Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

An Experimental Study of Al2017 on Characteristics of the Surface Roughness in Machining Center Processing

머시닝센터 가공에서 Al2017의 표면거칠기 특성에 관한 실험적 연구

  • 김찬영 (한국폴리텍VII 부산캠퍼스 금형학과)
  • Published : 2012.06.30
⟨ Previous Next ⟩

Abstract

Al2017 is typical Duralumin of self-hardening aluminum alloy. It is lightweight, formability and machinability so throughout the industries have widely used automobile, electronics, semiconductor and aircraft as material. A variety of CNC machine tool processing technology, scientific principles and experience have been studied in order to increase accuracy and productivity. Using a machining center is to constant amount of side step and cutting characteristics studied changing depth of cut, revolution per minute and feed rate.

Keywords

References

  1. Park Jong-Nam, Cho Gyu-Jae, Lee Seung-Chul, "A Study on Cutting Characteristics of Ti-6Al-4V alloy in Turning Operation", The Korean Socity of Manufacturing Process Engineers, Vol. 3, No. 1, pp. 81-87, 2004.
  2. Jung, J. S. and J, J. U., "A Study on Cutting Characteristics of Side-rake Angle Adjustment at non-ferrous metals in Turning", The Korean Socity of Manufacturing Process Engineers, Vol. 2, No. 1, pp. 39-44, 2003.
  3. P. G. Petropoules, "The Effect of Feed rate and Tool Nose Radius on Roughness of Finish Turned Surface", Wear, Vol. 23, pp. 299-310, 1973.
  4. Oh Young-Seang, "A Study on the Characteristics of Ball Endmill", M. S. Thesis Mokpo National University, pp. 6-23, 1998
  5. Lee Gi-Jung, "Gibbs CAM ", pp. 141-165, Solution Line, 2001.
  6. 召栗富士雄, 小栗達男, "Manual of standard mechanical design charts", Vol. 5, pp. 3b-32 pp. 3b-40, 2006.
  7. Choi Hyun-Jin, Park Chul-Woo, "Disign of High Speed ​​Spindles Active Monitoring and Control Algorithm", The Korean Socity of Manufacturing Process Engineers, Vol. 10, No. 5, pp. 13-19, 2011.
  8. Han Gyu-Taek, "A Study on the Machining of Die Profile using the CAM systems", The Korean Socity of Manufacturing Process Engineers, Vol. 2, No. 10, pp. 69-74, 2003.