Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Spectroscopic Analysis of Silica Nanoparticles Modified with Silane Coupling Agent

실란 커플링제에 의해 표면이 개질된 실리카 나노입자의 분광학적 분석

  • Song, Seong-Kyu (Department of Chemical Engineering, Keimyung University) ;
  • Kim, Jung-Hye (Department of Chemical Engineering, Keimyung University) ;
  • Hwang, Ki-Seob (Department of Chemical Engineering, Keimyung University) ;
  • Ha, Ki-Ryong (Department of Chemical Engineering, Keimyung University)
  • Published : 2011.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, we used 3-(trimethoxysilyl)propylmethacrylate(MPS) silane coupling agent for surface modification of silica nanoparticles. We studied effects of reaction conditions such as solvent pH, MPS hydrolysis time, reaction time, and molar ratio of MPS to Si-OH groups on silica nanoparticle surfaces, on the surface modification reactions of silica nanoparticles. Fourier Transform Infrared Spectroscopy(FTIR), Elemental Analysis(EA) and solid state crosspolarization magic angle spinning(CP/MAS) Nuclear Magnetic Resonance Spectroscopy(NMR) techniques were used to determine the type and the degree of surface modification. We found MPS reacts preferentially with Si-OH groups of the silica nanoparticles as monomeric form at solvent pH = 4.5. But increasing hydrolysis time of MPS from 30 mins to 90 mins, and molar ratio of MPS to Si-OH groups on silica nanoparticle surfaces, we found that MPS reacts preferentially with Si-OH groups of the silica nanoparticles as oligomeric form.

본 연구에서는 실리카 나노 입자의 표면 개질을 위해 실란 커플링제인 3-(trimethoxysilyl)propylmethacrylate(MPS) 를 사용하여 표면 개질 반응을 수행하였다. 용매의 pH, MPS의 가수 분해 반응시간, 표면 개질 반응시간 및 실리카 표면의 실라놀기(Si-OH)에 대한 MPS의 몰 비를 변화하여 각각의 반응조건이 실리카 표면개질 반응에 미치는 영향을 연구하였다. 개질반응 후 Fourier Transform Infrared Spectroscopy(FTIR), 원소분석(EA) 및 고체 상태 cross-polarization magic angle spinning(CP/MAS) Nuclear Magnetic Resonance Spectroscopy(NMR)법을 사용하여 표면이 개질된 실리카 입자들의 분석을 수행하였다. 연구 결과 용매의 pH가 4.5일 때 MPS가 단량체 형태로 실리카 표면의 실라놀기와 반응하고 이외의 pH에서는 MPS가 이량체, 삼량체 혹은 사량체의 올리고머 형태로 실리카의 실라놀기와 반응함이 우세함을 나타내었다. 가수분해반응 시간을 30분에서 90분으로 증가시키면 MPS가 올리고머 형태로 실리카 표면의 실라놀기와 반응하는 것이 우세하고, 투입한 MPS 몰 비의 증가도 MPS가 올리고머 형태로 실리카 표면의 실라놀기와 반응하는 것이 우세함을 나타내었다.

