Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Thermal buckling analysis of shear deformable laminated orthotropic plates by differential quadrature

  • Received : 2010.08.06
  • Accepted : 2011.11.16
  • Published : 2012.02.25
⟨ Previous Next ⟩

Abstract

In this paper, the thermal buckling analysis of rectangular composite laminated plates is investigated using the Differential Quadrature (DQ) method. The composite plate is subjected to a uniform temperature distribution and arbitrary boundary conditions. The analysis takes place in two stages. First, pre-buckling forces due to a temperature rise are determined by using a membrane solution. In the second stage, the critical temperature is predicted based on the first-order shear deformation theory. To verify the accuracy of the method, several case studies were used and the numerical results were compared with those of other published literatures. Moreover, the effects of several parameters such as aspect ratio, fiber orientation, modulus ratio, and various boundary conditions on the critical temperature were examined. The results confirm the efficiency and accuracy of the DQ method in dealing with this class of engineering problems.

Keywords

References

  1. Bellman, R. and Casti, J. (1971), "Differential quadrature and long-term integration", J. Math. Anal. Appl. 10, 235-238.
  2. Bert, C.W. and Malik, M., (1996), "Differential quadrature method in computational mechanics: A review", Appl. Mech. Rev., 49(1), 1-28. https://doi.org/10.1115/1.3101882
  3. Chen, W.J., Lin, P.D. and Chen, L.W. (1991), "Thermal buckling behavior of thick composite laminated plates under nonuniform temperature distribution", Comput. Struct, 41(4), 637-645. https://doi.org/10.1016/0045-7949(91)90176-M
  4. Chia, C.Y. (1980), Nonlinear analysis of plates, McGraw-Hill, New York.
  5. Dawe, D.J. and Ge, Y.S. (2000), "Thermal buckling of shear-deformable composite laminated plates by the spline finite strip method", Comput. Method. Appl. Mech. Eng., 185(2-4), 347-366. https://doi.org/10.1016/S0045-7825(99)00266-2
  6. Farid, M., Zahedinejad, P. and Malekzadeh, P. (2010), "Three-dimensional temperature dependent free vibration analysis of functionally graded material curved panels resting on two-parameter elastic foundation using a hybrid semi-analytic, differential quadrature method", Mater. Design, 31(1), 2-13. https://doi.org/10.1016/j.matdes.2009.07.025
  7. Hakimi, H. and Moradi, S. (2010), "Drillstring vibration analysis using differential quadrature method", J.PETROL. SCI. ENG, 70(3-4), 235-242. https://doi.org/10.1016/j.petrol.2009.11.016
  8. Hong, C.C. and Jane, K.C. (2003), "Shear deformation in thermal bending analysis of laminated plates by the GDQ method", Mech. Res. Commun., 30(2), 175-186. https://doi.org/10.1016/S0093-6413(02)00356-7
  9. Hu, Y.J., Zhu, Y.Y. and Cheng, C.J. (2009), "DQM for dynamic response of fluid-saturated visco-elastic porous media", Inter. J. Solid. Struct., 46(7-8), 1667-1675. https://doi.org/10.1016/j.ijsolstr.2008.12.006
  10. Huang, N.N. and Tauchert, T.R. (1992), "Thermal buckling of clamped symmetric laminated plates", J. Thin-Wall. Struct., 13(4), 259-273. https://doi.org/10.1016/0263-8231(92)90024-Q
  11. Jane, K.C. and Hong, C.C. (2000), "Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method", Mech. Res. Commun., 27(2), 157-164. https://doi.org/10.1016/S0093-6413(00)00076-8
  12. Kabir, H.R.H., Hamad, M.A.M., Al-Duaij, J. and John, M.J. (2007), "Thermal buckling response of all-edge clamped rectangular plates with symmetric angle-ply lamination". Compos. Struct., 79(1), 148-155. https://doi.org/10.1016/j.compstruct.2005.11.059
  13. Kant, T. and Babu, C.S., (2000),"Thermal buckling analysis of skew fiber-reinforced composite and sandwich plates using shear deformable finite element models", Compos. Struct, 49(1),77-85. https://doi.org/10.1016/S0263-8223(99)00127-0
  14. Karami, G. and Malekzadeh, P., (2006), "DQM free vibration analysis of moderately thick symmetric laminated plates with elastically restrained edges", Compos. Struct., 74(1), 415-442
  15. Leissa, A.W. (1986), "Conditions for laminated plates to remain flat under inplane loading", Compos. Struct, 6(4), 261-270. https://doi.org/10.1016/0263-8223(86)90022-X
  16. Li, J.J. and Cheng, C.J. (2005), "Differential quadrature method for nonlinear vibration of orthotropic plates with finite deformation and transverse shear effect", J. Sound. Vib., 281(1-2), 295-305. https://doi.org/10.1016/j.jsv.2004.01.016
  17. Lin, R.M., Lim, M.K. and Du, H. (1994), "Large deflection analysis of plates under thermal loading", Comput. Meth. Appl. Mech. Eng., 117(3-4), 381-390. https://doi.org/10.1016/0045-7825(94)90124-4
  18. Matsunaga, H. (2006), "Thermal buckling of angle-ply laminated composite and sandwich plates according to a global higher-order deformation theory", Compos. Struct., 72(2), 177-192. https://doi.org/10.1016/j.compstruct.2004.11.016
  19. Matsunaga, H. (2007), "Thermal buckling of cross-ply laminated composite shallow shells according to a global higher-order deformation theory", Compos. Struct, 81(2), 210-221. https://doi.org/10.1016/j.compstruct.2006.08.008
  20. Prabhu, M.R. and Dhanaraj, R. (1994), "Thermal buckling of laminated composite plates", Comput. Struct, 53(5), 1193-1204. https://doi.org/10.1016/0045-7949(94)90166-X
  21. Prakash, T., Singh, M.K. and Ganapathi, M. (2006), "Vibrations and thermal stability of functionally graded spherical caps", Struct. Eng. Mech, 24(4), 447-462. https://doi.org/10.12989/sem.2006.24.4.447
  22. Qatu, M.S. and Leissa, A.W. (1993), "Buckling or transverse deflections of unsymmetrically laminated plates subjected to in-plane loads", AIAA Journal, 31(1), 189-194. https://doi.org/10.2514/3.11336
  23. Shariyat, M. (2007), "Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory", Thin-Wall. Struct., 45(4), 439-452. https://doi.org/10.1016/j.tws.2007.03.004
  24. Shiau, L.C, Kuo, S.Y. and Chen, C.Y. (2010), "Thermal buckling behavior of composite laminated plates", Compos. Struct, 92(2), 508-514. https://doi.org/10.1016/j.compstruct.2009.08.035
  25. Shu, C. and Richards, B.E., (1992), "Application of generalized differential quadrature to solve two-dimensional incompressible Navier-Stokes equations", Int. J. Numer. Meth. Fluids, 15(7), 791-798. https://doi.org/10.1002/fld.1650150704
  26. Sun, L.X. and Hsu, T.R. (1990), "Thermal buckling of laminated composite plates with transverse shear deformation", Compu. Struct, 36(5), 883-889. https://doi.org/10.1016/0045-7949(90)90159-Y
  27. Thangaratnam, K.R., Palaninathan, J. and Ramachandran, J. (1989), "Thermal buckling of composite laminated plates", Comput. Struct, 32(5), 1117-1124. https://doi.org/10.1016/0045-7949(89)90413-6
  28. Whitney, J.M. (1987), Structural analysis of laminated anisotropic plates, Technomic, Lancaster, USA.

