Journal of The Korean Society of Agricultural Engineers (한국농공학회논문집)

The Korean Society of Agricultural Engineers (한국농공학회)
권호 표지
DOI QR코드

DOI QR Code

Engineering Properties of Permeable Polymer Concrete for Pavement using Powdered Waste Glass and Recycled Coarse Aggregate

폐유리분말과 재생골재를 사용한 포장용 투수성 폴리머 콘크리트의 공학적 성질

  • 성찬용 (충남대학교 지역환경토목학과) ;
  • 김태호 (충남대학교 대학원 농공학과)
  • Received : 2011.08.24
  • Accepted : 2011.10.28
  • Published : 2011.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to evaluate the compressive and flexural strength, void ratio and permeability coefficient used powdered waste glass, $CaCO_3$, recycled coarse aggregate and unsaturated polyester resin to find optimum mix design of permeable polymer concrete for pavement. The compressive and flexural strength of permeable polymer concrete for pavement using powdered waste glass were in the range of 16.8~19.7 MPa and 4.7~6.1 MPa, respectively. it was satisfied the regulation of permeable concrete for pavement (18 MPa and 4.5 MPa). The void ratio and permeability coefficient were decreased with increasing the powdered waste glass, respectively. The void ratio and permeability coefficient were satisfied national regulation of permeable concrete for pavement (8 % and $1{\times}10^{-2}$ cm/s). In addition, this study found out that required amount of binder was decreased with increasing the powdered waste glass. This fact is expected to have economical effects during the use of powdered waste glass in the manufacture of permeable polymer concrete for pavement. Accodingly, the powdered waste glass can be used for permeable concrete material.

Keywords

References

  1. ACI., 1986. Guide for the use of polymers in concrete, Journal of the ACI 83(5): 798-829.
  2. Chae, C. W., 2002. Physical properties of porous concrete using admixtures. Journal of the Korea Concrete Institute 14(2): 257-265 (in Korean). https://doi.org/10.4334/JKCI.2002.14.2.257
  3. Ministry of Environment, 2007. Main waste generation and disposal current state (in Korean).
  4. Ohama, Y., 1973. Mix proportions and properties of polyester resin concrete, Polymers in Concrete. Journal of the ACI, SP 40-13. pp.283-294.
  5. Sung, C. Y., 1996. An experimental study on the mechanical properties of permeable polymer concrete. Journal of the Korean Society of Agricultural Engineers 38(5): 95-105 (in Korean).
  6. Sung, C. Y., and H. J. Jung, 1996. Engineering properties of permeable polymer concrete with stone dust and fly ash. Journal of the Korean Society of Agricultural Engineers 38(4): 147-154 (in Korean).
  7. Sung, C. Y., 1997. An experimental study on the development and engineering performance of rice-husk ash concrete. Journal of the Korean Society of Agricultural Engineers 39(5): 55-63 (in Korean).
  8. Sung, C. Y., and Y. I. Kim, 2007. Strengths and permeability properties of porous polymer concrete for pavement with different fillers. Journal of the Korean Society of Agricultural Engineers 49(4): 51-59 (in Korean). https://doi.org/10.5389/KSAE.2007.49.4.051
  9. Sung, C. Y., J. N. Youn, and Y. I. Kim, 2009. Physical and mechanical properties of porous concrete using waste activated carbon. Journal of the Korean Society of Agricultural Engineers 51(4): 21-27 (in Korean). https://doi.org/10.5389/KSAE.2009.51.4.021
  10. Sung, C. Y., and Y. I. Kim, 2010. Planting properties of porous polymer block using recycled coarse aggregates. Journal of Agricultural Science 37(1): 87-96 (in Korean).
  11. Sung, C. Y., and T. H. Kim, 2011. Engineering properties of permeable polymer concrete for pavement using powdered waste glass as filler. Journal of Agricultural Science 38(1): 145-151 (in Korean).
  12. Swamy, R. N., and A. H. Al-Hamed, 1984. The use of pulse velocity measurements to estimate strength of air-dried cubes and hence in situ strength of concrete. Journal of the ACI. 81(2): 247-276.
  13. Vipulanandan, C., N. Dharmarajan, and E. Ching, 1988. Mechanical behavior of polymer concrete system. Materials and Structures 21(124): 268-277. https://doi.org/10.1007/BF02481825
  14. Yeon, K. S., K. S. Kim, T. Y. Jang, K. H. Jung, M. K. Joo, and D. S. Choi, 1996. Physical and mechanical properties of polymer concrete using coal mine waste. Proceedings of the Korea Concrete Institute 13(1): 57-64 (in Korean).