Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Study of Reliability-Based Robust Design Optimization Using Conservative Approximate Meta-Models

보수적 근사모델을 적용한 신뢰성 기반 강건 최적설계 방법

  • Sim, Hyoung Min (Dep't of Mechanical Engineering, Graduate School, Yonsei University) ;
  • Song, Chang Yong (Dep't of Ocean Engineering, Mokpo National University) ;
  • Lee, Jongsoo (Dep't of Mechanical Engineering, Graduate School, Yonsei University) ;
  • Choi, Ha-Young (High-speed Railroad Systems Research Center, KRRI)
  • 심형민 (연세대학교 기계공학부) ;
  • 송창용 (목포대학교 해양시스템공학과) ;
  • 이종수 (연세대학교 기계공학부) ;
  • 최하영 (한국철도기술연구원 고속철도연구본부)
  • Received : 2012.10.15
  • Accepted : 2012.11.28
  • Published : 2012.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The methods of robust design optimization (RDO) and reliability-based robust design optimization (RBRDO) were implemented in the present study. RBRDO is an integrated method that accounts for the design robustness of an objective function and for the reliability of constraints. The objective function in RBRDO is expressed in terms of the mean and standard deviation of an original objective function. Thus, a multi-objective formulation is employed. The regressive approximate models are generated via the moving least squares method (MLSM) and constraint-feasible moving least squares method (CF-MLSM), which make it possible to realize the feasibility regardless of the multimodality/nonlinearity of the constraint function during the approximate optimization processes. The regression model based RBRDO is newly devised and its numerical characteristics are explored using the design of an actively controlled ten bar truss structure.

Keywords

References

  1. Arora. J., 2004. Introduction to optimum design. 2nd Edition, McGraw-Hill, New York.
  2. Breitkopf, P., Rassineux, A., Villon, P., 2002. An introduction to moving least squares meshfree methods. Revue Europenne des Elements Finis 11, 825-868. https://doi.org/10.3166/reef.11.825-867
  3. Buskensa. C., Maurer. H., 2000. SQP-methods for solving optimal control problems with control and state constraints: adjoint variables, sensitivity analysis and real-time control. Journal of Computational and Applied Mathematics, 120, 85-108. https://doi.org/10.1016/S0377-0427(00)00305-8
  4. Chun, H.Y., Min, S., 2005. Comparative Studies of Reliability- Based Topology Optimization. Proceedings of Fall Annual Meeting of KSME, 812-817.
  5. Joung, T.H., Nho, I.S., Lee, J.H., Han, S.H., 2005. Design Optimization of a Deep-sea Pressure Vessel by Reliability Analysis. Journal of Ocean Engineering and Technology, 19(2), 40-46.
  6. Lee, D.H., Min, S.J., Kim, S.D., 2003. Optimal Design of Rubble Mound Breakwater Used by Partial Safety Factor Method. Journal of Ocean Engineering and Technology, 17(6), 23-31.
  7. Lee, J., Hajela, P., 1997. GAs in Decomposition Based Design- Subsystem Interactions Through Immune Network Simulation. Structural Optimization, 14, 248-255. https://doi.org/10.1007/BF01197947
  8. Lee, K.H., Park, G.J., 2001. Robust Optimization Considering Tolerances of Design Variables. Computers and Structures, 79(1), 77-86. https://doi.org/10.1016/S0045-7949(00)00117-6
  9. Ryu, C.H., Lee, J.H., Yoon, J.S., 2007. An Algorithm on Determination of Process Parameters for Roller Bending of Curved Shell Plates. Journal of the Society of Naval Architects of Korea, 44(5), 517-525. https://doi.org/10.3744/SNAK.2007.44.5.517
  10. Sandgren, E., Cameron, T.M., 2002. Robust design optimization of structures through consideration of variation. Computers and Structures, 80, 1605-1613. https://doi.org/10.1016/S0045-7949(02)00160-8
  11. Song, C.Y., Lee J., 2009. Strength Design of Knuckle Component Using Moving Least Squares Methods. Proc. IMechE, Part D: Journal of Automobile Engineering, 223(8), 1019- 1032. https://doi.org/10.1243/09544070JAUTO1163
  12. Song, C.Y., Lee J., Choung, J., 2011. Reliability-based design optimization of an FPSO riser support using moving least squares response surface meta-models. Ocean Engineering, 38, 304-318. https://doi.org/10.1016/j.oceaneng.2010.11.001
  13. Tu, J., Choi, K.K., Park, Y.H., 1999. A new study on reliability- based design optimization. Journal of Mechanical Design, 121(4), 557-564. https://doi.org/10.1115/1.2829499
  14. Youn, B.D., Choi, K.K., 2004. A new response surface methodology for reliability-based design optimization. Computers and Structures, 82(2), 241-256. https://doi.org/10.1016/j.compstruc.2003.09.002

Cited by

  1. Role of multi-response principal component analysis in reliability-based robust design optimization: an application to commercial vehicle design vol.58, pp.2, 2018, https://doi.org/10.1007/s00158-018-1908-4