Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

Design of PI-PD Controllers to Improve a Response Characteristic in Position Control System

위치제어계에서 응답특성 개선을 위한 PI-PD제어기의 설계

  • 김종혁 (한국폴리텍대학 구미캠퍼스 전기과)
  • Received : 2012.01.25
  • Accepted : 2012.05.31
  • Published : 2012.08.15
Download PDF
⟨ Previous Next ⟩

Abstract

In many control fields high position performance is essentially required in reducing the over-shoot phenomena which is produced by improving the quick response in starting and in minimizing the variation of the response characteristic on disturbance and load variation In this paper, the design method for a position control is suggested for constructing the PI-PD controllers by using an internal PD feedback loop in PI and PD control system. Applying this method to the position control system used a DC servo motor as a driver, the transfer PI and PD controllers are designed simultaneously and the coefficients of these controllers are determined by using the transfer function of a plant and a proportional coefficient from mathematical technique. From the result of computer simulation in PI-PD control system by applying this control technique, we can verify the usefulness of this method in rejecting of over-shoot of starting, compensating of response variation on the load variation, and shorting the settling time.

Keywords

References

  1. Ha, H. G., and Lee, C. H., 2007, "Implementation of the Two-degree-of-freedom PID Position Controller for Linear Motor Drive with Easy Gain Adjustment," Journal of the Institute of Signal Processing and Systems, Vol. 8, No. 2, pp. 124-129.
  2. Kim, S. D., 2009, "Design of the PD Controller in the I-PD Control System for Position Control," Journal of the Institute of Signal Processing and Systems, Vol. 10, No. 4, pp. 262-266.
  3. Kim, S. G., Park, G. W., and Koh, T. E., 2001, "Construction of I-PD Neuro Control System using Sliding Surface," The Research Institute of Industrial Technology Development, Vol. 15, pp. 179-187.
  4. Balestrino, A., Mario, G., and Sciacco, I., 1988, "Hyperstable Adaptive Model Following Control of Nonlinear Plants," System and control Letters, Vol. 1, No. 4, pp. 232-236.
  5. Choe, Y. W., and Lee, H. K., 2010, "Periodic Disturbance Cancellation by using Dual-Input Describing Function (DIDF) Method," The Transactions of The Korean Institute of Electrical Engineers, Vol. 59, No. 1, pp. 168-175.
  6. Cho, J. H., and Hwang, H. S., 2009, "Auto-tuning of PID Controllers with IMC Structure," Journal of the Institute of Electronics Engineers of korea, SC, Vol. 46, No. 3, pp. 8-14.
  7. On, K. P., Lee, J. S., Arm, J. S., and Lee, Y. E., 2009, "Auto-tuning of PID/PIDA Controllers based on Stepresponse," Journal of Institute of Control, Robotics and Systems, Vol. 15, No. 10, pp. 974-981. https://doi.org/10.5302/J.ICROS.2009.15.10.974
  8. Wang, Q. -G., Lee, T. -H., Fumg, H. -T., Bi, Q., and Zhang, Y., 1999, "PID Tuning for Improved Performance," IEEE, Trans, Contr, Syst, Technol., Vol. 7, No. 4, pp. 457-465. https://doi.org/10.1109/87.772161
  9. Tan, N., 2009, "Computation of Stabilizing PI-PD Controller," International Journal of Control Automation and Systems, Vol. 7, No. 2, pp. 175-184. https://doi.org/10.1007/s12555-009-0203-y
  10. Park, G. W., 2011, "A Study on Current, Velocity, Position Gain Tuning Technique of Servo Position Controller using Simulation," Journal of Institute of Control, Robotics and Systems, Vol. 17, No. 7, pp. 634-640. https://doi.org/10.5302/J.ICROS.2011.17.7.634
  11. Moon, J. H., and Lee, B. G., 2011, "Design of a Robust Position Tracking Controller with Sliding Mode For a 6-DOF Micropositioning Stage," Transactions of the Korean Society of Manufacturing Technology Engineers, Vol. 20, No. 2, pp. 121-128.

Cited by

  1. 전동기 위치 제어를 위한 PI-PD 제어기 설계 vol.22, pp.1, 2012, https://doi.org/10.6113/tkpe.2017.22.1.60