Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental and Analytical Evaluation of Forming Characteristics for AZ31B Magnesium Alloy Sheet

AZ31B 마그네슘 합금판재의 성형특성 평가를 위한 실험적·해석적 연구

  • 이명근 (강원대학교 대학원) ;
  • 김형종 (강원대학교 기계의용공학과)
  • Received : 2010.12.21
  • Accepted : 2011.03.11
  • Published : 2011.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study aimed at providing an experimental database for the mechanical properties of AZ31B magnesium alloy sheet such as stress-strain curve, yield stress, R-value and forming limit diagram(FLD) at various strain-rates and temperatures. Tensile tests were carried out on specimens having the orientations of $0^{\circ}$, $45^{\circ}$ and $90^{\circ}$ to the rolling direction with different crosshead speeds in the range between 0.008 and 8 mm/s at temperature from 25(room temperature) to $300^{\circ}C$. The influence of the specimen gage length on the tensile properties was investigated. FLD tests were performed at punch speed of 0.1 and 1.0 mm/s in the same temperature range as that of the tensile tests. Swift cup tests were conducted to verify the usefulness of the material database and the reliability of the finite element analysis(FEA). The effects of strain-rate as well as temperature were taken into account in these simulations. It was shown that the FLD-based failure was reasonably well predicted by the thermal-deformation coupled analysis for this rate-sensitive material.

Keywords

References

  1. E. Doege, K. Droder, 2001, Sheet metal forming of magnesium wrought alloy formability and process technology, J. of Mat. Proc. Tech., Vol. 115, pp. 11-19.
  2. C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini, 2010, Effect of temperature, strain rate and fibre orientation on the plastic flow behavior and formability of AZ31 magnesium alloy, J. of Mat. Proc. Tech, Vol 210, pp. 1354-1363. https://doi.org/10.1016/j.jmatprotec.2010.03.025
  3. A. Wahab, E. Morsy, K. Manabe, Finite element analysis of magnesium AZ31 alloy sheet in warm deep-dreawing process considering heat transfer effect, Materials Letters, Vol. 60, pp. 1866-1870.
  4. S. C. Choi, H. Y. Kim, H. J. Kim, 2009, Prediction of the forming limit diagram for AZ31B sheet at elevated temperatures considering the strain-rate effect, Proc. Fall Conf. KSTP, pp. 235-238.
  5. H. Takuda, T. Morishita, T. Kinoshita, N. Shirakawa, 2005, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperature, J. of Mat. Porc. Tech, Vol. 164-165, pp. 1258-1262. https://doi.org/10.1016/j.jmatprotec.2005.02.034
  6. M. G. Lee, T. Park, K. Chung, H. Y. Kim, H. J. Kim, 2010, Basic material properties and forming limit of AZ31B magnesium alloy sheet, Proc. Fall Conf. KSTP, pp. 290-293.
  7. ARGUS, GOM mbH., http://www.gom.com
  8. International Standard, ISO 12004-2:2008(E)
  9. ASTM International, 2002, Standard test method for determining forming limit curves, ASTM E2218-02, pp. 2-7.
  10. S. C. Choi, H. Y. Kim, S. M. Hong, Y. S. Shin, G. H. Lee, H. J. Kim, 2009, Evaluation and prediction of the forming limit of AZ31B magnesium alloy sheet in a cross-shaped cup deep drawing process, Met. Mater. Int, Vol. 15, No. 4, pp. 575-584. https://doi.org/10.1007/s12540-009-0575-9
  11. PAM-STAMP 2G 2009, ESI-GROUP
  12. H. K. Kim, W. R. Lee, S. K. Hong, J. D. Kim, B. K. Han, 2006, Finite-element analysis of warm square cup deep drawing process of magnesium alloy AZ31 Sheet, KSTP, Vol. 15, No. 3, pp. 232-240. https://doi.org/10.5228/KSPP.2006.15.3.232
  13. M. H. Lee, H. Y. Kim, H. J. Kim, H. K. Kim, S. I. Oh, 2007, Forming analysis for warm deep drawing process of magnesium alloy sheet, KSTP, Vol. 16, No. 5, pp. 401-405. https://doi.org/10.5228/KSPP.2007.16.5.401

Cited by

  1. Development of Automotive Dash Panel Parts Using Warm Drawing of Magnesium Alloy AZ31B vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.248
  2. A Study on Warm Forming Technology of Car Body Reinforced Dash Using Magnesium Alloy Sheet vol.23, pp.5, 2014, https://doi.org/10.7735/ksmte.2014.23.5.519
  3. Development of warm forming parts for automotive body dash panel using AZ31B magnesium alloy sheets vol.16, pp.10, 2015, https://doi.org/10.1007/s12541-015-0278-8
  4. A Study on the Mechanical Properties and Formability of Mg AZ31B Sheet vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.495