Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Current Control Scheme of High Speed SRM Using Low Resolution Encoder

  • Received : 2010.09.13
  • Published : 2011.07.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a balanced soft-chopping circuit and a modified PI controller for a high speed 4/2 Switched Reluctance Motor (SRM) with a 16 pulse per revolution encoder. The proposed balanced soft-chopping circuit can supply double the switching frequency in the fixed switching frequency of power devices to reduce current ripple. The modified PI controller uses maximum voltage, back-emf voltage and PI control modes to overcome the over-shoot current due to the time delay effect of current sensing. The maximum voltage mode can supply a fast excitation current with consideration of the hardware time delay. Then the back-emf voltage mode can suppress the current over-shoot with consideration of the feedback signal delay. Finally, the PI control mode can adjust the phase current to a desired value with a fast switching frequency due to the proposed balanced soft-chopping technology.

Keywords

References

  1. R. Krishnan, Switched reluctance motors drives: Modeling, simulation, analysis, design, and application, CRC Press, 2001
  2. N. Bianchi, S. Bolognani, and F. Luise, "High speed drive using a slotless PM motor," IEEE Trans. Power Electron., Vol. 21, No.4, pp. 1083-1090, Jul. 2006.
  3. M. J. Turner, P. Y. P. Wung, and R. S. Wallace, "Comparing European 132 frame switched reluctance and induction motor drives," in Proc. IECON, Vol. 2, pp. 403- 408, 1997.
  4. T. Higuchi, J. O. Fiedler, and R. W. De Doncker, "On the design of a single-phase switched reluctance motor," in Proc. IEMDC, Vol. 1, pp. 561-567, 2003.
  5. S. Kozuka, N. Tanabe, J. Asama, and A. Chiba, "Basic characteristics of 150,000r/min switched reluctance motor drive," in Proc. Power and Energy Society General Meeting, pp. 1-4, 2008.
  6. H. Kuss, T. Wichert, and B. Szvmanski, "Design of a high speed Switched Reluctance Motor for spindle drive," in Proc. CPE, pp.1-5, 2007.
  7. K. Kajiwara, Y.-J. Kim, and H. Dohmeki, "Analysis of the maximizing start torque of Switched Reluctance Motor for super high speed drive," in Proc. ICEMS, pp.1428-1432, 2007.
  8. T. Genda and H. Dohmeki, "Characteristics of 4/2 Switched Reluctance Motor for a high speed drive by the excitation angle," in Proc. ICEMS, pp. 1-6, Nov. 2009.
  9. I. R. Kartono, K. Kajiwara, and H. Dohmeki, "Dynamic simulation of maximizing the starting torque for super-high-speed drive of a 4/2 Switched Reluctance Motor," in Proc. ICEMS, pp. 1-6, Sep. 2008
  10. J. W. Ahn, T. H. Kim, and D. H. Lee, "Performances of SRM for LSEV," Journal of Power Electronics, Vol. 5, No. 1, pp. 45-54, Jan. 2005.
  11. K. Ohyama, M. Naguib, F. Nashed, K. Aso, H. Fujii, and H. Uehara, "Design using finite element analysis of a switched reluctance motor for electric vehicle," Journal of Power Electronics, Vol. 6, No. 2, pp. 163-171, Apr. 2006.

Cited by

  1. Thermal Model for Power Converters Based on Thermal Impedance vol.13, pp.6, 2013, https://doi.org/10.6113/JPE.2013.13.6.1080
  2. Design and Drive Characteristics of Low Voltage 8/6 SRM for Fan Application vol.63, pp.10, 2014, https://doi.org/10.5370/KIEE.2014.63.10.1371
  3. Influence of Relative Humidity on the Temperature Increase of a Power Converter vol.15, pp.3, 2015, https://doi.org/10.6113/JPE.2015.15.3.841