Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Estimation of Machinability for Super Heat-resistant Alloys Inconel 600 in Turning Process

선삭가공에서 초내열합금 Inconel 600의 가공성 평가

  • 원종식 (창원폴리텍 7대학 컴퓨터응용기계과) ;
  • 임은성 (창원대학교 기계공학과 대학원) ;
  • 정윤교 (창원대학교 기계공학과)
  • Received : 2011.11.21
  • Accepted : 2011.12.06
  • Published : 2011.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, super heat-resistant alloy Inconel 600 come into spotlight as the material of airplane parts but this material causes lots of problems that is, reduction of machinability and attritious wear and breakage of cutting tool during turning processing due to high temperature strength and cohesion between tool material and Inconel 600. Therefore, in this study, it was purposed to determine tool material kind and to select of proper cutting range when turning process was carried out for Inconel 600. In order to these Purpose, coated carbide tool and ceramic tool was used in this experiment and the machinability of Inconel 600 was investigated from perspective of the cutting force, chipping and wear of tool and deposition phenomenon of chip.

Keywords

References

  1. D.G.Thakur, B.ramamoorthy, L.Vijayaraghavan, 2010, "Effect of high speed cutting parameters on the surface characteristics of Superalloy Inconel 718", Proceedings of the World Cogress on engineering 2010, Vol. III WCE 2010, June 30 - July 2, 2010, London, U.K.
  2. Krzysztof Jemielniak, "Rough turning of Inconel 718", 2009, Advances in manufacturing science and technology, Vol. 33, No. 3, 2009, pp. 5-15.
  3. K. W. Kim, H. M. Choi, W. S. Chae, D. H. Kim., 2003, "Performance of PVD and CVD coated carbide tools in maching Inconel 718", NuriMedia co., Ltd, pp. 41-48.
  4. Chang-soo Son., 1998, "High speed machining characteristics of Nikel-Based superalloy Inconel 718", Department of Mechanical and Precision Engineering, Graduate School, Pusan National University, pp. 43-44.
  5. Jong-Min Park, Won-Sik Choi, Soon-hong Kwon, Jin-hoon Cha,. 2009, "Optimal cutting conditions of surface roughness for Inconel 718 alloy in turning operation", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 48-53.
  6. J.H. Cha, S.B. Han., 2010, "Searching Optimal Cutting Condition for Surface Roughness in Turning Operation on Inconel 718 using Taguchi Method", Journal of the Korean Society of Machine Tool Engineers, Vol. 19 No. 2, 2010, 4, pp. 295-300.