, pp. 173-182. https://doi.org/10.2514/2.938
- Lee, K. S., Kim, K. Y., Samad, A., and Jung, S. H., 2008, “Optimization of an Axial Flow Fan Blade for Efficiency Enhancement Using Neural Network Techniques,” The 2nd International Symposium on Jet Propulsion and Power Engineering,” Guilin, China, 2008-ISJPPE-4011.
- Samad, A., Kim, K. Y., Goel, T., Haftka, R. T., and Shyy, W., 2008, “Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization,” Journal of Propulsion and Power, Vol. 24, No. 2, pp. 302-310. https://doi.org/10.2514/1.28999
- ANSYS CFX-11.0 Solver Theory, 2006, Ansys Inc.
- Menter, F. R., Kuntz, M., and Langtry, R., 2003, “Ten Years of Industrial Experience with the SST Turbulence Model,” Turbulence, Heat and Mass Transfer, Begell House Inc.
- Orr., M. J. L., 1996, “Introduction to radial basis neural network,” Center for cognitive science, Edinburgh University, Scotland, UK. http://anc.ed.ac.uk/RBNN/.
- MATLAB(R), The Language of Technical Computing, Release 14, 2004, The Math Works Inc.
- JMP(R) 5.1, 2004, SAS Institute, Inc.
Cited by
- Effect of Cone Angle of a Seven-Hole Probe on the Accuracy Flow Measurement vol.14, pp.5, 2011, https://doi.org/10.5293/kfma..2011.14.5.005
- Design Optimization of a Printed Circuit Heat Exchanger Using Surrogate Models vol.14, pp.5, 2011, https://doi.org/10.5293/kfma..2011.14.5.055
- High-Efficiency Design of a Ventilation Axial-Flow Fan by Using Weighted Average Surrogate Models vol.35, pp.8, 2011, https://doi.org/10.3795/KSME-B.2011.35.8.763
- Optimization of an inclined elliptic impinging jet with cross flow for enhancing heat transfer vol.47, pp.6, 2011, https://doi.org/10.1007/s00231-011-0763-2
- Multi-objective optimization of a rotating cooling channel with staggered pin-fins for heat transfer augmentation vol.68, pp.7, 2011, https://doi.org/10.1002/fld.2590
- Multi-objective optimization of a guide vane in the turning region of a rotating U-duct to enhance heat transfer performance vol.48, pp.11, 2012, https://doi.org/10.1007/s00231-012-1041-7
- Optimization of Duct System with a Cross Flow Fan to Improve the Performance of Ventilation vol.16, pp.1, 2013, https://doi.org/10.5293/kfma.2013.16.1.040
- Aerodynamic Design Optimization of a Micro Radial Compressor of a Turbocharger vol.11, pp.7, 2018, https://doi.org/10.3390/en11071827
- Design Optimization of the Centrifugal Pumps via Low Fidelity Models vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/3987594
- Optimized Blade Design of Counter-Rotating-Type Pump-Turbine Unit Operating in Pump and Turbine Modes vol.2018, pp.1542-3034, 2018, https://doi.org/10.1155/2018/6069780
- Optimization of a Centrifugal Compressor Using the Design of Experiment Technique vol.9, pp.2, 2019, https://doi.org/10.3390/app9020291