Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Correlation Between Crack Widths and Deflection in Reinforced Concrete Beams

철근콘크리트 보의 균열 폭과 처짐 관계

  • Received : 2010.01.07
  • Accepted : 2010.02.04
  • Published : 2010.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

The member deflection is one of the most important considerations for the serviceability evaluation of reinforced concrete (RC) structures, and the concept of the effective moment of inertia has been generally used for its estimation. However, the actual service load applied on an existing RC beam may not be easily obtained, for which the estimation of beam deflection by existing methods can be difficult to obtain. Therefore, based on the correlation between cracks and deflection in a RC beam, this study proposed a method to estimate the deflection of RC beams directly from the condition of cracks not using the actual loads acting on the member as its input data. The proposed method extensively utilized the relationships among sums of crack widths, average strains, and curvatures, and modification factors obtained from regression analysis were also introduced to improve its accuracy. The deflections of members were successfully estimated by the proposed method independent from applied loads, which was also easy to apply compared to the existing methods based on the effective moment of inertia.

철근콘크리트 구조물의 사용성을 검토할 때 처짐은 가장 중요한 사항 중 하나이며, 철근콘크리트 휨 부재의 처짐은 일반적으로 유효 단면2차모멘트의 개념을 적용하여 구해진다. 그러나 이미 사용중인 철근콘크리트 보에서 정확한 사용하중을 알기 어려운 경우에는 기존의 방법으로 처짐을 계산하는 것이 쉽지 않다. 따라서, 이 연구에서는 철근콘크리트 보에서 균열과 처짐은 상호 밀접한 관련이 있다는 사실을 바탕으로 작용하는 하중의 크기에 무관하게 철근 콘크리트 보 부재의 균열 상태로부터 처짐을 쉽게 산정할 수 있는 방법을 제안하고자 하였다. 균열폭의 합, 평균변형률 및 곡률 등의 관계를 이용하여 처짐식을 제안하였으며, 수정계수를 적용하여 보다 정확한 처짐식을 제안하고자 하였다. 이 제안식을 사용할 경우, 철근콘크리트 보에 작용하는 하중 크기에 무관하게 균열을 측정함으로써 처짐 추정치를 얻을 수 있으며, 유효 단면 2차 모멘트 값을 산출하여 처짐을 산정하는 기존의 방법에 비해 비교적 간단하게 처짐을 산출 할 수 있다.

Keywords

References

  1. 이승배, 박미영, 장수연, 김강수, 김상식, "사용하중상태에서 철근콘크리트 휨부재의 유효 단면2차모멘트에 대한 고찰", 한국콘크리트학회 논문집, 제20권 3호, 2008, pp.393-404.
  2. 박미영, 이승배, 김강수, 김상식, "철근콘크리트 단순보의 유효단면2차모멘트에 대한 모멘트 분포 형상의 영향분석", 한국콘크리트학회 논문집, 제21권 1호, 2008, pp.93-103. https://doi.org/10.4334/JKCI.2009.21.1.093
  3. 한국콘크리트학회, 2007년도 개정 콘크리트구조설계기준해설, 2007, p.523.
  4. ACI Committee 318, Building Code Requirements for Structural Concrete and Commentary(ACI 318M-05), American Concrete Institute, Farmington Hills, 2005, p.436.
  5. ACI Committee 435, "Deflections of Reinforced Concrete Flexural Members", American Concrete Institute Journal Proceedings, Vol. 63, No. 6, 1966, pp.637-674.
  6. Akmaluddin and Thomas C., "Experimental Verification of Effective Moment of Inertia Used in the Calculation of Reinforced Concrete Beam Deflection", Interational civil Engineering Conference, 2006, pp.89-98
  7. AL-Zaid R. Z., Al-Shaikh A. H., and Abu-Hussein, M., "Effect of Reinforcement Ratio on the Effective Moment of Inertia of Reinforced Concrete Beams", ACI Structural Joural, Vol. 88, No. 2, 1991, pp.184-190.
  8. Al-Shaikh, A. H. and Al-Zaid, R. Z., "Effect of Reinforcement Ratio on the Effective Moment of Inertia of Reinforced Concrete Beams", American Concrete Institute Structural Journal, Vol. 65, No. 9, 1993, pp. 144-149.
  9. Branson, D. E., "Instantaneous and Time-Dependent Deflections of Simple and Continuous Reinforced Concrete Beams", HPR Report No. 7, Part 1, Alabama-Highway Department/U.S. Breau of Public Roads, 1963/1965, pp. 1-78.
  10. Branson, D. E., Trost, H., "Unified Procedures for Predicting the Deflection and Centroidal Axis Location of Partially Cracked Nonprestressed and Prestressed Concrete Members", American Concrete Institute Journal Proceedings, Vol. 72, No. 2, 1982, pp.119-130.
  11. Chen W. F., Plasticity in Reinforced Concrete, McGraw-Hill, 1982, p.474.
  12. Chen, W. F. and Han, D. J., Plasticity for Structural Engineering, Springer-Verlag New York Inc., 1988, p.606.
  13. Collins, M. P., and Mitchell, D., Prestressed Concrete Structure, Prentice Hill, 1991, 766 pp.
  14. Fikry, A. M. and Thomas, C., "Development of a Model for the Effective Moment of Inertia of One-Way Reinforced Concrete Elements", American Concrete Institute Structural Journal, Vol. 95, No. 4, 1998, pp. 444-455.
  15. Gere, J. M., Mechanics of Mterials, Cengage Learning, 2009, p.1002.
  16. Harajli, M. H., and Kanj, M. Y., "Ultimate Flexural Strength of Concrete Members Prestressed With Unbonded Tendons", American Concrete Institute Structural Journal, Vol. 88, No. 6, 1991, pp.663-673.
  17. Macgregor, J. G. and Wight, J. K., Reinforced Comcrete Mechnics and Design, Prentice Hall, 2006, p.1111.

Cited by

  1. Flexural analysis of transverse joints of prefabricated T-girder bridge superstructure vol.77, pp.1, 2010, https://doi.org/10.12989/sem.2021.77.1.089