Abstract
For the application TBM tunneling method, Both tunnel design standard and case study designed & constructed in domestic and foreign have been conducted. According to the study, the number of lane and inner shape (single or duplex) vary depending on the volume of traffic. Also extra space located in the top and bottom of tunnel is used for a multipurpose such as ventilation, disaster prevention, maintenance and administration. To find area ratio according to the components of road TBM tunnel, a standard section was considered as a two-lane road. Then, the analysis of area ratio of this section which consists of components for clearance, extra space in upper and lower tunnel was carried on two widths of shoulder. In addition, after a structural analysis, a thickness requirement of lower slab which is essential for road tunnel was derived on a few supporting types. Through correlation analysis, the ranges of available cross-sectional area between slab thickness and lower extra space of the tunnel was presented.
TBM 공법 적용을 위한 도로터널 단면의 국내 외 설계사례와 시공사례 및 터널단면 설계기준을 조사 분석하였다. 교통량에 따라 차로수의 규모 및 내부형상(단층 혹은 복층)이 상이하였고, 상 하부의 여유공간은 환기, 방재시설 및 유지관리 공간 등으로 다양하게 활용하고 있음을 확인하였다. TBM도로터널의 구성요소별 면적비를 확인하기 위하여 2차로 규모의 표준단면을 가정하고, 길어깨 폭원변화에 따른 내공단면 구성요소(시설한계 수용공간, 상부여유공간, 하부여유공간)의 단면적비를 분석하였다. 아울러 도로터널에 필수적으로 설치되는 차도 슬래브의 지지형식별 소요두께를 구조해석을 통하여 산정하였고, 산정된 벽체 및 슬래브 두께와 하부 여유공간의 상관관계를 분석하여 유효단면적 범위를 제시하였다.
