Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction and Reduction of Transient Vibration of Piping System for a Rotary Compressor

공조용 압축기 배관계의 과도진동 예측 및 저감설계

  • Received : 2011.05.24
  • Accepted : 2011.06.29
  • Published : 2011.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with the process to identify the transient exciting force generated from a rotary compressor. The compressor was assumed to be a rigid body. The equation of motion of a rigid compressor supported by three mounts was derived with 6 degree-of-freedom. The exciting forces at the center of mass of the compressor were estimated from the acceleration data measured at compressor shell. Compressor-pipe system was modeled numerically. The accelerations of compressor and pipe were predicted numerically by using the estimated exciting force. A new shape of pipe model was proposed to reduce the vibration. In the prediction by the method in this paper, the maximum acceleration of the pipe could be reduced by 53.7 % at the steady-state and by 12 % at the transient process. In the real experiments, the maximum acceleration of the pipe was reduced by 54.2 % at steady-state and 14.7 % at the transient process. It was verified that the numerical results showed good agreement with experimental results.

Keywords

References

  1. Kim, H. J., Hwang, S. J. and Jim, U. K., 2006, Vibration Reduction of Marine Air Compressor Using Dynamic Vibration Absorber, Journal of the Korean Society of Marine Engineering First Conference, pp. 35-36.
  2. Jeon, S. H., Jeong, W. B., Won, S. G. and Lee, H. J., 2007, Design of Connecting Part of Linear Compressor to Reduce the Vibration Level of 60 Hz, Proceedings of the KSNVE Annual Autumn Conference, pp. 1360-1365.
  3. Ryu, S. M., Jeong, W. B., Han, H. S. and Ahn, J. W., 2010, Optimal Design of Mount for Vibration Reduction of an Rotary Compressor, Proceedings of the KSNVE Annual Spring Conference, pp. 142-143.
  4. Min, J. H., Choi, D. H. and Jung, D. H., 2009, Shape Optimization of an Air Conditioner Piping System, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 11, pp. 1151-1157. https://doi.org/10.5050/KSNVN.2009.19.11.1151
  5. Kim, J. H., Park, C. B., Choi, S. Y. and Min, J. H., 2004, Optimal Design of Pipe Configuration of an Air Conditioner Outdoor Unit Considering Vibration Characteristics, Transactions of the Korean Society of Mechanical Engineering Annual Autumn Conference, pp. 655-660.
  6. Kim, J. H., Jeong, W. B., Hwang, S. W. and Ahn, S. J., 2002, Analysis of Transient Response of Air-conditing Rotary Compressors Considering the Coupled Effect of Motor, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 11, pp. 847-885. https://doi.org/10.5050/KSNVN.2002.12.11.847
  7. Lee, H. W., Ryu, S. M., Jeong, W. B., Han, H. S., Ahn, J. W. and Jeong, S. W., 2010, Force Identification of a Rotary Compressor and Prediction of Vibration on a Pipe, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 10, pp. 953-959. https://doi.org/10.5050/KSNVE.2010.20.10.953

Cited by

  1. Analysis for the Effect of the Misalignment of the Power Line from the Displacement Caused by the Ship Motion of the Main Propulsion System vol.22, pp.1, 2012, https://doi.org/10.5050/KSNVE.2012.22.1.046
  2. Estimating the vibration displacement for the engine’s power transfer shaft by determining engine exciting force vol.27, pp.6, 2013, https://doi.org/10.1007/s12206-013-00424-0
  3. Design of the Base for the Onboard Installed Equipment to Minimize Structure-borne Noise vol.25, pp.6, 2015, https://doi.org/10.5050/KSNVE.2015.25.6.432
  4. Development of the Anti-vibration Base for the Onboard Equipment of the Naval Vessel Using Sandwitch Panel vol.26, pp.4, 2016, https://doi.org/10.5050/KSNVE.2016.26.4.365
  5. Naval-vessel on board equipment base to minimize structure-borne noise vol.30, pp.12, 2016, https://doi.org/10.1007/s12206-016-1104-7