Journal of Fashion Business (패션비즈니스)

The Korean Society of Fashion Business (한국패션비즈니스학회)
권호 표지

The Analysis on the Clothing Construction Factors and the Sewability of the Mechanical Industry Working Clothes - With Reference to the Seam Strength and Seam Elongation According to the Material and Seam Types -

기계 산업용 작업복 의복구성요인과 봉제성능 분석 - 소재 및 솔기별 봉합강도와 봉합신도 중심으로 -

  • Park, Gin-Ah (Dept. of Clothing and Textiles, Changwon National University)
  • Received : 2009.09.27
  • Accepted : 2009.10.26
  • Published : 2010.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purposes of the research were to find out the clothing construction factors of the mechanical industry working clothes by analyzing the working clothes supplied to 5 subject companies; and to suggest the optimized sewing conditions and the seam strength and elongation experimental data according to the clothing material and seam types implied to the working clothes collected. The fabric types and trimmings used for the mechanical manufacturing working clothes were Polyester/Cotton(65/35%), Polyester/Rayon(65/35%), Cotton(100%); and linings, interlining, various fastenings etc. 2 stitch types, i.e. lock and two-thread chain stitches were applied to the construction of the flat, lap felled, French, superimposed, lapped and bound seams for the seam strength and elongation experiment. The results derived from the experiment were as follows. (1) The seam strength results according to the seam types were high in the order of lap felled>lapped>flat, superimposed and French seams. (2) Considering the features of the seam construction, as the number of fabric layers at the seam line increased the seam strength also increased. (3) Apart from the highest seam strength from the experiment using the net lining with the main fabric, the seam construction consisting of two fabric layers with the interlining showed relatively high seam strength results. (4) The seam elongations according to the stitch types were high in the order of two-thread chain>lock stitches.

Keywords

References

  1. "경남통계, 사업체기초통계", 경남도청, 자료검 색일 2009. 2. 10, 자료출처 http://www.gsnd.net/03_open/04_statistics/statistics031.jsp?mmain=3&sub1=4&sub2=3&sub3=1
  2. 이옥희.홍병숙(1997), "섬유업체 근로여성의 작업복 실태 및 선호연구", 대한가정학회지, 35(4), pp.185-198.
  3. 이경화.김경화(1999), "Clean Room Wear의 착용실태에 관한 연구", 한국복식학회지, 48 Nov., pp.117-132.
  4. 배현숙(2001), "자동차 제조업체 근로자의 작업 복 착의실태 분석", 대한가정학회지, 39(7), pp.115-124.
  5. 김혜령.서미아(2002), "기계공업종사자의 작업 복 착용 실태조사 연구", 복식문화연구, 10(6), pp.718-734.
  6. 김혜령.서미아(2003), "기계공업 종사자의 작업복 만족도 연구", 복식문화연구, 11(6), pp.867-878.
  7. 박순자.신정숙.정명희(2003), "생활폐기물 소각장 작업자의 작업환경과 작업복 현황 분석", 한국의류학회지, 27(8), pp.992-1003.
  8. 최정화.김소영.이주영(2004), "철도 차량 정비 작업자의 부직포 보호 작업복 착용 실태에 관한 연구", 한국의류학회지, 28(8), pp.1165-1174.
  9. 김성숙.김희은(2006), "건설현장 근로자의 작업복 실태조사", 한국의류산업학회지, 8(2), pp. 203-208.
  10. 이윤정.정찬주.정재은(2002), "반도체 산업환경에서의 방진복 디자인의 개발", 한국의류학회지, 26(2), pp.337-348.
  11. 최혜선.손부현(2001), "지뢰제거복의 착용실태에 관한 기초조사연구", 한국의류학회지, 25(2), pp.259-267.
  12. 임현주 外(2008), "항공정비복의 인간공학적 디자인 개발", 한국의류학회지, 32(5), pp.681-691.
  13. "OSHA(Occupational Safety & Health Admini stration). Personal Protective Equipment Regulations". 자료검색일 2008. 2. 20, 자료출처 http://www.www.osha.gov/
  14. "NIOSH(National Institute for Occupational Safety and Health). Personal Protective Equipment Regulations". 자료검색일 2008. 2. 20, 자료출처 http://www.cdc.gov/niosh/
  15. 박혜원.박진아(2008), "공단근로자의 작업복 디자인 실태 및 선호도 연구", 패션비즈니스, 12(2), pp.134-152.
  16. 박진아.배현숙(2008), "창원국가산업공단 근로자들의 작업복 착용실태에 관한 연구 -작업 분야별 작업복 기능성 및 동작요인을 중심으로 -", 한국의류학회지, 32(10), pp.1571-1583.
  17. 박진아.배현숙(2008), "창원국가산업공단 근로자들의 작업복 착용실태에 관한 연구 -작업 분야별 작업복 기능성 및 동작요인을 중심으로 -", 한국의류학회지, 32(10), p.1577.
  18. 박진아.배현숙(2008), "창원국가산업공단 근로자들의 작업복 착용실태에 관한 연구 -작업 분야별 작업복 기능성 및 동작요인을 중심으로 -", 한국의류학회지, 32(10), pp. 1573-1577.
  19. "동남공단". 창원시, 자료검색일 2007. 4. 15, 자료출처 http://biz.gsnd.net