DOI QR코드

DOI QR Code

A Study on Structural Analysis for the Bellows of Automotive Exhaust System

승용차 배기계 벨로우즈의 구조해석에 관한 연구

  • Kim, Jin-Bong (Aeronautical & Mechanical Eng., Hanseo University)
  • 김진봉 (한서대학교 항공기계학과)
  • Received : 2009.10.06
  • Accepted : 2010.04.09
  • Published : 2010.04.30

Abstract

As the space for installation of automotive exhaust system is limited, the space should be optimized with relation to the endurance and shape of the system. Geometric nonlinear analysis was used and deflection of bellows was assumed 6mm. Obtained results are as follows; (1) The Von-Mises stress of bellows is increased with increase of thickness or radius of bellows linearly. (2) As the principal stress varies according to the radius of convolution, it is necessary to decide the optimal radius of convolution.

자동차 배기계는 제한된 설치 공간으로 인하여 내구성과 연계된 형상을 최적화하여야 한다. 본 연구에서는 자동차 배기계를 구성하고 있는 Flexible Tube(Bellows)의 형상에 따른 응력 변화를 해석하였다. 아울러 Bellows의 변위량이 크게 발생하는 것을 고려하여 기하학적 비선형 해석을 실시하였으며 Bellows의 변형량은 끝단에서 6mm의 변위가 발생하도록 하였으며 얻어진 결과는 다음과 같다. (1) Bellows의 두께가 증가하거나 Bellows Tube의 반경이 증가하면 Von-Mises 응력은 비례적으로 증가한다. (2) Bellows의 주름의 반경이 증가함에 따라 주 응력이 감소하다가 증가함으로 Bellows 설계 시 최소 응력 산출을 위한 주름 반경의 선정이 요구된다.

Keywords

References

  1. Korane KJ, "Cutting emmisions with metal bellows", Machine Design 24, 1995.
  2. Althini K, Folesson P. AP Automotive Systems, Inc.,Torsas, Sweden, 1999.
  3. Snedden NW, "The strength and stability of corrugated bellows expansion joints", PhD thesis, D43087/82, Churchill College, University of Cambridge, Cambridge, UK, 1981.
  4. Anderson WF, "Analysis of stress in bellows - Part 1 design criteria and test results", Atomic International, NAA-SR-4527, United States Atomic Energy Commission, 1964.
  5. Anderson WF, "Analysis of stress in bellows - Part 2 mathematica"1, Atomic International, NAA-SR-4527, United States Atomic Energy Commission, 1965.
  6. ASME, ASME Boiler and Pressure Vessel Code-Section VIII, Division 1, Appendix BB, New York, 1986.
  7. EJMA, "Standards of the Expansion Joint Manufacturers Association", seventh edition, 1998.
  8. Hanna JW. "A comparison of the ASME appendix BB to the EJMA standards". Metallic bellows and expansion joints-1989, The 1989 ASME Pressure Vessels and Piping Conference, JSME Co-sponsorship, Honolulu, Hawaii, 23-27. July pp. 79-85. 1989.
  9. Ting-XinL, Bing-Liang G, Tian-Xiang K, Qing-Chen W. 'Stresses and fatigue failure of U-shaped bellows", Metallic bellows and expansion joints-1989, The 1989 ASME Pressure Vessels and Piping Conference. JSME Co-sponsorship, Honolulu, Hawaii, 23-27 July pp.13-9, 1989.
  10. Osweiller F. "Design of an expansion joint by a finite element program - comparison with the EJMA standards", Metallic bellows and expansion joints-1989, The 1989 ASME Pressure Vessels and Piping Conference, JSME Co-sponsorship, Honolulu, Hawaii, 23-27 July 1989. p. 87-94.