Journal of electromagnetic engineering and science

The Korean Institute of Electromagnetic Engineering and Science (한국전자파학회)
권호 표지
DOI QR코드

DOI QR Code

Reduction of Electromagnetic Field from Wireless Power Transfer Using a Series-Parallel Resonance Circuit Topology

  • Kim, Jong-Hoon (Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Kim, Hong-Seok (Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Kim, In-Myoung (Future Energy Unit, ENERCONSTech. Co., Ltd.) ;
  • Kim, Young-Il (Future Energy Unit, ENERCONSTech. Co., Ltd.) ;
  • Ahn, Seung-Young (Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Kim, Ji-Seong (Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Kim, Joung-Ho (Department of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • Received : 2011.09.05
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we implemented and analyzed a wireless power transfer (WPT) system with a CSPR topology. CSPR refers to constant current source, series resonance circuit topology of a transmitting coil, parallel resonance circuit topology of a receiving coil, and pure resistive loading. The transmitting coil is coupled by a magnetic field to the receiving coil without wire. Although the electromotive force (emf) is small (about 4.5V), the voltage on load resistor is 148V, because a parallel resonance scheme was adopted for the receiving coil. The implemented WPT system is designed to be able to transfer up to 1 kW power and can operate a LED TV. Before the implementation, the EMF reduction mechanism based on the use of ferrite and a metal shield box was confirmed by an EM simulation and we found that the EMF can be suppressed dramatically by using this shield. The operating frequency of the implemented WPT system is 30.7kHz and the air gap between two coils is 150mm. The power transferred to the load resistor is 147W and the real power transfer efficiency is 66.4 %.

Keywords

References

  1. André Kurs, Aristeidis Karalis, Robert Moffatt, J. D. Joannopoulos, Peter Fisher, and Marin Soljac ic, "Wireless power transfer via strongly coupled magnetic resonances," Science, published online Jun. 2007.
  2. Seungyoung Ahn, Junso Pak, Taigon Song, Heejae Lee, Junggun Byun, Deogsoo Kang, Cheol-Seung Choi, Yangbae Chun, Chun taek Rim, Jae-Ha Yim, Dong-Ho Cho, and Joungho Kim, "Low frequency electromagnetic field reduction techniques for the on-line electric vehicle (OLEV)," IEEE Electromagnetic Compatibility Symposium, pp. 625-630, Jul. 2010. https://doi.org/10.1109/ISEMC.2010.5711349
  3. Gunyoung Kim, Youn-Kwon Jung, and Bomson Lee, "Wireless power transmission between two metamaterial- inspired loops at 300 MHz," Journal of the Korean Institute of Electromagnetic Engineering and Science, vol. 10, no. 4, pp. 219-223, Dec. 2010. https://doi.org/10.5515/JKIEES.2010.10.4.219
  4. Naoki Shinohara, "Beam efficiency of wireless power transmission via radio waves from short range to long range," Journal of the Korean Institute of Electromagnetic Engineering and Science, vol. 10, no. 4, pp. 224-230, Dec. 2010. https://doi.org/10.5515/JKIEES.2010.10.4.224
  5. ICNIRP Guidelines, "Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)", Health Physics, vol. 74, no. 4, pp. 494-522, 1998.

Cited by

  1. Field Analysis and Measurement of Antiparallel Resonant Loop for Wireless Charging vol.14, 2015, https://doi.org/10.1109/LAWP.2015.2411616
  2. A Resonant Reactive Shielding for Planar Wireless Power Transfer System in Smartphone Application vol.59, pp.2, 2017, https://doi.org/10.1109/TEMC.2016.2636863
  3. Design and Analysis of a Resonant Reactive Shield for a Wireless Power Electric Vehicle vol.62, pp.4, 2014, https://doi.org/10.1109/TMTT.2014.2305404