DOI QR코드

DOI QR Code

Experimental studies of circular composite bridge piers for seismic loading

  • Chen, Sheng-Jin (National Taiwan University of Science and Technology, Department of Construction Engineering) ;
  • Yang, Kuo-Chen (National Kaohsiung First University of Science and Technology, Department of Construction Engineering) ;
  • Lin, K.M. (National Taiwan University of Science and Technology, Department of Construction Engineering) ;
  • Wang, C.C. (National Taiwan University of Science and Technology, Department of Construction Engineering)
  • Received : 2011.03.18
  • Accepted : 2012.01.13
  • Published : 2012.03.25

Abstract

This study proposes and examines a circular composite bridge pier for seismic resistance. The axial and flexural strengths of the proposed bridge pier are provided by the longitudinal reinforcing bars and the concrete, while the transverse reinforcements used in the conventional reinforced concrete pier are replaced by the steel tube. The shear strength of this composite pier relies on the steel tube and the concrete. This system is similar to the steel jacketing method which strengthens the existing reinforced concrete bridge piers. However, no transverse shear reinforcing bar is used in the proposed composite bridge pier. A series of experimental studies is conducted to investigate the seismic resistant characteristics of the proposed circular composite pier. The effects of the longitudinal reinforcing bars, the shear span-to-diameter ratio, and the thickness of the steel tube on the performance of strength, ductility, and energy dissipation of the proposed pier are discussed. The experimental results show that the strength of the proposed circular composite bridge pier can be predicted accurately by the similar method used in the reinforced concrete piers with minor modification. From these experimental studies, it is found that the proposed circular composite bridge pier not only simplifies the construction work greatly but also provides excellent ductility and energy dissipation capacity under seismic lateral force.

Keywords

Acknowledgement

Supported by : National Science Council of Taiwan

References

  1. AASHTO, (2008), Standard Specifications for Highway Bridges-LRFD. fourth edition, American Association of State Highway and Transportation Officials, Washington, D.C.
  2. Aboutaha, R.S. (1999a), "Rehabilitation of shear critical concrete columns by use of rectangular steel jackets", ACI Struct. J., 96(1), 68-78.
  3. Aboutaha, R.S. (1999b), "Seismic resistance of steel-tubed high-strength reinforced-concrete columns", J. Struct. Engrg., ASCE, 125(5), 485-494. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(485)
  4. ACI Committee 318 (2008), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Michigan.
  5. American Institute of Steel Construction, AISC (2005), Specification for Structural Steel Buildings, Chicago, IL.
  6. Applied Tech. Council, ATC (1996), Improved Seismic Design Criteria for California Bridges: Provisional Recommendations.ATC-32, Applied Tech. Council, Berkeley, Calif.
  7. Chai, Y.H, Priestley, M.J.N. and Seible, F. (1991), "Seismic retrofit of circular bridge columns for enhanced flexural moments", ACI Struc. J., 88(5), 572-584.
  8. Chen S.J., Yang K.C., Lin K.M. and Wang C.D. (2011), "Seismic behavior of ductile rectangular composite bridgepiers", Earthquake Engng Struct. Dyns., 40(1), 21-34. https://doi.org/10.1002/eqe.1018
  9. Ellobody, E., Young, B. and Lam, D. (2006), "Behaviour of normal and high strength concrete-filled compact steel tube circular stub columns", J. Constr. steel Res., 62(7), 706-715. https://doi.org/10.1016/j.jcsr.2005.11.002
  10. FHWA, (1995), Seismic Retrofitting Manual for Highway Bridges, FHWA-RD-94-052.
  11. Ghee, A.B., Priestley, M.J.N. and Paulay, T. (1989), "Seismic shear strength of circular reinforced concrete", ACI Struct. J., 45-59.
  12. Gupta, P.K., Sarda, S.M. and Jumar, M.S. (2007), "Experimental and computational study of concrete filled steel tubular columns under axial loads", J. Constr. steel Res., 65(2), 182-193.
  13. Hoshikuma, J., Kawashima, K. and Taylor, A.W. (1997), "Stress-strain model for confined reinforced concrete in bridge piers", J. Struct. Engrg., ASCE, 123(5), 624-633. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(624)
  14. Mander, J.B., Priestley, M.J.N. and Park, R. (1988a), "Observed stress-strain behavior of confined concrete", J. Struct. Engrg., ASCE, 114(8), 1827-1849. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1827)
  15. Mander, J.B., Priestley, M.J.N. and Park, R. (1988b), "Theoretical stress-strain model for confined concrete" J. Struct. Engrg., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  16. Chitawadagi M .V. and Narasimhan M .C. (2009), "Strength deformation behavior of circular concrete filled steel tubes subjected to pure bending", J. Constr. steel Res, 65(8-9), 1836-1845. https://doi.org/10.1016/j.jcsr.2009.04.006
  17. Lee E.T., Yun B.H., Shim H.I., Chang K.H. and Lee G.C. (2009), "Torsional behavior of concrete-filled circular steel tube columns", J. Struct. Engrg., ASCE, 135(10), 1250-1259. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:10(1250)
  18. Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Engrg., ASCE, 108(4), 929-950.
  19. Priestley, M.J.N., Seible, F., Xiao, Y. and Verma, R. (1994a), "Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength-Part 1: Theoretical considerations and test design", ACI Struct. J. 91(4), 394-405.
  20. Priestley, M.J.N., Seible, F., Xiao, Y. and Verma, R. (1994b), "Steel jacket retrofitting of reinforced concrete bridgecolumns for enhanced shear strength-Part 2: Test results and comparison with theory", ACI Struct. J. 91(5), 537-551.
  21. Priestley, M.J.N., Verma, R. and Xiao, Y. (1994c), "Seismic shear strength of reinforced concrete columns", J. Struct. Engrg., ASCE, 120(8), 2310-2329. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310)
  22. Roeder C.W., Lehman E.E. and Bishop E. (2010), "Strength and stiffness of circular concrete-filled tubes", J. Struct. Engrg., ASCE, 136(12), 1545-1554. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000263
  23. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Engrg., ASCE, 108(12), 2703-2722.

Cited by

  1. Shear Transfer Capacity of Composite Sections in Steel Tubed-Reinforced-Concrete Frames vol.12, 2017, https://doi.org/10.1016/j.istruc.2017.08.001
  2. Experimental study on seismic performance of partial penetration welded steel beam-column connections with different fillet radii vol.17, pp.6, 2014, https://doi.org/10.12989/scs.2014.17.6.851
  3. Cyclic shear behavior and shear strength of steel tubed-reinforced-concrete short columns vol.21, pp.11, 2018, https://doi.org/10.1177/1369433218754544
  4. Experimental Behavior of Square Tubed-Reinforced-Concrete Column to RC Beam Joints with Internal Diaphragms under Cyclic Loading vol.763, pp.1662-9795, 2018, https://doi.org/10.4028/www.scientific.net/KEM.763.779
  5. Connections between RC beam and square tubed-RC column under axial compression: Experiments vol.23, pp.4, 2017, https://doi.org/10.12989/scs.2017.23.4.453