DOI QR코드

DOI QR Code

Experimental study on two types of new beam-to-column connections

  • Ma, Hongwei (State Key Laboratory of Subtropical Architecture Science, South China University of Technology) ;
  • Jiang, Weishan (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Cho, Chongdu (Department of Mechanical Engineering, Inha University)
  • Received : 2009.12.04
  • Accepted : 2011.06.21
  • Published : 2011.07.25

Abstract

The new structure consisting of continuous compound spiral hoop reinforced concrete (CCSHRC)column and steel concrete composite (SCC) beam has both the advantages of steel structures and concrete structures. Two types of beam-to-column connections applied in this structural system are presented in this paper. The connection details are as follows: the main bars in beam concrete pass through the core zone for both types of connections. For connecting bar connection, the steel I-beam webs are connected by bolts to a steel plate passing through the joint while the top and bottom flanges of the beams are connected by four straight and two X-shaped bars. For bolted end-plate connection, the steel I-beam webs are connected by stiffened extended end-plates and eight long shank bolts passing through the core zone. In order to study the seismic behaviour and failure mechanisms of the connections, quasi-static tests were conducted on both types of full-scale connection subassemblies and core zone specimens. The load-drift hysteresis loops show a plateau for the connecting bar connection while they are excellent plump for bolted end-plate connection. The shear capacity formulas of both types of connections are presented and the values calculated by the formula agree well with the test results.

Keywords

Acknowledgement

Supported by : China New Building System Corp. LTD.

References

  1. American standard, (1997). "Seismic provisions for structural steel buildings." American Institute of Steel Construction, Chicago.
  2. Architectural Institute of Japan (AIJ). Design and construction of mixed structures composed of reinforced concrete columns and steel beams. 2001, Tokyo: Architectural institute of Japan. (in Japanese)
  3. Binici, B. (2005), "An analytical model for stress-strain behavior of confined concrete." Eng. Struct., 27(7), 1040-1051. https://doi.org/10.1016/j.engstruct.2005.03.002
  4. Bracci, J.M., Moore, W.P. and Bugeja, M.N. (1999), "Seismic design and constructability of RCS special moment frames." J. Struct. Eng. ASCE, 125(4), 385-392. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:4(385)
  5. Bugeja, M.N., Bracci, J.M. and Moore, W.P. (2000), "Seismic behavior of composite RCS frame systems." J. Struct. Eng. ASCE, 126(4), 429-436. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(429)
  6. Cheng, C.-T. and Chen, C.-C. (2005), "Seismic behavior of steel beam and reinforced concrete column connections."J. Constr. Steel. Res., 61(5), 587-606. https://doi.org/10.1016/j.jcsr.2004.09.003
  7. Chinese Standard. (2001). "Code for seismic design of buildings (GB50011-2001)." China archtectural and buildingpress, Beijing.
  8. Choi, S.M., Lee, S.H. et al. (2010). "Structural characteristics of welded built-up square CFT column-to-beam connections with external diaphragms." Steel. Comp. Struct., 10(3), 261-279. https://doi.org/10.12989/scs.2010.10.3.261
  9. Deierlein, G.G. and Noguchi, H. (2004), "Overview of U.S.-Japan Research on the Seismic Design of Composite Reinforced Concrete and Steel Moment Frame Structures." Jo. Struct. Eng. ASCE, 130(2), 361-367. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(361)
  10. Fargier-Gabaldon, L.B. and Parra-Montesinos, G.J. (2006), "Behavior of reinforced concrete column-steel beam roof level T-connections under displacement reversals." J. Struct.l Eng. ASCE., 132(7), 1041-1051. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:7(1041)
  11. Goel, S.C. (2004), "United States-Japan Cooperative Earthquake Engineering Research Program on Composite and Hybrid Structures." J. Struct. Eng. ASCE, 130(2), 157-158. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(157)
  12. Han, L.H. (2002), "Tests on stub columns of concrete-filled RHS sections." J. Const. Steel. Res., 58(3), 353-372. https://doi.org/10.1016/S0143-974X(01)00059-1
  13. Hadianfard, M.A. and Rahnema H. (2010). "Effects of RHS face deformation on the rigidity of beam-column connection." Steel. Comp. Struct., 10(6), 489-500. https://doi.org/10.12989/scs.2010.10.6.489
  14. Hwang, S.-K. and Yun, H.-D. (2004), "Effects of transverse reinforcement on flexural behaviour of high-strength concrete columns." Eng. Struct., 26(1), 1-12. https://doi.org/10.1016/j.engstruct.2003.08.004
  15. Jiang W.S. and Bai G.L. (1994), "Seismic behavior and Seismic design of short concrete column reinforced by compound hoops, spiral stirrups and X-shaped bars." J. Building. Struct., 15, 14.(in Chiese)
  16. Kanno, R. and Deierlein, G.G. (2000), "Design Model of Joints for RCS Frames." Design Model Of Joints For Rcs Frames. Composite Construction in Steel and Concrete IV-Proceedings of the United Engineering Foundation Conference, Banff, Alberta, Canada, 947-958.
  17. Kuramoto, H. and Nishiyama, I. (2004), "Seismic Performance and Stress Transferring Mechanism of Through-Column-Type Joints for Composite Reinforced Concrete and Steel Frames." J. Struct. Eng. ASCE, 130(2), 352-360. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(352)
  18. Liang, X.M. and Parra-Montesinos, G.J. (2004), "Seismic behavior of reinforced concrete column-steel beam subassemblies and frame systems." J. Struct. Eng. ASCE, 130(2), 310-319. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(310)
  19. Liu, J. and Astaneh-Asl, A. (2000), "Cyclic behavior of steel shear connections with floor slab." Comp. Hybrid. Struct., 1-2, 745-752.
  20. Minami. (1994), "The elastic and plastic behaviour of the long shank high strength bolted connection in the hybrid structure consisting of steel beam and concrete column." Annual. Symposium. Con. Struct. Architectural.Ins. Japan., 16, 2. (in Japanese)
  21. Nishiyama, I., Kuramoto, H. and Noguchi, H. (2004), "Guidelines: Seismic design of composite reinforced concrete and steel buildings." J. Struct. Eng. ASCE, 130(2), 336-342. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(336)
  22. Noguchi, H. and Uchida, K. (2004), "Finite element method analysis of hybrid structural frames with reinforced concrete columns and steel beams." J. Struct. Eng. ASCE, 130(2), 328-335. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(328)
  23. Parra-Montesinos, G. and Wight, J.K. (2000), "Seismic response of exterior RC column-to-steel beam connections." J. Struct. Eng. ASCE, 126(10), 1113-1121. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1113)
  24. Parra-Montesinos, G.J., Liang, X. and Wight, J.K. (2003), "Towards deformation-based capacity design of RCS beam-to-column connections." Eng. Struct., 25(5), 681-690. https://doi.org/10.1016/S0141-0296(02)00177-3
  25. Shibata, M., Nakazawa, A., Mihara, J., Masuo, K. and Minami, K. (1992), "Development of a Specially DesignedHigh-Strength Transverse Reinforcement for Square Concrete Columns." Proce. Tenth. World. Conference. Earthq. Eng., Madrid, Spain, July, 1-10, 3065-3070.
  26. Xiao, Y. and Martirossyan, A. (1998), "Seismic Performance of High-Strength Concrete Columns." J. Struct. Eng., 124(3), 241-251. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(241)

