Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Friction Stir Spot Welding of Light Non Ferrous Metal for Automobile

자동차용 경량 비철 소재의 마찰교반점접합 기술 동향

  • 최돈현 (성균관대학교 신소재공학부) ;
  • 연윤모 (수원과학대학 신소재응용과) ;
  • 정승부 (성균관대학교 신소재공학부)
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 소재기술백서 2010
  2. 대한용접학회편 : 용접.접합편람, 대한용접학회 (1998) 256-257 (in Korean)
  3. 溶接學會編 : 溶接.接合便覽, 日本溶接學會 (1990) 1016-1017 (in Japanese)
  4. S.A. Lcokyer and M.J. Russell: Third International Symposium on Friction Stir Welding, September, (2001, 9), Kobe, Japan
  5. Y.M.Yeon, C.Y.Lee, W.B.Lee, S.B.Jung, W.S.Chang: Spot Friction Stir Welding and Characteristics of Joints in Aluminium Alloys, Journal of KWS, 23-3 (2005), 228-232 (in Korean)
  6. H.J.Cho, H.J.Kim, J.S.No, W.S.Chang, G.S.Bang:Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive, Proceedings of the 2005 Spring Annual Meeting of KWS, 44(2005), 177-179(in Korean)
  7. Y.M.Yeon, C.Y.Lee, W.B.Lee, S.B.Jung : Spot Friction Stir Welding of 5052Al Alloy, Proceedings of the 2005 Spring Annual Meeting of KWS, 44(2005), 235-237 (in Korean)
  8. A. Gerlich, P. SU, T. H. North: Tool penetration during friction stir spot welding of Al and Mg alloys, J. Mater. Sci., 40 (2005), 6473-6481
  9. D. Mitlin, V. Radmilovic, T. Panc, J. Chena, Z. Feng, M.L. Santella: Structure-properties relations in spot friction welded (also known as friction stir spot welded) 6111 aluminum, Mater. Sci. Eng. A, 441 (2006), 79-96 https://doi.org/10.1016/j.msea.2006.06.126
  10. Y. Tozaki, Y. Uematsum K. Tokaji: Effect of processing parameters on static strength of dissimilar friction stir spot welds between different aluminium alloys, Fatigue Fract. Engng. Mater. Struct., 30 (2007), 143-148 https://doi.org/10.1111/j.1460-2695.2006.01096.x
  11. P. Su, A. Gerlich, T.H. North, G.J. Bendzsak, Intermixing in Dissimilar Friction Stir Spot Welds, Metall. Mater. Trans. A, 38A (2007), 584-595
  12. D.A. Wang, S.C. Lee: Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets, J. Mater. Proc. Tech., 186 (2007), 297-297
  13. H. Badarinarayan, Q. Yang, S. Zhu: Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy, Int. J. Mach. Tool Manu., 49 (2009) 142-148 https://doi.org/10.1016/j.ijmachtools.2008.09.004
  14. D.H. Choi, B.W. Ahn, C.Y. Lee, Y.M. Yeon, K. Song, S.B. Jung: Effect of Pin Shapes on Joint Characteristics of Friction Stir Spot Welded AA5J32 Sheet, Mater. Trans., 51 (2010), 1028-1032 https://doi.org/10.2320/matertrans.M2009405
  15. H. Badarinarayan, Q.Yang, S.Zhu: Effect of tool geometry on static strength of friction stir spotwelded aluminum alloy, Int. J. Tools Manu., 49 (2009), 142-148 https://doi.org/10.1016/j.ijmachtools.2008.09.004
  16. M. Yamamoto, A. Gerlich, T.H. North, K. Shinozaki: Cracking in the stir zones of Mg-alloy friction stir spot welds, J. Mater. Sci., 42 (2007), 7657-7666 https://doi.org/10.1007/s10853-007-1662-2
  17. D.H. Choi, B.W. Ahn, C.Y. Lee, Y.M. Yeon, K. Song, S.B. Jung: Formation of intermetallic compounds in Al and Mg alloy interface during friction stir spot welding, Intermetallics, 19 (2011), 125-130 https://doi.org/10.1016/j.intermet.2010.08.030