Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Analysis of Moving Heat Source for Laser Assisted Machining of Plate by Feed Rate Control

이송속도 조절에 의한 평판 레이저 보조가공의 이동 열원해석

  • Kim, Kwang-Sun (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Lee, Choon-Man (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.)
  • 김광선 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Received : 2011.10.10
  • Accepted : 2011.10.21
  • Published : 2011.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Currently, many researches are carried out for laser assisted machining, which is one of the important fields in materials difficult to process. However, a prediction of heat source is difficult because of moving heat source. In this paper, a thermal analysis of laser assisted machining of plate by change of heat source size is performed, and preheating temperature by adjusting the feed rate is controlled. It was recognized that the maximum preheating temperature increases according to the decrease in heat source size, and feed rate need to adjust as high speed. The results of this analysis can be used as a reference for preheating temperature prediction in laser assisted milling.

Keywords

References

  1. Choi, S. D., Cheong, S. H., Kim, G. M., Yang, S. C. and Kim, J. G., "Characteristics of metal surface heat treatment by diode laser," Journal of Korean Society of Manufacturing Process Engineers, Vol. 6, No. 3, pp. 16-23, 2007.
  2. Lee, J. H., Shin, D. S., Suh, J., Cho, H. Y. and Kim, K. W., "Trends of Laser Integrated Machine," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 9, pp. 20-26, 2008.
  3. Jung, J. W. and Lee, C. M., "A study on the cutting tool and holder deformation prediction undergoing laser-assisted machining with moving heat sources," Journal of Korean Society for Precision Engineering, Vol. 26, No. 9, pp. 127-134, 2009.
  4. Yilbas, B. S., "Laser short-pulse heating: moving heat source and convective boundary considerations," Physica A: Statistical Mechanics and its Applications, Vol. 293, No. 1-2, pp. 157-177, 2011.
  5. Melkote, S., Kumar, M., Hashimoto, F. and Lahoti, G., "Laser assisted micro-milling of hard-to-machine materials," CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp. 45-48, 2009. https://doi.org/10.1016/j.cirp.2009.03.053
  6. Lee, J. H., Shin, D. S., Suh, J. and Lim, S. H., "Development of Laser Integrated Machine for Machining of Difficult to Cut Materials," Proc. of Korean Society of Mechanical Engineers Spring Conference, pp. 225-226, 2010.
  7. Trirkas, S. A., Papanikos, P. and Kermanidis, T., "Numerical Simulation of the Laser Welding Process in Butt-Joint Specimens," Journal of Materials Processing Technology, Vol. 134, No. 1, pp. 56-69, 2003.
  8. Ye, R., Smugeresky, J. E., Zheng, B., Zhou, Y. and Laverinia, E. J., "Numerical modeling of the thermal behavior during the LENS process," Journal of Materials Science and Engineering A, Vol. 428, No. 1-2, pp. 47-53, 2006. https://doi.org/10.1016/j.msea.2006.04.079
  9. Rozzi, J. C., Pfefferkorn, F. E. and Shin, Y. C., "Experimental evaluation of the laser assisted machining of silicon nitride ceramics," Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 666-670, 2000. https://doi.org/10.1115/1.1286556
  10. Kalyon, M. and Yilbas, B. S., "Laser pulse heating: a formulation of desired temperature at the surface," Optics and Lasers in Engineering, Vol. 39, No. 1, pp. 109-119, 2003. https://doi.org/10.1016/S0143-8166(02)00088-X
  11. Ahn, S. H. and Lee, C. M., "A study on large-area laser processing analysis in consideration of the moving heat source," International Journal of Precision Engineering and Manufacturing, Vol. 12, No. 2, pp. 285-292, 2011. https://doi.org/10.1007/s12541-011-0038-3
  12. Kim, J. H., Kim, K. S., Choi, J. Y. and Lee, C. M., "A Basic Study on the Analysis of Moving Laser Heat Source with Inclination Angle," Proc. of Korean Society for Precision Engineering Spring Conference, pp. 549-550, 2011.