DOI QR코드

DOI QR Code

Measurement Error Analysis of Ground Resistance Using the Fall-of-Potential Method According to the Locations of Auxiliary Probes

전위강하법에 의한 접지저항 측정시 보조전극의 위치변화에 따른 오차 분석

  • Received : 2010.01.04
  • Accepted : 2010.04.06
  • Published : 2010.06.01

Abstract

This paper presents numerical analysis of measurement errors of ground electrode using the fall-of-potential method. In order to analyze ground resistance error according to the positions of auxiliary probes, firstly, national and international standards were researched. Secondly, numerical ground resistance error of hemispheric electrode was analyzed according to the locations of auxiliary probes and the angle between probes. Then, error-reduced positions of auxiliary probes were shown according to the distance to auxiliary current probe versus ground electrode size. Finally, error compensation method was presented. The results presented in this paper provide useful information regarding ground resistance error of alternative positions of auxiliary probes in case that the auxiliary probes could not be located at the proper position in such cases as there are buildings, roadblock or underground metallic pipe at that position.

Keywords

References

  1. 高橋健彦, "접지기술입문", 동일출판사, pp.34 1995.
  2. 이복희, 이승칠, "접지의 핵심 기초 기술", 도서출판 의제, pp.4-5, 1999.
  3. 지식경제부 공고 제2009-60호, "전기설비기술기준의 판단기준", 지식경제부, 2009.
  4. 대한전기협회, "전기설비기술기준 해설서", pp.107-110, 2009.
  5. IEC, "IEC 60364-4-41", pp.11-15, 2005.
  6. BSI, "BS 7671:2008", pp.47-52, 2008.
  7. 정보통신단체표준, "TTAS.KO-04.0026/R1", 2007.
  8. Jinxi Ma, "Extended Analysis of Ground Impedance Measurement Using the Fall-of-Potential Method", IEEE Trans. power Delivery, Vol. 17, No. 4, pp.881-885, Oct. 2002. https://doi.org/10.1109/TPWRD.2002.803738
  9. 일본전기협회, "발변전규정(JEAC 5001)", pp.295, 2000.
  10. IEEE, "IEEE Std 81.2-1991", pp.20, 1991.