Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Fast Injection Response Characteristics Between Solenoid and Piezo-Driven Injector

솔레노이드 및 피에조 인젝터의 고속분사 응답성 해석

  • Received : 2012.02.06
  • Accepted : 2012.07.31
  • Published : 2012.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

It is well known that the performance of a diesel injector is directly related to the power, emission, and fuel consumption of the diesel combustion engine. In this study, the injection response characteristics of CRDi injectors driven by a solenoid coil and a piezoceramic were investigated by using the AMESim simulation code. Some analytical parameters such as the fuel pressure and hole diameter were considered. From this study, it was shown that the piezo-driven injector had a faster response and had better control capability than the solenoid-driven injector. In addition, it was found that the piezo-driven injector can be utilized more effectively in a multiple injection scheme than a solenoid-driven injector.

고압 인젝터의 성능은 디젤 연소엔진의 동력, 배출물, 연료소모와 직접적인 관계가 있다. 본 논문에서는 솔레노이드 코일과 피에조 세라믹으로 구동되는 커먼레일 디젤 분사용 인젝터의 응답 특성을 AMESim 코드를 사용하여 상대 비교 연구를 수행하였다. 따라서 연료압력, 분공경을 주요 해석변수로 설정하였다. 본 연구를 수행한 결과, 솔레노이드 구동 인젝터에 비해 피에조 구동 인젝터가 상대적으로 더 빠른 응답성과 더 높은 제어성을 가짐을 알 수 있었으며, 특히 다단분사 적용시, 이런 결과가 매우 효과적임을 확인할 수 있었다.

Keywords

References

  1. Pettes, C. and Leipertz, A., 2001, "Potentials of a Piezo-Driven Passenger Car Common Rail System to Meet Future Emission Legislation - An Evaluation by Meas of In-Cylinder Analysis of Injection and Combustion," SAE Paper 2001-01-3499.
  2. Lee, J., 2005, "Study on Driving Performance, Spray Characteristics and Cavitation Flow of a Piezo- Driven Diesel Injector," Doctoral Dissertation, Seoul National University.
  3. Boehner, W. and Hummel, K., 1997, "Common Rail Injection System for Commercial Diesel Vehicles," SAE Paper No. 970345
  4. Bianchi, G. M., Pelloni, P., Filicori, F. and Vannini, G., 2000, "Optimization of the Solenoid Valve Behavior in Common-Rail Innjection Systems," SAE Paper No. 2000-01-2042.
  5. Hwang, J. W., Kal, H. J., Park, J. K. and Chae, J. O., 1999, "A Numerical Study for the Design of Fast Solenoid," Transactions of Korea Society of Automotive Engineers, Vol. 7, No. 3, pp. 94-102.
  6. Lee, J.-W. and Min, K.-D., 2006, "Analysis of Macroscopic Spray Characteristics of Diesel Injectors with Three Different Needle Driving Type in Common Rail Direct Injection System," Journal of the Korean Society of Marine Engineering, Vol. 30, No. 3, pp. 351-358.
  7. American National Standard : IEEE Standard on Piezoelectricity, ANSI/IEEE Standard, 1987
  8. Hountalas, D. T. and Kouremenos, A. D., 1998, "Development of a Fast and Simple Simulation Modelfor the Fuel Injection System of Diesel Engines," Advanced in Engineering Software, Vol. 29, No. 1.
  9. Bianchi, G. M., Falfari, S., Parotto, M. and Osbat, G., 2003, "Advanced Modelling of Common Rail Injector Dynamics and Comparison with Experiments," SAE 2003-01-0006.
  10. Chiavola, O. and Giulianelli, P., 2001, "Modelling and Simulation of Common Rail System," SAE 2001-01-3183.