Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Prediction of moments in composite frames considering cracking and time effects using neural network models

  • Pendharkar, Umesh (Civil Engineering, Ujjain Engineering College) ;
  • Chaudhary, Sandeep (Structural Engineering, Malaviya National Institute of Technology) ;
  • Nagpal, A.K. (Civil Engineering, Indian Institute of Technology Delhi)
  • Received : 2010.06.03
  • Accepted : 2011.04.06
  • Published : 2011.07.25
⟨ Previous Next ⟩

Abstract

There can be a significant amount of moment redistribution in composite frames consisting of steel columns and composite beams, due to cracking, creep and shrinkage of concrete. Considerable amount of computational effort is required for taking into account these effects for large composite frames. A methodology has been presented in this paper for taking into account these effects. In the methodology that has been demonstrated for moderately high frames, neural network models are developed for rapid prediction of the inelastic moments (typically for 20 years, considering instantaneous cracking, and time effects, i.e., creep and shrinkage, in concrete) at a joint in a frame from the elastic moments (neglecting instantaneous cracking and time effects). The proposed models predict the inelastic moment ratios (ratio of elastic moment to inelastic moment) using eleven input parameters for interior joints and seven input parameters for exterior joints. The training and testing data sets are generated using a hybrid procedure developed by the authors. The neural network models have been validated for frames of different number of spans and storeys. The models drastically reduce the computational effort and predict the inelastic moments, with reasonable accuracy for practical purposes, from the elastic moments, that can be obtained from any of the readily available software.

Keywords

References

  1. Akbas, B. (2006), "A neural network model to assess the hysteretic energy demand in steel moment resisting frames", Struct. Eng. Mech., 23(2), 177-193. https://doi.org/10.12989/sem.2006.23.2.177
  2. Amadio, C. and Fragiacomo, M. (1997), "A simplified approach to evaluate creep and shrinkage effects in steel concrete composite beams", J. Struct. Eng.-ASCE, 123(9), 1153-1162. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1153)
  3. Arslan, M.H., Ceylan, M., Kaltakci, M.Y., Ozaby, Y. and Gulay, F.G. (2007), "Prediction of force reduction factor (R) of prefabricated industrial buildings using neural networks", Struct. Eng. Mech., 27(2), 117-134. https://doi.org/10.12989/sem.2007.27.2.117
  4. Bakhary, N., Hao, H. and Deeks, A.J. (2007), "Damage detection using artificial neural network with consideration of uncertainties", Eng. Struct., 29(11), 2806-2815. https://doi.org/10.1016/j.engstruct.2007.01.013
  5. Bazant, Z.P. (1972), "Prediction of concrete creep-effects using age adjusted effective modulus method", ACI J., 69(4), 212-217.
  6. Bradford, M.A., Manh, H.V. and Gilbert, R.I. (2002), "Numerical analysis of continuous composite beams at service loading", Adv. Struct. Eng., 5(1), 1-12. https://doi.org/10.1260/1369433021502498
  7. CEB-FIP MC 90 (1993), Model Code 1990 for Concrete Structures. Bulletin d' information No. 213/214. Comite' Euro International du Beton-Fe'de'ration International de la Pre'contrainte, Laussane, Switzerland.
  8. Chandak, R., Upadhyay, A. and Bhargava, P. (2008), "Shear lag prediction in symmetrical laminated composite box beams using artificial network", Struct. Eng. Mech., 29(1), 77-89. https://doi.org/10.12989/sem.2008.29.1.077
  9. Chang, S., Kim, D., Chang, C. and Cho, S.G. (2009), "Active response control of an offshore structure under wave loads using the modified probabilistic neural network", J. Mater. Sci. Technol., 14(2), 240.
  10. Chaudhary, S., Pendharkar, U. and Nagpal, A.K. (2007a), "Service load behavior of low rise composite frames considering creep, shrinkage and cracking", Latin Am. J. Solids Struct., 5(4), 237-258.
  11. Chaudhary, S., Pendharkar, U. and Nagpal, A.K. (2007b), "A hybrid procedure for cracking and time-dependent effects in composite frames at service load", J. Struct. Eng.-ASCE, 133(2), 166-175. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(166)
  12. Chaudhary, S., Pendharkar, U. and Nagpal, A.K. (2007c), "Bending moment prediction for continuous composite beams by neural networks", Adv. Struct. Eng., 10(4), 439-454. https://doi.org/10.1260/136943307783239390
  13. Cheng, J., Cai, C.S. and Xiao, R.C. (2007), "Application of artificial neural networks to the response prediction of geometrically nonlinear truss structures", Struct. Eng. Mech., 26(3), 251-262. https://doi.org/10.12989/sem.2007.26.3.251
  14. Cho, H.N., Cho, Y.M., Lee, S.C. and Hur, C.K. (2004), "Damage assessment of cable stayed bridges using probabilistic neural network", Struct. Eng. Mech., 17(3), 483-492. https://doi.org/10.12989/sem.2004.17.3_4.483
  15. Cruz, P.J.S., Mari, A.R. and Roca, P. (1998), "Non-linear time dependent analysis of segmentally constructed structures", J. Struct. Eng.-ASCE, 124(3), 278-287. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:3(278)
  16. Fragiacomo, M., Amadio, C. and Macorini, L. (2004), "Finite element model for collapse and long-term analysis of steel-concrete composite beams", J. Struct. Eng.-ASCE, 130(3), 489-497. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(489)
  17. Ghali, A., Favre, R. and Elbadry, M. (2002), Concrete Structures: Stresses and Deformations, Third Edition, Spon Press, London.
  18. Gilbert, R.I. and Bradford, M.A. (1995), "Time-dependent behavior of composite beams at service loads", J. Struct. Eng.-ASCE, 121(2), 319-327. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:2(319)
  19. Giri, V. and Upadhyay, A. (2006), "ANN based prediction of moment coefficients in slabs subjected to patch load", Struct. Eng. Mech., 24(4), 509-514. https://doi.org/10.12989/sem.2006.24.4.509
  20. Jeng, C.H. and Mo, Y.L. (2004), "Quick seismic response estimation of prestressed concrete bridges using artificial neural networks", J. Comput. Civil Eng.-ASCE, 118(4), 360-369.
  21. Jiang, S.F., Zhang, C.M. and Koh, C.G. (2006), "Structural damage detection by integrating data fusion and probabilistic neural network", Adv. Struct. Eng., 9(4), 445-458. https://doi.org/10.1260/136943306778812787
  22. Kim, D.H., Kim, D. and Chang, S.K. (2009a), "Application of lattice probabilistic neural network for active response control of offshore structures", Struct. Eng. Mech., 31(2), 153-162. https://doi.org/10.12989/sem.2009.31.2.153
  23. Kim, D., Kim, D.H., Cui, J., Seo, H.Y. and Lee, Y.H. (2009b), "Iterative neural network strategy for static model identification of an FRP deck", Steel Compos. Struct., 9(5), 445-455. https://doi.org/10.12989/scs.2009.9.5.445
  24. Kwak, H.G. and Seo, Y.J. (2000), "Long term behavior of composite girder bridges", Comput. Struct., 74(5), 583-599. https://doi.org/10.1016/S0045-7949(99)00064-4
  25. Lee, J.J., Lee, J.W., Yi, J.H., Yun, C.B. and Jung, H.Y. (2005), "Neural network-based damage detection for bridges considering errors in baseline finite element models", J. Sound Vib., 280(3-5), 555-578. https://doi.org/10.1016/j.jsv.2004.01.003
  26. Mari, A. (2000), "Numerical simulation of the segmental construction of three dimensional concrete frames", Eng. Struct., 22(6), 585-596. https://doi.org/10.1016/S0141-0296(99)00009-7
  27. Mo, Y.L., Hung, H.Y. and Zhong, J. (2002), "Investigation of stress-strain relationship of confined concrete in hollow bridge columns using neural networks", Journal of Testing and Evaluation, ASTM, 30(4), 330-339. https://doi.org/10.1520/JTE12323J
  28. Pendharkar, U. (2007), "Neural network model for composite beams and frames considering cracking and timeeffects", Ph.D. Thesis, IIT Delhi, Delhi.
  29. Pendharkar, U., Chaudhary, S. and Nagpal, A.K. (2007), "Neural network for bending moment in continuous composite beams considering cracking and time effects in concrete", Eng. Struct., 29(9), 2069-2079. https://doi.org/10.1016/j.engstruct.2006.11.009
  30. Pendharkar, U., Chaudhary, S. and Nagpal, A.K. (2010), "Neural networks for inelastic mid-span deflections in continuous composite beams", Struct. Eng. Mech., 36(2), 165-179. https://doi.org/10.12989/sem.2010.36.2.165
  31. SNNS (1998), User's Manual, Ver. 4.2, University of Sttutgart, Institute for Parallel and Distributed High Performance Systems
  32. Yeung, W.T. and Smith, J.W. (2005), "Damage detection in bridges using neural networks for pattern recognition of vibration signatures", Eng. Struct., 27(5), 685-698. https://doi.org/10.1016/j.engstruct.2004.12.006

