Journal of the Korean Society of Mechanical Technology (한국기계기술학회지)

Korean Society of Mechanical Technology (한국기계기술학회)
권호 표지

Experimental Study on Fracture Behaviour of Double Cantilever Beam Specimen with Aluminum Foam

알루미늄 폼으로 된 이중외팔보 시험편의 파괴 거동에 관한 실험적 연구

  • 최해규 (공주대학교 기계공학과 대학원) ;
  • 조재웅 (공주대학교 기계자자동차공학부)
  • Published : 2012.10.31
⟨ Previous Next ⟩

Abstract

Aluminum foam as porous material in wide use has the excellent mechanical and thermal properties. As adhesive process technique is used by bonding such composites as aluminum foam, fracture toughness at adhesive joint is the main point to investigate. In this study, DCB specimens are manufactured to evaluate the strengths at adhesive joints on the basis of British industrial and ISO international standards. Four kinds of specimens are made by changing the height of the specimen and these experimental results are compared with each other. Energy release rates are also calculated at mode I. As the hight of specimen becomes higher, reaction force and energy release rates become higher. Through the correlation obtained by this study result, aluminum foam material bonded with adhesive can be applied to the real composite structure and mechanical property and fracture toughness are analyzed systematically.

Keywords

References

  1. 김태원, 김병조, 김용, "내충격 성능을 위한 알루미늄 폼재의 밀도와 기하학적 특성", 대한기계학회 춘추학술대회, pp. 11-14, 2007
  2. R. Davidson and R. J. Lee, "Experimental methodologies to determine the fracture properties of adhesive joints", Page 1. Page 2. MTS Adhesives Project 2: Failure Modes and Criteria Report No. 2, 1995
  3. 조재웅, "자동차 그릴 프레임의 내구성 해석", 한국기계기술학회 논문집, 제14권, 제3호, pp. 51-57, 2012
  4. 방승옥외 4인, "알루미늄 폼 및 허니컴 샌드위치 복합재료의 압축실험에 관한 연구", 산학기술학회논문지, 제12권, 제9호, pp. 3802-3807, 2011
  5. A. Pirondi and G. Nicoletto, "Fatigue crack growth in bonded DCB specimens", Engineering Fracture Mechanics, Vol. 71, pp. 859-871, 2004 https://doi.org/10.1016/S0013-7944(03)00046-8
  6. 박성완, "연성접착제를 사용한 접착이음의 강도평가에 대한 해석", 한국기계기술학회 논문집, 제11권, 제 2호, pp. 1-10, 2009
  7. 이택순, 최영근, "단소섬유/에폭시 복합재료의 Mode I 층간파괴거동에 미치는 섬유배향각의 영향에 관한 연구", 대한기계학회 논문집, 제19권, 제2호, pp. 391-401, 1995
  8. British Standard, BS 7991, "Determination of the Mode I Adhesive Fracture Energy GIC of Structure Adhesives Using the Double Cantilever Beam (DBC) and Tapered Double Cantilever Beam (TDCB) Specimens", Imperial College of Science and Technology(JISC), pp. 3-13, 2001
  9. International Standards Organization, ISO 11343, Geneva(Switzerland), 1993
  10. ASTM, ASTMD3433, in Annual book of ASTM standards, Adhesives section 15, Philadelphia, 1990