Cited by

  1. Experimental and numerical studies on the seismic behavior of steel reinforced concrete compression-bending members with new-type section steel vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624320
  2. Experimental study on mechanical performances of lattice steel reinforced concrete inner frame with irregular section columns vol.16, pp.3, 2014, https://doi.org/10.12989/scs.2014.16.3.253
  3. Experimental study on seismic performance of partial penetration welded steel beam-column connections with different fillet radii vol.17, pp.6, 2014, https://doi.org/10.12989/scs.2014.17.6.851
  4. Seismic behavior of steel reinforced concrete (SRC) joints with new-type section steel under cyclic loading vol.19, pp.6, 2015, https://doi.org/10.12989/scs.2015.19.6.1561
  5. Seismic behavior of confined RC column-composite beam joints vol.20, pp.3, 2014, https://doi.org/10.1007/s12209-014-2316-5
  6. Experimental study on shear capacity of SRC joints with different arrangement and sizes of cross-shaped steel in column vol.21, pp.2, 2016, https://doi.org/10.12989/scs.2016.21.2.267
  7. Analytical Investigation of the Flexural Capacity of Precast Concrete Frames with Hybrid Joints vol.2019, pp.1687-8094, 2019, https://doi.org/10.1155/2019/7470128
  8. Analysis of demountable steel and composite frames with semi-rigid bolted joints vol.28, pp.3, 2018, https://doi.org/10.12989/scs.2018.28.3.363
  9. In-plane structural analysis of blind-bolted composite frames with semi-rigid joints vol.31, pp.4, 2011, https://doi.org/10.12989/scs.2019.31.4.373
  10. The Composite Steel Reinforced Concrete Column Under Axial and Seismic Loads: A Review vol.19, pp.6, 2011, https://doi.org/10.1007/s13296-019-00257-9
  11. Influence of stiffeners on the performance of blind-bolt end-plate connections to CFST columns vol.36, pp.4, 2020, https://doi.org/10.12989/scs.2020.36.4.447