DOI QR코드

DOI QR Code

Development and Performance Evaluation for 1.6MW Gas Engine

1.6MW급 가스엔진의 개발 및 엔진성능평가

  • 노기철 (STX종합기술원 연소성능팀) ;
  • 설동일 (STX종합기술원 연소성능팀) ;
  • 허경미 (STX종합기술원 연소성능팀) ;
  • 김세훈 (STX종합기술원 연소성능팀)
  • Received : 2011.11.08
  • Accepted : 2012.01.19
  • Published : 2012.03.31

Abstract

Engine makers are lately interested in the gas engine development as the alternative for diesel engine in order to cope the rise of oil price and the environmental regulation. So, STX has developed the 1.6MW gas engine which was converted from 22HLX diesel engine. The gas engine developed with precombustion chamber, which has good performance of 21bar BMEP at engine speed 1000rpm and low $NO_X$ emission of 50ppm at 15% oxygen composition, has been developed recently. Especially, it has a good thermal efficiency of 45% and a reduction efficiency of green house gas($CO_2$) emission of 25% than a conventional diesel engine.

최근 엔진 메이커들은 원유가 인상 및 대기환경 규제에 대응하기 위하여 디젤엔진의 대안으로서 가스엔진 개발에 대한 관심이 증가되고 있다. 이에 STX는 22HLX 디젤엔진을 기초로 한 1.6MW급 가스엔진을 개발하였다. 예연소실 방식의 개발된 가스엔진은 엔진속도가 1000rpm에서 제동평균유효압력이 21bar이고 질소산화물 배출량이 50ppm(공기 중 산소함유 15% 기준)의 우수한 성능을 가진다. 특히 열효율 45%의 우수한 연료 경제성을 가지며 이산화탄소 배출량은 디젤엔진의 약 75%수준으로 온실가스 저감에도 효과적이다.

Keywords

References

  1. K. Okamoto, T. Takemoto and Daichi M. "Devlopment of A 350kW high-efficiency (over43%) lean burn gas engine for co-generation system", CIMAC 2004, Paper no. 98, 2004.
  2. Kengo Tanaka, Hiromi Shimoda and Goda Yasunori, "Development of the lean burn miller cycle gas engine", CIMAC 2004, Paper no. 199, 2004.
  3. S. G. Dexter and C. Ennemoser, "Fire not misfire in pre-chamber gas engines", CIMAC 1995, D45, 1995.
  4. Gunther R. H. and Friedrich Gruber, "The new high efficiency 1.5MW engine of Jenbacher AG. high efficiency concept-HEC", CIMAC 2001, pp. 966-975, 2001.
  5. Toru Takemoto, Kazuo Nishida and Satoshi S. Morimoto "Development of high efficiency gas engine improvement of knocking limit by optimized engine system", CIMAC 2004, Paper No. 36, 2004.
  6. Guenther R. H. and Friedrich Gruber, "Miller cycle-efficiency potentials for gas engines", CIMAC 2004, Paper no. 197, 2004.
  7. M. Kondo and A. Sakane, "Development of the 1,000kW-class gas engine(MD20G)", CIMAC 2007, Paper no. 135, 2007.
  8. K. Dean Edwards, Robert M. Wagner and C. Stuart Daw, "Adaptive control for extending the effective lean limit in a spark-ignition engine model", CIMAC 2004, Paper no. 253, 2004.

Cited by

  1. Performance Analysis of GT/ST Hybrid System for Marine Power Applications(under Conditions of Air-Cooled Gas Turbine) vol.36, pp.5, 2012, https://doi.org/10.5916/jkosme.2012.36.5.586
  2. Evaluation on a Miller Cam for Improving the Fuel Consumption of a Large Diesel Engine vol.24, pp.1, 2016, https://doi.org/10.7467/KSAE.2016.24.1.047
  3. 상용 소프트웨어를 이용한 스파크 점화 기관의 시뮬레이션에 관한 연구 vol.40, pp.9, 2012, https://doi.org/10.5916/jkosme.2016.40.9.733