DOI QR코드

DOI QR Code

A Study on Combination Technology of a Transformer and a Superconducting Fault Current Limiter

변압기와 초전도한류기의 결합기술 연구

  • Received : 2010.05.22
  • Accepted : 2010.06.03
  • Published : 2010.09.01

Abstract

We tried to combine a transformer with a superconducting element and investigated the current limiting characteristics. When a superconducting element was connected to third winding of the transformer, the fault current was limited to about 90 % effectively. The fault current and consumption power were able to be controlled by the turn's ratio of secondary and third windings. It gives flexibility of the rating of a transformer in the power grid. As a result, power burden of a superconducting element was reduced by the decrease of turn's ratio in third winding of a transformer. It was because the voltage behavior of a superconducting element was dependent on turn's ratio of a transformer while the current characteristic was independent.

Keywords

References

  1. X. Yuan, K. Tekletsadik, L. Kovalsky, J. Bock, F. Breuer, and S. Elschner, "Proof-of-Concept Prototype Test Results of a Superconducting Fault Current Limiter for Transmission-Level Applications," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 1982-1985, June 2005. https://doi.org/10.1109/TASC.2005.849432
  2. D. C. Chung, H. S. Choi, N. Y. Lee, G. Y. Nam, Y. S. Cho, T. H. Sung, Y. H. Han, B. S. Kim, and S. H. Lim, "Optimum design of matrix fault current limiters using the series resistance connected with shunt coil," Physica C, vol. 463-465, pp.1193-1197, 2007. https://doi.org/10.1016/j.physc.2007.03.457
  3. S. H. Lim, "Fault current limiting characteristics of separated and integrated three-phase flux-lock type SFCLs," Journal of Electrical Engineering & Technology, vol. 2, no. 3, pp. 289-293, 2007. https://doi.org/10.5370/JEET.2007.2.3.289
  4. O. B. Hyun, J. W. Sim, H. R. Kim, K. B. Park, S. W. Yim, and I. S. Oh, "Reliability enhancement of the fast switch in a hybrid superconducting fault current limiter by using power electronic switches", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 1843-1846, June 2009. https://doi.org/10.1109/TASC.2009.2018369
  5. G. H. Lee, K. B. Park, J. W. Sim, Y. G. Kim, I. S. Oh, O. B. Hyun, and B. W. Lee, "Hybrid superconducting fault current limiter of the first half cycle non-limiting type", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 1888-1891, June 2009. https://doi.org/10.1109/TASC.2009.2017873
  6. O. B. Hyun, K. B. Park, J. W. Sim, H. R. Kim, S. W. Yim, and I. S Oh, "Introduction of a hybrid SFCL in KEPCO grid and local points at Issue", IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 1946-1949, June 2009. https://doi.org/10.1109/TASC.2009.2018256
  7. 이주형, 최효상, "3개의 초전도 소자를 갖는 자속구속형 SFCL과 변압기형 SFCL의 특성 비교", 대한전기학회 논문지, Vol. 58P, No. 1, MAR., pp. 79-83, 2009.
  8. 정병익, 최효상, "2${\times}$3구조의 매트릭스형 초전도한류기 의 트리거코일 및 션트저항에 따른 특성", 대한전기학회 논문지, Vol. 58P, No. 1, MAR., pp. 85-89, 2009.