DOI QR코드

DOI QR Code

Pool Boiling Heat Transfer Coefficients of Water Up to Critical Heat flux on Enhanced Surfaces

열전달 촉진 표면에서 임계 열유속까지의 물의 풀 비등 열전달계수

  • 이요한 (인하대학교 기계공학과 대학원) ;
  • 강동규 (인하대학교 기계공학과 대학원) ;
  • 정동수 (인하대학교 기계공학과)
  • Received : 2010.11.04
  • Accepted : 2011.01.17
  • Published : 2011.03.10

Abstract

In this work, nucleate pool boiling heat transfer coefficients(HTCs) of pure water are measured on horizontal 26 fpi low fin, Turbo-B and Thermoexcel-E square surfaces of 9.53 mm length. HTCs are taken from 10 $kW/m^2$ to critical heat flux for all surfaces. Test results show that critical heat fluxes(CHFs) of all enhanced surfaces are greatly improved as compared to that of a plain surface. CHFs of water on the 26 fpi low fin surface, Thermoexcel-E surface, and Turbo-B are increased up to 320%, 275%, and 150% as compared to that of the plain surface, respectively. CHF of the Turbo-B enhanced surface is lower than that of the 26 fpi low fin surface due to the surface geometry. The heat transfer enhancement ratios of the Thermoexcel-E surface, low fin surface and Turbo-B enhanced surface are 1.6~2.9, 1.6~2.1, 1.4~1.7 respectively in the range of heat fluxes tested. Judging from these results, it can be said that these types of enhanced surfaces can be used in heat transfer applications at high heat fluxes.

Keywords

References

  1. Webb, R. J., 1994, Principles of enhanced heat transfer, John Wiley and Sons Inc., New York, pp. 311-372.
  2. Benjamin, J. E. and Westwater, J. W., 1961, Bubble growth in nucleate boiling of a binary mixture, Int. Development in Heat Transfer, ASME, New York, pp. 212-218.
  3. Fujie, K., Nakyama, H., Kuwahara, H., and Kakizaki, K., 1977, Heat transfer wall for boiling liquids, US Patent, 4,060,125.
  4. Webb, R. L. and Pais, C., 1992, Nucleate pool boiling data for five refrigerants on plain, integral-fin and enhanced tube geometries, Int. J. Heat Mass Transfer, Vol. 35, No. 8, pp. 1893-1904. https://doi.org/10.1016/0017-9310(92)90192-U
  5. Tatara, R. A. and Payvar, P., 2000, Pool boiling of pure R134a from a single Turbo-BIIHP tube, Int. J. Heat and Mass Transfer, Vol. 43, pp. 2233-2236. https://doi.org/10.1016/S0017-9310(99)00294-X
  6. Park, J. S., Kim, J. G., Jung, D., and Kim, Y. I., 2001, Pool boiling heat transfer coefficients of new refrigerants on various en enhanced tubes, Korea Journal of Air-Conditioning and Refrigeration Engineering, Vol. 13, No. 8, pp. 710-719.
  7. Hesse, G., 1973, Heat transfer in nucleate boiling maximum heat flux and transition boiling, International Journal of Heat and Mass Transfer, Vol. 16, pp. 1611-1627. https://doi.org/10.1016/0017-9310(73)90188-9
  8. Chen, Q., Windisch, R. and Hahne, E., 1989, Pool Boiling Heat Transfer on Finned Tubes, Proceedings of Eurotherm Seminar, Advances in Pool Boiling Heat Transfer, Paderborn, FRG, Vol. 8.
  9. Hahne, E., Qiu-Rong, C. and Windisch, R., 1991, Pool boiling heat transfer on finned tubes-an experimental and theoretical study, International Journal of Heat and Mass Transfer, Vol. 34, pp. 2071-2079. https://doi.org/10.1016/0017-9310(91)90218-4
  10. Kim, J. H., Kwak, T. H., Jung, D., and Kim, C. B., 1995, Pool boiling heat transfer characteristics of low-fin tubes in CFC11, HCFC123 and HCFC141b, Transaction of KSME(B), Vol. 19, No. 9, pp. 2316-2327.
  11. Park, K. J., Jung, D. and Shim, S. E., 2009, Nucleate boiling heat transfer in aqueous solutions with carbon nanotubes up to critical heat fluxes, International Journal of Multiphase Flow, Vol. 35, No. 6, pp. 525-532. https://doi.org/10.1016/j.ijmultiphaseflow.2009.02.015
  12. Kline, S. J. and McClintock, F. A., 1953, Describing uncertainties in single-sample experiments, Mechanical Engineer, Vol. 75, pp. 3-8.
  13. Gorenflo, D. and Fath, W., 1987, Pool boiling heat transfer on the outside of finned tubes at high saturation pressures, Proc. 17th Int. Congr. Refrig., pp. 955-960.