Keywords

References

  1. Yang, Y. C., Yang, S. Y. and Yoon, P. R., "Determination of Acidbase Properties of Silica Treated with Silane Coupling Agent by Inverse Gas Chromatography," Korean Society for Geosystem Engineering, 40(5), 299-308(2003).
  2. Park, H. K. and Park, K. Y., "Dry synthesis of Nearly Monodisperse Spherical Silica," Korean Chem. Eng. Res. (HWAHAK KONGHAK), 45(6), 677-679(2007).
  3. Song, S. A., "Surface Modification of Nanosize Fumed Silica," Master's degree Dissertation, Korea Advanced Institute of Science and Technology, Republic of Korea, Daejeon(2001).
  4. Park, S. J. and Cho, K. S., "Filler-Elastomer Interactions. 8. Influence of Fluorinated Nanoscaled Silicas on Mechanical Interfacial Properties and Thermal Stabilities of Polyurethane Matrix Composites," Polymer(Korea), 27(2), 91-97(2003).
  5. Rosen, M. R., "From Treating Solution to Filler Surface and Beyond," J. Coating Tech., 50(644), 70-82(1987).
  6. Oh, E. S., Yang, Y. C., Joeng, S. B., Chae, Y. B. and Yoon, P. R., "Surface Properties of Silica Treated with Silane Coupling Agents," Korean Society for Geosystem Engineering, 39(2), 88-97(2002).
  7. Arkles, B., "Tailoring Surfaces with Silanes," Chemtech, 7, 766- 778(1977).
  8. Technical Bulletin Pigments No. 11, "Basic Characteristics of Aerosil," Evonik Degussa Corp.
  9. Xie, X. Q., Ranade, S. V. and Dibenedetto, A. T., "A Solid State NMR Study of Polycarbonate Oligomer Grafted onto the Surface of Amorphous Silica," Polymer, 40, 6297-6306(1999). https://doi.org/10.1016/S0032-3861(99)00018-X
  10. Innocenzi, P. and Brusatin, G., "A Comparative FTIR Study of Thermal and Photo-polymerization Processes in Hybrid Sol-gel Filmes," J. of Non-Crystalline Solids, 333, 137-142(2004). https://doi.org/10.1016/j.jnoncrysol.2003.09.043
  11. Shin Etsu Silicone: "Silane Coupling Agents," Catalog.
  12. Brindle, R., Pursch, M. and Albert, K., "$^{1}H$ MAS NMR Spectroscopy of Chemically Modified Silica Gels: a Fast Method to Characterize Stationary Interphases for Chromatography," Solid State Nuclear Magnetic Resonance, 6, 251-266(1996). https://doi.org/10.1016/0926-2040(96)01227-1
  13. Albert, K., Pfleiderer, B., Bayer, E. and Schnabel, R., "Characterization of Chemically Modified Glass Surfaces by 13C and 29Si CP/MAS NMR Spectroscopy," J. Colloid Interface Sci., 142(1), 35-40(1991). https://doi.org/10.1016/0021-9797(91)90031-3
  14. Joseph, R., Zhang, S. and Ford, W. T., "Structure and Dynamics of a Colloidal Silica-poly(methyl methacrylate) Composite by $^{13}C\;and\;^{29}Si$ MAS NMR Spectroscopy," Macromolecules, 29, 1305-1312(1996). https://doi.org/10.1021/ma951111z
  15. Luo, J., Lannutti, J. and Seghi, R., "Solid-state NMR Evaluation of the Silane Structure on Nanoporous Silica Fillers," J. Adhesion Sci. Technol., 15(3), 267-277(2001). https://doi.org/10.1163/156856101750196748
  16. Chung, J. S., Kim, D. J., Ahn, W. S., Ko, J. H. and Cheong, W. J., "Synthesis, Characterization, and Applications of Organicinorganic Hybrid Mesoporous Silica," Korean J. Chem. Eng., 21(1), 132-139(2004). https://doi.org/10.1007/BF02705391

Cited by

  1. Design of Hard Coating Resin for In-mold Decoration (IMD) Foil and Effects of EB Irradiation on IMD Foil Layers vol.36, pp.3, 2012, https://doi.org/10.7317/pk.2012.36.3.268
  2. Synthesis and Characterization of Epoxy Silane-modified Silica/Polyurethane-urea Nanocomposite Films vol.50, pp.2, 2012, https://doi.org/10.9713/kcer.2012.50.2.371
  3. Effect of Isocyanate Group on the Physical Properties of Hydrogel Contact Lenses Containing Silane vol.56, pp.5, 2012, https://doi.org/10.5012/jkcs.2012.56.5.597
  4. A Study on the Peel Strength of Silane-treated Silicas-filled Epoxy Adhesives vol.25, pp.5, 2014, https://doi.org/10.14478/ace.2014.1079
  5. Optimal Mixing Ratios of Silica and Hybrid Resin with Epoxy Resin for Concrete Floor Surface Covering vol.27, pp.3, 2015, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001061
  6. Bis[3-(triethoxysilylpropyl)]tetrasulfide에 의한 실리카 입자의 표면개질 반응과 SBR 나노 복합체 응용 vol.37, pp.3, 2011, https://doi.org/10.7317/pk.2013.37.3.308
  7. CO2 흡착 충전제 제조를 위한 microcrystalline cellulose (MCC) 입자 표면개질연구 vol.55, pp.1, 2017, https://doi.org/10.9713/kcer.2017.55.1.60
  8. 콜로이드 실리카를 이용한 UV 경화형 친수성 코팅 도막 제조 vol.55, pp.6, 2011, https://doi.org/10.9713/kcer.2017.55.6.754
  9. 아미노기를 도입한 Microcrystalline Cellulose(MCC)를 충전제로 사용한 PU 복합체 제조 및 물성 연구 vol.42, pp.1, 2011, https://doi.org/10.7317/pk.2018.42.1.147
  10. 광경화 3D 프린팅 공정을 위한 실리카 복합소재 합성 및 특성 분석 vol.29, pp.1, 2011, https://doi.org/10.3740/mrsk.2019.29.1.23
  11. 실리카 복합소재의 물성에 따른 DLP 3D printing 적용 연구 vol.29, pp.2, 2019, https://doi.org/10.6111/jkcgct.2019.29.2.054
  12. 광경화 나노 실리카 잉크의 합성 및 잉크젯 프린팅 적층 특성평가 vol.29, pp.6, 2011, https://doi.org/10.6111/jkcgct.2019.29.6.345
  13. 디젤엔진에 적용하기 위한 SiC DPF용 접합제의 극성 및 첨가물에 따른 물리적 특성 변화에 관한 연구 vol.25, pp.7, 2011, https://doi.org/10.7837/kosomes.2019.25.7.974
  14. Optimization of Hybrid Ink Formulation and IPL Sintering Process for Ink-Jet 3D Printing vol.11, pp.5, 2011, https://doi.org/10.3390/nano11051295