Journal of the Korean Society of Mineral and Energy Resources Engineers (한국자원공학회지)

The Korean Society of Mineral and Energy Resources Engineers (한국자원공학회)
권호 표지

Application of Water Jet Technology to Industry-Current State, Research Trend and Prospect

워터젯 기술의 산업응용에 관한 연구동향 및 전망

  • Lee, Chung-In (ReSEAT Program, Korea Institute of Science and Technology Information)
  • 이정인 (한국과학기술정보원 ReSEAT 프로그램)
  • Published : 2012.04.30
⟨ Previous Next ⟩

Abstract

In this paper current state, R&D trend, and future prospect of water jet technology are reviewed in both foreign and domestic industries. The current state of water jet technology which includs the application fields according to their pressure ranges, cutting principle and classification of water jet, connections between jet flow structure and the processing characteristics, and the development of high-pressure pumps is briefly introduced. R&D trends and future prospects are reviewed based on an analysis of papers published at the international conferences and symposiums. The development of domestic water jet technology, the current state of industrial applications and upcoming related prospects are also reviewed, classifying them according to the two main uses of cleaning and cutting. 619 water jet systems in total that currently used in Korea are investigated statistically and classified by their industrial field and equipment specifications. As a result of the investigation domestic manufacturing technology and R&D activities significantly fall behind advanced foreign countries, and strategic measures and R&D fund supply in theses fields are demanding.

최근 에너지 자원, 소재가공, 건설, 자동차, 석유화학, 반도체 등 거의 모든 산업분야에 광범위하게 이용되고 있는 워터젯 기술에 대하여 국내 외 기술개발 현황 및 연구동향을 분석하고 그 장래를 전망하였다. 선진국을 중심으로한 국외동향에서는 주요 산업 분야별 워터젯 기술의 이용 현황과 이용되고 있는 분사 압력의 범위, 워터젯의 가공원리와 분류, 워터젯 분사류 구조와 가공특성과의 관계, 워터제트의 고압발생장치의 발전 등 워터젯 기술의 발전 현황을 소개하고 현재까지 국제학회에 발표된 워터젯 관련 연구논문을 분석 한 자료를 기초로 연구개발 동향과 장래 전망을 기술 하였다. 한편 국내 기술 동향에서는 워터젯 장비 제조업체와 총 619세트의 워터젯 장비를 사용하는 업계의 산업별 조사 통계와 기술현황, 연구동향을 조사하였다. 그 결과 워터젯 응용기술은 이 기술이 갖고 있는 장점인 컴퓨터에 의한 자동화, 원격제어가 가능 한 로봇화의 용이성과 환경 친화성 등으로 선진외국에서는 기술개발과 연구가 비교적 활발한데 비하여 국내 장비제조 및 기술개발 연구는 대단히 취약하여 이에 대한 대책과 지원이 시급하다.