Cited by

  1. Linear and Non-linear Creep models for a multi-layered concrete composite vol.13, pp.4, 2013, https://doi.org/10.1016/j.acme.2013.04.002
  2. Closed-form expressions for long-term deflections in high-rise composite frames vol.17, pp.1, 2017, https://doi.org/10.1007/s13296-016-0115-7
  3. Application of artificial neural networks (ANNs) and linear regressions (LR) to predict the deflection of concrete deep beams vol.11, pp.3, 2013, https://doi.org/10.12989/cac.2013.11.3.237
  4. Rapid prediction of long-term deflections in composite frames vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.547
  5. Rapid prediction of deflections in multi-span continuous composite bridges using neural networks vol.15, pp.4, 2015, https://doi.org/10.1007/s13296-015-1211-9
  6. Explicit expression for effective moment of inertia of RC beams vol.12, pp.3, 2015, https://doi.org/10.1590/1679-78251272
  7. Optimum seismic design of unbonded post-tensioned precast concrete walls using ANN vol.13, pp.4, 2014, https://doi.org/10.12989/cac.2014.13.4.547
  8. Rapid prediction of inelastic bending moments in RC beams considering cracking vol.18, pp.6, 2011, https://doi.org/10.12989/cac.2016.18.6.1113
  9. Neural network based approach for rapid prediction of deflections in RC beams considering cracking vol.19, pp.3, 2011, https://doi.org/10.12989/cac.2017.19.3.293
  10. Explicit expressions for inelastic design quantities in composite frames considering effects of nearby columns and floors vol.64, pp.4, 2011, https://doi.org/10.12989/sem.2017.64.4.437
  11. An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams vol.70, pp.6, 2019, https://doi.org/10.12989/sem.2019.70.6.751
  12. A new empirical formula for prediction of the axial compression capacity of CCFT columns vol.33, pp.2, 2019, https://doi.org/10.12989/scs.2019.33.2.181