Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지
DOI QR코드

DOI QR Code

High Strength Aluminum Alloy for Die Casting

다이캐스팅용 고강도 알루미늄 합금

  • Kim, Ki-Tae (Foundry Technology Center, Korea Institute of Industrial Technology)
  • 김기태 (한국생산기술연구원 주조기술센터)
  • Published : 2011.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. J.R. Davis : ASM Specialty Handbook, "Aluminum and Aluminum Alloys" (1996).
  2. E.J. Wall, R. Sullivan, J. Carpenter : Progress Report for Automotive Light weighting Materials, (2004).
  3. L. Jen, Y. Xinyan and Z. Wenping : PCT Patent, "High strength, high stress corrosion cracking resistant and castable Al-Zn-Mg-Cu-Zr alloy for shape cast products" WO 2008/ 036760 (2008).
  4. J. Dong, J.Z. Cui, F.X. Yu, Z.H. Zhao and Y.B. Zhuo : J. Mater. Proc. Tech., "A new way to cast high-alloyed Al-Zn-Mg-Cu-Zr for super-high strength and toughness" 171 (2007) 399-404.
  5. D. Jie, C. Jianzhong, D. Wenjiang : J. Crystal Growth, "Theoretical discussion of the effect of a low-frequency electromagnetic vibrating field on the as-cast microstructures of DC Al-Zn-Mg-Cu-Zr ingots" 295 (2006) 179-187. https://doi.org/10.1016/j.jcrysgro.2006.07.025
  6. J. Dong, J. Cui, X. Zeng and W. Ding : Mater. Letters, "Effect of low-frequency electromagnetic field on microstructures and macrosegregation of $\varphi$270 mm DC ingots of Al-Zn-Mg- Cu-Zr alloy" 59 (2005) 1502-1506. https://doi.org/10.1016/j.matlet.2005.01.009
  7. S. Geoffrey K : US Patent, "Method for grain refinement of high strength aluminum casting alloys" 6,645,321 (2003).
  8. Z. Yubo, C. Jianzhong, Z. Zhihao, Z. Haitao, and Q. Ke : Mater. Sci. Eng. A, "Effect of low frequency electromagnetic field on casting crack during DC casting superhigh strength aluminum alloys ingots" 406 (2005) 286-292. https://doi.org/10.1016/j.msea.2005.07.001
  9. B. Zhang, J. Cui and G. Lu : Mater. Sci. Eng. A, "Effect of lowfrequency electromagnetic field on microstructures and macrosegregation of continuous casting 7075 aluminum alloy" 355 (2003) 325-330. https://doi.org/10.1016/S0921-5093(03)00105-9
  10. R.K. Paramatmuni, K.M. Chang, B.S. Kang and X. Liu : Mater. Sci. Eng. A, "Evaluation of cracking resistance of DC casting high strength aluminum ingots" 379 (2004) 293-301. https://doi.org/10.1016/j.msea.2004.02.026

Cited by

  1. Microstructure and Mechanical Properties on Solid Solution Heat Treatment of Al-6Si-2Cu Alloy for Lightweight Automotive vol.24, pp.10, 2014, https://doi.org/10.3740/MRSK.2014.24.10.538
  2. Microstructural and Mechanical Characteristics of Al-Si-Cu Die Casting Alloy for Engine Mount Bracket vol.27, pp.6, 2014, https://doi.org/10.12656/jksht.2014.27.6.281
  3. A Study on the Electrochemical Characteristics of Al-Si Casting Alloys in NaCl Solution vol.18, pp.6, 2014, https://doi.org/10.9726/kspse.2014.18.6.029
  4. Mg+Al2Ca 첨가 ADC12 (Al-Si-Cu) 합금의 미세조직, 인장 및 고주기 피로 특성 vol.26, pp.5, 2011, https://doi.org/10.5228/kstp.2017.26.5.306
  5. ADC12 다이캐스팅 합금의 미세조직 및 기계적 특성에 미치는 개량 원소 첨가의 영향 vol.28, pp.1, 2011, https://doi.org/10.5228/kstp.2019.28.1.34
  6. Microstructure and Mechanical Property of Al6Si2Cu Alloy Subjected to Double-Solution Heat Treatment vol.12, pp.1, 2011, https://doi.org/10.3390/met12010018