Keywords

References

  1. 김정규, 송재준, 여창현, 권영철, 2010, "고압 워터젯에 의한 콘크리트의 표면 절삭 효율에 관한 실험 연구," 한국지구시스템공학회지, 제47권 1호, pp. 81-90.
  2. 여창현, 김정규, 송재준, 2007, "워터젯을 이용한 콘크리트 절삭시 발생하는 폐수의 pH 농도 중화에 관한 연구," 한국지구시스템공학회지, 제44권 4호, pp. 1-8.
  3. Bortolussi, Ciccu and Kim, 1996, "Granite slotting with waterjet : An experimental study, Proceeding of the Korea- Japan joint Symposium on Rock Engineering," the Korean Institute of Mineral and Energy Resources Engineers, Seoul, Korea, July 18-20, pp. 503-508.
  4. Han, S.S., 1996, "High pressure percussive water jet and its application on rock cutting," pp. 481-486.
  5. Han, S.S., Seo, H.Y. and Lee, C.I., 2002, "Development of Abrasive Suspension Jet Drilling Prototype," 2002 Korea-Japan Joint Seminar on Water Jet Technology, Seoul(Korea), pp. 27-32.
  6. Han, S.S., 2003, "Disc cutting in granite and concrete with abrasive suspension jet," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song (Eds), Korean Society of WaterJet Technology, pp. 305-312.
  7. Hashish, M., 1998, "The Waterjet as Tool," Proc. 14th ICJT, BHRG, Opening address.
  8. Kim, J.G,, Lee, C.I. and Han, S.S., 2006, "Slotting of Rocks and Concrete Using an Abrasive Suspension Water Jet," 8th Pacific Rim International Conference on Water Jetting Technology & the 12th China Water Jet Technology symposium, Qingdao, China, pp. 146-152.
  9. Kim, J.G. and Park, T.D., 2003, "A study on the effectiveness of an abrasive suspension water jet applied to a microtunneling machine," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song (Eds), Korean Society of WaterJet Technology, pp. 281-295.
  10. Kim, H.M., Lee, C.I., Kim, W.M. and Choi, B.H., 1999. "Rock Cutting with Water Jet and Quantifieol Roughness at Cut Wall, proceedings," pp. 373-379.
  11. Kiyohashi, H., "Progress and future prospects in water jet technology," Journal of Design Engineering of Japan (in Japanese), Vol. 34, No. 9, pp. 277-282.
  12. Lee, C.I., Kim W.M., Kim H.M. and Kim D.I., 1999, "Testing of Waterjet System for Rock Surface Treatment," Proceedings of International Symposium on New Application of Water Jet Technology, Ishinomaki, Japan. Oct. 19-21, pp. 171-178.
  13. Lee, C.I., 2003, "Application of water jet technology to industry in Korea - Current situation and perspective," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song(Eds), Korean Society of WaterJet Technology, pp. 57-68.
  14. Lee, C.I., 2005, "Application of water jet technology to industry in Korea-current situation and perspective," Journal of Jet Flow Engineering, Published the Water Jet Technology Society of Japan, Vol. 22 No. 3, pp. 27-33.
  15. Lee, C.I., Kim, J.K. and Han, S.S., 2007, "Rock cutting using an abrasive suspension water Jet," Proceedings of and the Sixteenth International Symposium on Mine Planning and Equipment Selection (MPES 2007) Tenth International Symposium on Environmental Issues and Waste Management in Energy and Mineral Production (SWEMP 2007), Bangkok, Thailand, December 11-13.
  16. Makoto Kuroda, and Wonho Kang, 2003, "Pipe polymer removing by using an ultra high-pressure water jet," 7th PacificRim International Conference on Water Jetting Technology, Lee, Jeon&Song(Eds), Korean Society of WaterJet Technology, pp. 341-346.
  17. Seo, H.Y., Han, S.S. and Lee, C.I., 2003, "Drilling of Rocks Using an Abrasive Suspension Water Jet," 7th PacificRim International Conference on Water Jetting Technology, Lee, Jeon&Song(Eds), Korean Society of WaterJet Technology, pp. 296-304.
  18. Seo, H.Y., Han, S.S. and Lee, C.I., 2005, "Horizontal drilling of hard rocks using abrasive suspension water jet," Journal of Jet Flow Engineering, Published the Water Jet Technology Society of Japan, Vol. 22 No. 3, pp. 13-20.
  19. Seo, U.H., Lee, C.I. and Song, J.J., 2007, "Study on the abrasive waterjet cutting depth model for Rock Materials," JP Journal of Solids and Structures, Vol. 1, Issue 2, pp. 125-136.
  20. Seo, Y.W., Kim, D.W. and Ramulu, M., 2003, "Abrasive waterjet machined surface characteristics of titanium alloy (Ti6Al4V)," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song(Eds), Korean Society of WaterJet Technology, pp. 331-340.
  21. Seo, Y.W., Ramulu, M., Posinasetti, P. and Hashish, M., 2003, "Abrasive waterjet machining: A cost effective process for polymer composites," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song (Eds), Korean Society of WaterJet Technology, pp. 102-111.
  22. Seo, Y.W. and Ramulu, M., 2006, "Characteristics of Abrasive Waterjet Machined Engineering Plastics (nylon)," 8th Pacific Rim International Conference on Water Jetting Technology & the 12th China Water Jet Technology symposium, Qingdao, China, pp. 247-256.
  23. Seo, Y.W. and Choi, S.J., 2006, "Performance Evaluation of Korean-made Abrasive Waterjet System for Commercial Applications," 8th Pacific Rim International Conference on Water Jetting Technology & the 12th China Water Jet Technology symposium, Qingdao, China, pp. 257-267.
  24. Song, J., Kim, J., Bae, K. and Kwak, C., 2003, "Roughness measurement of disc kerf walls created by abrasive water jet in rock and concrete blocks," 7th Pacific Rim International Conference on Water Jetting Technology, Lee, Jeon&Song(Eds), Korean Society of WaterJet Technology, pp. 155-164.
  25. Summers, D.A., 1995, Water Jetting Technology, E & FN SPON, pp. 28-49.
  26. Water Jet Technology WJTSJ CD, 2010, The 25th Anniversary of Foundation The Water Jet Technology Society of Japan(WJTSJ).
  27. Yun, K.K., Kim, S.K., Choi, S.Y. and Choi, P.G., 2006, "Effect of Hydrodemolition on the Bond Strength of Ves-LMC Overlay," 8th Pacific Rim International Conference on Water Jetting Technology & the 12th China Water Jet Technology symposium, Qingdao, China, pp. 340-348.
  28. 資源.素材学会編, 1996, ウォータージェット掘削.応用 百科' 丸善, pp. 1-42.
  29. 日本 ウォータージェット学会編, 1993, ウォータージェッ ト技術事典' 丸善, pp. 1-28.
  30. 柳井田勝哉' 大橋 昭, 1997, 気中高速水噴流特性に関する研究 (第2報)-霧化液滴領域 について' 日本G鉱業会誌、93巻, 1073号, p. 489.
  31. 小林陵二, 1986, 高速ウォータージェットによる固体材料 の加工(研究展望) 日本ｱ機械学会論文集(B)' 52巻, 483号, p. 3645.
  32. 今中 治, 1984, ウォータージェット加工法の経緯' ウォータージェット' 1巻, 1号, pp. 4-15.
  33. 幾世橋 広, 1999, ウォータージェット技術の進展と将来展望' 設計工学' 34巻, 9号, pp. 277-82.
  34. 幾世橋 広, 2002, ,今村駿介 : 日本の高圧水噴流産業の発展-研究と応用' 噴流工学' 19巻, 1号, pp. 19-31.
  35. ㈱スギノマシン, 2002, ウォータージェットーバリ取り.洗浄技術ハンドブック' スギノマ シン, pp. 54-55.
  36. 八尋暉夫 編, 1996, 最新ウォータージェット工法' 鹿島出版会.