Cited by

  1. An analytical solution for bending, buckling and vibration responses of FGM sandwich plates 2017, https://doi.org/10.1177/1099636217698443
  2. Dynamic stability analysis of laminated composite plates in thermal environments vol.15, pp.1, 2013, https://doi.org/10.12989/scs.2013.15.1.57
  3. A NEW SIMPLE HYPERBOLIC SHEAR DEFORMATION THEORY FOR FUNCTIONALLY GRADED PLATES RESTING ON WINKLER–PASTERNAK ELASTIC FOUNDATIONS vol.11, pp.06, 2014, https://doi.org/10.1142/S0219876213500989
  4. A novel first-order shear deformation theory for laminated composite plates vol.17, pp.3, 2014, https://doi.org/10.12989/scs.2014.17.3.321
  5. Effects of thickness stretching in FGM plates using a quasi-3D higher order shear deformation theory vol.5, pp.4, 2016, https://doi.org/10.12989/amr.2016.5.4.223
  6. Thermal buckling predictions of three types of high-order theories for the heterogeneous orthotropic plates, using the new version of DQM vol.113, 2014, https://doi.org/10.1016/j.compstruct.2014.02.032
  7. Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory vol.57, pp.4, 2016, https://doi.org/10.12989/sem.2016.57.4.617
  8. A trigonometric four variable plate theory for free vibration of rectangular composite plates with patch mass vol.17, pp.1, 2014, https://doi.org/10.12989/scs.2014.17.1.069
  9. Higher order flutter analysis of doubly curved sandwich panels with variable thickness under aerothermoelastic loading vol.60, pp.1, 2016, https://doi.org/10.12989/sem.2016.60.1.001
  10. Differential quadrature thermal buckling analysis of general quadrilateral orthotropic auxetic FGM plates on elastic foundations vol.112, 2017, https://doi.org/10.1016/j.tws.2016.12.018
  11. An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates vol.60, 2014, https://doi.org/10.1016/j.compositesb.2013.12.057
  12. Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory vol.18, pp.4, 2016, https://doi.org/10.12989/sss.2016.18.4.755
  13. 均匀热载荷和机械载荷共同作用下具有温度依赖材料特性的层合梁的弹性力学解 vol.25, pp.10, 2018, https://doi.org/10.1007/s11771-018-3934-1
  14. Investigation of thermal buckling properties of ceramic-metal FGM sandwich plates using 2D integral plate model vol.33, pp.6, 2012, https://doi.org/10.12989/scs.2019.33.6.805
  15. Wave propagation of FG polymer composite nanoplates reinforced with GNPs vol.37, pp.1, 2012, https://doi.org/10.12989/scs.2020.37.1.027