Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Structural Design and Analysis for the Reinforced Frame of Vehicle

자동차 보강 프레임에 대한 구조 설계 및 해석

  • 강성수 (전주대학교 기계자동차공학과) ;
  • 조성근 (전북대학교 대학원 정밀기계공학)
  • Received : 2010.05.04
  • Accepted : 2010.05.20
  • Published : 2010.08.15
Download PDF
⟨ Previous Next ⟩

Abstract

To achieve the structural safety of the vehicle, designs in various cases are carried out by using CATIA program. It is promoted the relaxation of stresses by collisions from the front portion, the side part and the rear portion of the vehicle. In this study, we conduct a variety of design of frames for the light weight frame of the vehicle and structural analysis, to protect the driver by adding reinforced frame. In the case of such a collision, there are maximum stresses greater than yield strength of steel and a very large local plastic deformation at the collision part.

Keywords

References

  1. Cho, J. U., Min, B. S., and Han, M. S., 2009, "Basic Study on Impact Analysis of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70.
  2. Kim, K. J., 2009, "Current and Future Technology of Car Crash Safety," Auto Journal, Vol. 10, pp. 107-111.
  3. Cho, J., U., Min, B. S., and Han, M. S., 2009, "Analysis on Fracture Stress of Car Body Collision," Proceedings of KSMPE Fall Conference 2009, pp. 28-29.
  4. Chae, S. W. and Jeong, J. H., 1997, "Development of a Finite Element Modeling System for Automobile Crash Analysis," Proceedings of KSAE Fall Conference 1997, pp. 1177-1182.
  5. Jang, I. S. and Chae, D. B., 2000, "The Derivation of Simplified Vehicle Body Stiffness Equation Using Collision Analysis," Journal of the Korean Society of Automotive Engineers, Vol. 8, No.4, pp. 177-185.
  6. Kim, S. S., 2002, Automotive Dynamics, Pearson Education, Korea.
  7. Park, S. H., Kang, S. Y., Kim, H. Y., and Han, D. C., 1997, "Development of Vehicle Crash Program and Analyses of Frontal Crash and Side Impact," Proceedings of KSAE Fall Conference 1997, pp. 883-889.
  8. Lee, S. S., 2004, CATIA V5 Basic Version 5.11, Science Technology, Korea.
  9. Liu, Y., 2010, "Development and evaluation of a finite element truck chassis crash model," International Journal of Crashworthilless, Vol. 15, No.1, pp. 107-113. https://doi.org/10.1080/13588260903047697
  10. Liu, Y. and Day, M. L., 2007, "Development of simplified thin-walled beam models for crashworthiness analyses," International Journal of Crashworthiness, Vol. 12, No.6, pp. 597-608. https://doi.org/10.1080/13588260701497888
  11. Kim, H. S., Kang, S. Y., Lee, I. H., Park, S. H., and Han, D. C., 1997, "Vehicle Frontal Crashworlhiness Analysis by Simplified Structure Modeling using Nonlinear Spring and Beam Elements," International Journal of Crashworthiness, Vol. 2, No.1, pp. 107-118.
  12. Park, H. S., Kim, J. H., and Dang, X. P., 2008, "Optimum Design of the Plastic Armrest Frame for Lightweight Automobiles," Proceedings of KSMTE Fall Conference 2008, pp. 172-178.