Methodology for the Identification of Impaired Waters Using LDC for the Management of Total Maximum Daily Loads

오염부하지속곡선(LDC)을 이용한 수질오염총량관리 단위유역 목표수질 달성여부 평가방법

  • Park, Jun Dae (Water Pollution Load Management Research Division, Water Environment Research Department, National Institute of Environmental Research) ;
  • Oh, Seung Young (Water Pollution Load Management Research Division, Water Environment Research Department, National Institute of Environmental Research)
  • 박준대 (국립환경과학원 물환경연구부 수질총량연구과) ;
  • 오승영 (국립환경과학원 물환경연구부 수질총량연구과)
  • Published : 2012.09.30

Abstract

Load Duration Curve(LDC) is a useful tool for analyzing water quality characteristics under various stream flow conditions. This study investigated the methods to identify impaired waterbodies in the assessment of water quality goal attainment by using LDC for the management of Total Maximum Daily Loads (TMDLs). Three methods were proposed. Non-typical regime exclusion method is a method to exclude water quality observations in the non-typical extreme flow conditions in order to minimize the influence of non-ordinary water quality. Flow regime weighted average method is a method to calculate weighted mean water quality instead of arithmetic mean in order to consider water characteristics properly on stream flow regime in addition to the effect of Non-typical regime exclusion method. Load exceeded interval comparison method is a method to compare the intervals between the attained and non-attained load duration periods on the LDC. The assessment of water quality goal attainment can be performed more reasonably and precisely considering water quality variations on stream flow conditions by applying these proposed methods.

Keywords

References

  1. 강두기, 강순구, 김상단, 신현석(2007). 오염총량평가를 위한 부하지속곡선의 개발 및 적용, 한국수자원학회, 한국수자원학회 학술발표회 논문집, pp. 652-656.
  2. 강현우, 류지철, 신민환, 최중대, 최재완, 신동석, 임경재(2011). 수질오염총량제도 유역의 수질 및 부하량 평가를 위한 웹기반 LDC 시스템의 적용, 수질보전 한국물환경학회지, 27(5), pp. 689-698.
  3. 국립환경과학원 물환경정보시스템(2009). http://www.nier.go.kr/.
  4. 박준대, 오승영(2012). 수질오염총량관리 단위유역 유량측정 자료를 이용한 유황곡선 작성, 수질보전 한국물환경학회지, 28(2), pp. 224-231.
  5. 박준대, 오승영, 최옥연(2011). 수질오염총량관리 단위유역의 유량변화 특성분석-금강수계을 대상으로-, 수질보전 한국물환경학회지, 27(6), pp. 914-925.
  6. 한수희, 신현석, 김상단(2007). 낙동강 유역관리를 위한 부하량 유황곡선의 적용 가능성, 수질보전 한국물환경학회지, 23(5), pp. 620-627.
  7. 환경부(2007), 수질 및 수생태 보전에 관한 법률, pp. 1-375.
  8. 환경부(2008a), 수질 및 수생태계 목표기준(환경부고시 제 2008-21호), pp. 1-5.
  9. 환경부(2008b), 금강수계 물관리 및 주민지원 등에 관한 법률, pp. 1-112.
  10. 환경부(2009), 수질오염총량관리를 위한 목표수질/유량측정 사업 통합운영지침, pp. 1-32.
  11. 환경부(2010), 제2단계 수질오염총량관리 기본방침(환경부훈령 제923호), pp. 1-29.
  12. 황하선, 윤춘경, 김지태(2010). 수질오염총량 단위유역의 유량조건별 수체 손상 평가를 위한 부하지속곡선 적용성 연구, 수질보전 한국물환경학회지, 26(6), pp. 903-909.
  13. Kim, J., Engel, B. A., Park, Y. S., Theller, L., Chaubey, I., Kong, D. S., and Lim, K. J. (2012). Development of Webbased Load Duration Curve System for Analysis of Total Maximum Daily Load and Water Quality Characteristics in a Waterbody. Journal of Environmental Management, 82, pp. 46-55.
  14. Nevada (2003). Load Duration Curve Methodology for Assessment and Total Maximum Daily Load Development, Nevada Division of Environmental Protection, pp. 1-3.
  15. USEPA (2007), An Approach for Using Load Duration Curves in the Development of Total Maximum Daily Loads, EPA 841-B-07-006, pp. 1-68.