Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Maximum Torque Control of an IPMSM Drive Using an Adaptive Learning Fuzzy-Neural Network

  • Ko, Jae-Sub (Dept. of Electrical Control Eng., Sunchon National University) ;
  • Choi, Jung-Sik (Korea Electronics Technology Institute) ;
  • Chung, Dong-Hwa (Dept. of Electrical Control Eng., Sunchon National University)
  • Received : 2010.05.24
  • Published : 2012.05.20
Download PDF
⟨ Previous Next ⟩

Abstract

The interior permanent magnet synchronous motor (IPMSM) has been widely used in electric vehicle applications due to its excellent power to weigh ratio. This paper proposes the maximum torque control of an IPMSM drive using an adaptive learning (AL) fuzzy neural network (FNN) and an artificial neural network (ANN). This control method is applicable over the entire speed range while taking into consideration the limits of the inverter's rated current and voltage. This maximum torque control is an executed control through an optimal d-axis current that is calculated according to the operating conditions. This paper proposes a novel technique for the high performance speed control of an IPMSM using AL-FNN and ANN. The AL-FNN is a control algorithm that is a combination of adaptive control and a FNN. This control algorithm has a powerful numerical processing capability and a high adaptability. In addition, this paper proposes the speed control of an IPMSM using an AL-FNN, the estimation of speed using an ANN and a maximum torque control using the optimal d-axis current according to the operating conditions. The proposed control algorithm is applied to an IPMSM drive system. This paper demonstrates the validity of the proposed algorithms through result analysis based on experiments under various operating conditions.

Keywords

References

  1. C. K. Lin, T. H. Liu, and C. H. Lo, "High performance sensorless IPMSM drive with a wide adjustable speed range," IECON 2008. 34th Annual Conference of IEEE, pp. 1222-1227, 2008.
  2. M. N. Uddin, "Comparative analysis of intelligent controllers for high performance interior permanent magnet synchronous motor drive systems," 2003 Large Engineering Systems Conference on Power Engineering, pp. 50-54, 2003.
  3. Mona N. Eskander, "Minimization of losses in permanent magnet synchronous motors using neural network," Journal of Power Electronic, Vol. 2, No. 3, pp 220-229, Jul. 2002.
  4. B. K. Bose and P. M. Szczesny, "A microcomputer-based control and simulation of an advanced IPM synchronous machines drive system for electric vehicle propulsion," IEEE Trans. Ind Electron., Vol. 35, No. 4, pp. 547-559, Nov. 1988. https://doi.org/10.1109/41.9178
  5. T. M. Jahns, "Flux weakening regime operation of an interior permanent magnet synchronous motor drive," IEEE Trans. Ind. Appl., Vol. 23, No. 4, pp. 681-689, Jul. 1987. https://doi.org/10.1109/TIA.1987.4504966
  6. S. R. Macmin and T. M. Jahns, "Control technique for interior high speed performance of interior PM synchronous motor drives," IEEE Trans. Ind. Appl., Vol. 27, No. 5, pp. 997-1004, Sep./Oct. 1991. https://doi.org/10.1109/28.90358
  7. B. K. Bose, "A high performance inverter-fed drive system of an interior permanent magnet synchronous machines," IEEE Trans. Ind. Appl., Vol. 24, pp. 142-150, 1988. https://doi.org/10.1109/28.87265
  8. S. R. MacMinn and T. M. Jahns, "Control techniques for improved high performance of interior PM synchronous motor drives," IEEE Trans. Ind. Appl., Vol. 27, pp. 997-1004, Sep./Oct. 1991. https://doi.org/10.1109/28.90358
  9. S. Morimoto, M. Sanada, and Y. Taketa, "Wide speed operation of interior permanent magnet synchronous motors with high performance current regulator," IEEE Trans. Ind. Appl., Vol. 30, pp. 920-926, Jul./Aug. 1994. https://doi.org/10.1109/28.297908
  10. J. M. Kim and S.-K. Sul, "Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation," IEEE Trans. Ind. Appl., vol. 33, No. 1, pp. 43-48, Jan./Feb. 1997. https://doi.org/10.1109/28.567075
  11. J. S. Ko, J. S. Choi, K. T. Park, B. S. Park, and D. H. Chung, "Development of HBPI controller for high performance control of IPMSM drive," ICPE'07, pp. 368-372, 2007.
  12. J. S. Choi, J. S. Ko, J. H. Lee, and D. H. Chung, "Speed control of IPMSM drive using neural network PI controller," CEE'06, pp. 102, 2006.
  13. J. S. Choi, J. S. Ko, J. H. Lee, and D. H. Chung, "Maximum torque control of IPMSM drive with ALC-FNN controller," ICEE'06, pp. 101, 2006.
  14. J. S. Ko, J. S. Choi, J. H. Lee, and D. H. Chung, "Maximum torque control of IPMSM drive with hybrid artificial intelligent controller," Proceeding of ICMATE'06, Session B1, pp. 177-182, 2006.
  15. H. G. Lee, S. M. Nam, J. S. Ko, J. S. Choi, J. C. Lee, and D. H. Chung, "The speed control and estimation of IPMSM using adaptive FNN and ANN," ICCAS 2005, p. 134, 2005.
  16. D. H. Chung, et al., "Speed sensorless control of IPMSM drive with ANN," KIEE Trans., Vol. 52P, No. 4, pp. 154-160, 2003.

Cited by

  1. Torque-Angle-Based Direct Torque Control for Interior Permanent-Magnet Synchronous Motor Drivers in Electric Vehicles vol.13, pp.6, 2013, https://doi.org/10.6113/JPE.2013.13.6.964
  2. MTPA control of mechanical sensorless IPMSM based on adaptive nonlinear control vol.61, 2016, https://doi.org/10.1016/j.isatra.2016.01.004
  3. Synchronization control strategy in multi-layer and multi-axis systems based on the combine cross coupling error vol.9, pp.6, 2017, https://doi.org/10.1177/1687814017711392
  4. A PMSM Driven Electric Scooter System with a V-Belt Continuously Variable Transmission Using a Novel Hybrid Modified Recurrent Legendre Neural Network Control vol.14, pp.5, 2014, https://doi.org/10.6113/JPE.2014.14.5.1008
  5. Loss Minimizing Vector Control of Interior Permanent Magnet Synchronous Motor vol.20, pp.4, 2015, https://doi.org/10.6113/TKPE.2015.20.4.330
  6. Permanent Magnet Brushless DC Motor and Mechanical Structure Design for the Electric Impact Wrench System vol.11, pp.6, 2018, https://doi.org/10.3390/en11061360