Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Development of Vane Damper for Industry Flow Control Fan

산업용 유량제어 송풍기 베인댐퍼 개발에 관한 연구

  • 이중섭 (경상대학교 BK21(첨단기계항공)) ;
  • 정인국 (경상대학교 대학원) ;
  • 윤지훈 (경상대학교 대학원) ;
  • 서정세 (경상대학교 기계공학부, 공학연구원(ERI)) ;
  • 장성철 (한국항공폴리텍대학 항공메카트로닉스과)
  • Received : 2011.07.12
  • Accepted : 2011.08.02
  • Published : 2012.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, it was conducted to design each components of vane damper for industrial flow control fan and the flow rates were analysed by experimental and numerical method. Through environmental test, it could be confirmed that the designed vane damper was appropriate. Also, almost identical results with test could be drawn from numerical method. Finally, flow rates of electric and pneumatic actuator were measured by test. As the results, difference of flow rate according to opening ratio was smaller in pneumatic actuator than that in electric actuator.

Keywords

References

  1. Jang, S. C., Cho, H. D., and Kim, N. K., 2007, "Development of Gear Type Vane Damper Change Link Type in FD Fan," KSMTE, Vol. 13, No. 1, pp. 104-109.
  2. Jang, S. C., Han, S. H., and Kim, J. W., 2010, "A Study on Performance Improvement of Gear Type Vane Damper in FD Fan(Productivity Increases & Construction Improvement)," J. of the KSMTE, Vol. 19, No. 1, pp. 134-139.
  3. Yi, C. S., Hong, J. K., Suh, J. S., Shin, Y. I., and Park, Y. S., 2009, "Effect of Cutoff Angle on the Flow Characteristic of Turbo-Fan," Conference Proceedings of KSME Spring Annual Meeting, pp. 311-318.
  4. Maeng, J. S., Yoon, J, Y., Ahn, T, J., Yoon, J, E., and Hahn, D, J., 1999, "An Experimental Study for Flow Characteristics Inside the Rotor of a Multi Blade Fan/Scroll System," Trans. of the KSME(B), Vol. 23, No. 5, pp. 646-652.
  5. Kim, C. H, Ahn, H. S., and Chong T. H., 2003, "On a Method for the Durability Enhancement of Plastic Spur Gear using Finite Element Analysis," Transactions of the KSME(A), Vol. 27, No. 2, pp. 223-230.
  6. Witt, P. J., Solnordal, C. G., Mittoni, L. J., Finn, S., and Pluta, J., 2006, "Optimising the Design of Fume Extraction Hoods Using a Combination of Engineering and CFD Modelling," Applied Mathematical Modelling, Vol. 30, No. 11, pp. 1167-1179. https://doi.org/10.1016/j.apm.2006.02.003
  7. KS, 2006, Testing Methods for Industrial Fans, KS B 6311, KSSN, Korea.