Journal of Korean Society on Water Environment (한국물환경학회지)

Korean Society on Water Environment (한국물환경학회)
권호 표지

Design of Residual Treatment Process with Filter Backwash Recycle System

역세척수 회수시스템이 포함된 배출수처리공정의 설계

  • Bae, Byung-Uk (Department of Environmental Engineering, Daejeon University) ;
  • Choi, Kyung-Hwan (Department of Environmental Engineering, Daejeon University)
  • Published : 2012.01.30
⟨ Previous Next ⟩

Abstract

In this study, both sedimentation and thickening experiments were conducted for residuals produced from an advanced water treatment plant for more accurate and practical design of residual treatment train. In order to design a backwashed residual sedimentation basin (SRSB) in the filter backwash water recycle system, two kinds of backwash waters, one from sand filter (SFBW) and the other from GAC adsorption bed (GACBW), were separately collected and their surface loading rate measured. In addition, in order to design a gravity thickener, batch thickening tests were conducted for concentrated residuals taken from sedimentation basin and their limiting solid flux ($SF_{L}$) measured. From the experimental results and consideration of the seasonal characteristics of the residual, surface loading rate of $70m^{3}/m^{2}{\cdot}d$ was proposed as a design parameter for SRSB and solid loading rate of 20 kg $TS/m^{2}{\cdot}d$ was proposed as a design parameter for gravity thickeners. Finally, the material mass-balance was made for the design of each unit process in the residual treatment train.

Keywords

References

  1. 배병욱, 신성해(2009). 세라믹 막 정수공정에서 발생하는 배출수의 농축특성, 수질보전 한국물환경학회지, 25(5), pp. 764-767.
  2. 배병욱, 허국, 주대성, 정연구, 김영일, 하창원(2007). 정수장배출수처리시설 설계 프로그램의 개발, 대한환경공학회지, 29(3), pp. 277-282.
  3. 한국수자원공사(2002). 원수특성을 고려한 배출수처리시설 최적설계 연구 최종보고서, pp. 671-675.
  4. 한국수자원공사(2005). Solid Flux 이론에 근거한 배출수처리 시설 설계인자의 실공정 검증연구 최종보고서, pp. 319-320.
  5. 환경부(2010). 상수도시설기준, pp. 680.
  6. APHA, AWWA, WEF (2005). Standard Methods for the Examination of Water and Wastewater, 21th edition, Washington DC., USA. pp. 2-82-83.
  7. Cornwell, D. A. (1999). Water Treatment Plant Residuals Management, Water Quality and Treatment, AWWA, 5th ed., McGraw-Hill, pp. 16.1-16.24.
  8. Metcalf & Eddy (1991). Wastewater Engineering : Treatment, Disposal, Reuse. 3rd ed., Mcgraw-Hill, pp. 229-240.
  9. Qasim, S. R., Motley, E. M., and Zhu, G. (2000). Water Works Engineering - Planning, Design, and Operation, Prentice Hall PTR, pp. 415-428.